Skip to content

How much does it cost to replace wheel bearings on a toyota camry?

How many wheel bearings does a Toyota Camry have?

Your car has four bearings, one for each wheel.

How long do Toyota wheel bearings last?

How Long Do Wheel Bearings Last? Although wheel bearings are engineered to last the entire lifespan of your vehicle, they can break and get worn out. Most wheel bearings last about 85,000 to 100,000 miles before they need to be replaced.

How much are wheel bearings for Toyota Camry?

Toyota Camry Wheel Bearing Replacement Cost Estimate. The average cost for a Toyota Camry wheel bearing replacement is between $249 and $391. Labor costs are estimated between $192 and $242 while parts are priced between $56 and $149.

How much does it cost to fix a wheel bearing on a Toyota?

What’s the cost for wheel bearing replacement on my Toyota

For a national average across all vehicles, the average cost to replace the wheel bearings (for 1 wheel) is about $350 (including parts and labor).

How much does it cost to replace ball bearings?

On average, a wheel bearing will set you back $50 to $120, while a new wheel hub costs around $200 to $500. Be careful when buying new bearings and wheel hubs as many cheap parts are unfortunately of low quality.

How do you fix a wheel bearing?

Part 1 of 3: Prepare your car

  1. Materials Needed.
  2. Step 1: Put chocks behind your wheels. …
  3. Step 2: Loosen the lug nuts. …
  4. Step 3: Lift up the vehicle. …
  5. Step 4: Remove the lug nuts. …
  6. Step 1: Remove the brake caliper and bracket. …
  7. Step 2: Remove the outer wheel bearing. …
  8. Step 3: Remove the rotor and inner wheel bearing.

Can I drive my car if the wheel bearing needs to be replaced?

Q: Is it safe to drive with a bad wheel bearing? A: No. It can, in fact, be very dangerous to drive if one of your bearings is worn out, especially since it may cause the wheel to stop while driving. Additionally, a damaged wheel bearing puts a lot of stress on the hub, the CV joint, and the transmission itself.

How do I know if my wheel bearing needs replacing?

Top Warning Signs Your Wheel Bearings Need Replacement

  1. Humming Noise. The most easily identifiable and common symptom of bad wheel bearings is audible. …
  2. Squealing, Growling. …
  3. Clicking Sound. …
  4. Wheel Wobble. …
  5. ABS Failure. …
  6. Uneven Tire Wear. …
  7. Vehicle Pulls to One Side. …
  8. Steering Wheel Vibration.

Should you replace both wheel bearings at the same time?

Both wheel bearings have racked up the same number of miles, so it’s logical to conclude that both sides have probably experienced the same amount of wear. Based on this line of thinking, it would make sense to recommend replacing both wheel bearing hubs at the same time even though only one has obviously failed.

How do you tell which wheel bearing is bad front or back?

You can test this by gently swaying your car while driving slowly. If the noise lessens when you sway right, then the damaged bearing is likely on a left wheel bearing. If it lessens when you sway left, a right wheel bearing is likely broken.

How much is a rear wheel bearing?

As for the rear wheel bearings, they will be a tad cheaper to replace but this will of course depend on the car make and model. The cost of a complete rear wheel bearing replacement will be somewhere in area of $240 to $460. Parts will on average be between $100 and $180. The labor costs will be around $140 to $280.

What are wheel bearings?

A wheel bearing is a crucial part of the wheel assembly that connects the wheel and the axle. It is a set of steel balls (ball bearings) or tapers (tapered bearings), held together by a metal ring. It enables the wheel to rotate smoothly with a minimum of friction.

How long will a wheel bearing last once it starts making noise?

However, a wheel bearing can last an average of anywhere from 136,000 to 160,000 km which is about 85,000 to 100,000 miles.

How much does it cost to replace front wheel bearings?

The average cost for wheel bearing replacement is between $265 and $347. Labor costs are estimated between $158 and $200 while parts are priced between $107 and $147. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How long does it take to replace a wheel bearing?

Replacing a single wheel bearing can take 90 to 120 minutes depending on the type of vehicle and complexity. There are a lot of moving parts that need to be maintained and properly sealed to complete this type of work.

How many wheel bearings does a car have?

4 wheel bearings. 3 engine distribution bearings: 1 bearing for each of the 2 idler rollers, 1 for the water pump. 2 bump stops-suspension bearings (MacPherson) 2 seat adjustment bearings (roller freewheels for height adjustment)

Do wheel bearings affect brakes?

If you have a faulty or loose wheel bearing, the rotor will wobble on its axis. This wobble causes the rotor to push the caliper piston into its bore (See Image 2). Now, when you hit the brake pedal, the piston has to travel farther than normal to apply the brakes. This causes a low or spongy brake pedal.

Is it hard to replace a wheel bearing?

Is it easy to replace a wheel bearing at home? Replacing a wheel bearing that comes as an assembly with the hub and bolts to the spindle or steering knuckle is not very difficult if you have proper skills, tools and the manual. Of course, the large axle nut is very tight and can be difficult to remove.

What causes wheel bearings to go bad?

Frequently driving through mud, water, or road salt can cause wheel bearing malfunction. Contaminants can get past the seals and enter the bearings, which pollutes the grease and damages the bearings.

What happens when a wheel bearing goes out while driving?

If your wheel bearing fails, it can cause the wheel to stop while you are driving or possibly even to fall off. At the very least, before a wheel falls off, a failed wheel bearing can/will cause significant damage to your vehicle, so it’s very important to keep an eye on these and keep them maintained.

How long can I drive on a bad wheel bearing?

As to the distance covered on a bad wheel bearing, you shouldn’t exceed 1000 miles regardless of your speed. Driving distances over 1000 miles could lead to more severe complications and also puts your safety in jeopardy. Moving at a slow and steady speed of 40mph would be a good idea.

Can you replace one wheel bearing at a time?

It’s usually safe to replace only one bearing that’s been damaged by a curb or pothole. If the bearings are simply worn, think hard about doing both sides at the same time. You also may be able to save some labor costs if your brake rotors and pads could use replacing at the same time.

Can a bad wheel bearing cause transmission problems?

Continuing to drive with a bad wheel bearing is very dangerous. A faulty wheel bearing will affect many other important components on your vehicle like the hub, CV joint, axle and even the transmission. Even worse, if a damaged wheel bearing fails completely, the wheel will seize and you will have an accident.

What do bad wheel bearings sound like?

Continuing to drive with a bad wheel bearing is very dangerous. A faulty wheel bearing will affect many other important components on your vehicle like the hub, CV joint, axle and even the transmission. Even worse, if a damaged wheel bearing fails completely, the wheel will seize and you will have an accident.

What causes a loud humming noise while driving?

If your car makes a humming noise, it could mean the differential needs lubricant, the transmission is failing or the universal joints or wheel bearings are wearing out.

Does a wheel bearing noise come and go?

Speed may also contribute to the noise from the wheel bearing. Sometimes you may be driving at 60 MPH and hear the noise, but then accelerate to 65 MPH and the noise goes away. This may happen only if there is a small amount of damage to the bearing. Therefore, you may not be able to notice this right away.

Do I need to replace the hub assembly or just the bearing?

Your wheel bearing may have been damaged slightly in the past and has now worn to the point it is starting to make noise. Your mechanic is correct in that the only repair for the bearing is to replace the hub. It is a sealed unit and cannot be disassembled without destroying it.