Skip to content

What size is the oil drain plug on a 2004 toyota corolla?

Dorman – Autograde – Oil Drain Plug Standard M12-1.25, Head Size 14mm (Part No. 090-038CD)

What size is the Toyota Corolla oil plug?

All plugs have 14mm hex – just one wrench works for all.

What is the size for drain plug on 2003 Toyota Corolla?

Dorman – Autograde – Oil Drain Plug Pilot Point M12-1.25, Head Size 13mm (Part No. 090-049CD)

What size socket is my oil drain plug?

Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.

What size is the oil drain plug bolt?

Oil Drain Plug Standard M14-1.50, Head Size 17mm.

How much oil does a Toyota Corolla take?

Open the hood and find the oil cap on top of the engine. Pour in 3.5 to 4 quarts of new oil. Take your time adding new oil to avoid making a mess and/or overfilling it.

What size is oil drain plug on 2002 Camry?

Dorman – Autograde – Oil Drain Plug Pilot Point M12-1.25, Head Size 13mm (Part No. 090-049CD)

How do you put oil in a 2004 Toyota Corolla?

Dorman – Autograde – Oil Drain Plug Pilot Point M12-1.25, Head Size 13mm (Part No. 090-049CD)

How much oil do you put in a 2003 Toyota Corolla?

Capacity: With filter 4.4 quartsCapacity shown is in combination with updated dipstick P/N 15301-22050.

What type of oil does a 2005 Toyota Corolla use?

You can find SAE 5W-30 oil for your 2005 Toyota Corolla if you want to know what kind of oil to use. You can use SAE 10W-30 if you can’t find any 5W-30.

How do I know what size drain plug I have?

Measure Diameter

Measure the width of the plug at the widest part of the threads. If your plug measures 12mm you will need to start looking at plugs in the size range of “M12 x 1.25 to M12 x 1.75″. The “M12” refers to the diameter you measure from the widest part of the threads on your OEM sump plug.

What is the socket size?

Metric Socket Sizes Chart

3/8″ Drive 1/4″ Drive 1/2″ Drive
7mm 5mm 10mm
8mm 5.5mm 11mm
9mm 6mm 12mm
10mm 7mm 13mm

Are drain plugs universal?

This plug is universal. It should fir on any oil pan. The only thing about it is that it is intended to be permanent. In other words, you don’t want to unscrew it too often to replace the oil.

How do you remove an oil drain plug?

You’ll need to spray penetrating oil on the oil plug and leave it to sit for several hours. Then you can take a small hammer and tap counterclockwise to ensure that you are loosening the plug.

What size is oil drain plug 5.3 Vortec?

The oil drain plug on a chevy silverado is 15mm.

Are oil drain plugs reverse threaded?

it is regular-threaded. Righty tighty. Also, as the plug is threaded into aluminum, I like to use a torque wrench on mine so as not to over tighten. Proper torque for the drain plug is 18 lb/ft.

How much oil does a 2004 Corolla?

Engine Oil

If SAE 5W-30 is not available, SAE 10W-30 may be used. However, it must be replaced with SAE 5W-30 at the next oil change. Capacity: With filter 4.4 quartsCapacity shown is in combination with updated dipstick P/N 15301-22050.

What type of oil does a 2004 Toyota Corolla take?

It is recommended that you use a sae 5w-30 full synthetic motor oil for the 2004 toyota corolla.

How long can a Toyota Corolla go without an oil change?

How often does a Toyota Corolla need an Oil Change? An oil change is one of the most necessary and crucial services for your car. Synthetic oil regularly should be changed every 7,500 – 10,000 miles. Toyota recommends getting your Toyota Corolla oil &amp, filter changed every 3,000-5,000 miles for conventional oil.

What size is the oil plug on a Toyota Camry?

All plugs have 14mm hex – just one wrench works for all.

How much oil does a 2005 Camry take?

The type of oil that should be used in the 2005 Toyota Camry iS5W-30 Synthetic for the 2.4 L 4Cylinder, 3.0 L V6 and the 3.3 L V6 engine. The capacity for the car iS4 quarts with a filter for the 2.4 L 4Cylinder, 5 quarts with a filter for the 3.0 L V6 and the 3.3 L V6 engine.

What size is the oil drain plug on a Honda Civic?

Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033.1)

What is SAE 5w30?

5w30 is a motor oil that is widely used in light-duty petrol and diesel engines. Like most motor oils produced today, 5w30 is a multi-grade oil, meaning it ranges from a lower viscosity grade of 5 to a higher viscosity grade of 30.

What kind of oil does a Toyota Corolla take?

All Toyota engines should be serviced with motor oil grade 5W-30. The viscosity of this oil is higher for four and six cylinder engines. It is recommended that you change this oil type every 3,000 miles by Toyota.

How do you reset the oil change light on a Toyota?

Push and hold the trip meter reset button on the dashboard, then turn your key to the second position. Continue to hold the odometer button for 10 seconds total. This should cause the light to flash, possibly beep, then turn off. After it’s off, release the odometer button then start the car.