Skip to content

How much does it cost to replace a serpentine belt on a toyota corolla?

Is Replacing a serpentine belt expensive?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.

How long does a Toyota serpentine belt last?

Check the Belt for Wear

According to Popular Mechanics, a new serpentine belt can last 150,000 miles. But if you bought your Toyota new, you’ll need to change your serpentine belt after about 30,000 to 60,000 miles.

How long does a serpentine belt last on a Toyota Corolla?

Being made of durable rubber, a serpentine belt can last anywhere from around 50,000-100,000 miles. Learn when to replace a serpentine belt and more with the service center at Westbrook Toyota.

How much does it cost to change the serpentine belt in a Toyota?

Toyota Corolla Serpentine Belt Replacement Cost Estimate. The average cost for a Toyota Corolla serpentine belt replacement is between $78 and $97. Labor costs are estimated between $48 and $61 while parts are priced between $30 and $36.

How long does it take to change a serpentine belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

How do I know if I need to replace my serpentine belt?

The easiest way to know that a new serpentine belt is needed is if you hear it squealing while the engine is running. A heavy rainstorm might cause a bit of squealing, but if there are any fluid leaks, it’s time to replace it right away.

Does Toyota Corolla have a serpentine belt?

A failing drive belt could affect the performance of your vehicle’s auxiliary systems, not to mention a loud squealing sound from under the hood. Consider having having your drive belt inspected or replaced to keep your Toyota Corolla running at its best. From 200706 to 201407.

When should a timing belt be replaced on a Toyota Corolla?

Most timing belts will need to be replaced as part of regular maintenance every 60,000 to 100,000 miles, and most related problems are caused by not replacing it when you’re supposed to. If the timing belt is starting to go bad, the engine will run poorly and the check engine light will likely come on.

Can you drive with a cracked serpentine belt?

There are a couple of factors influencing the answer to this question, but on average, your car should be able to run between 20-90 minutes with a broken serpentine belt. The engine will overheat faster without a functioning cooling system on a hot day, so your driving window is less.

What is drive belt Corolla?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump.

When should I replace my serpentine belt 4runner?

Typically, belt manufacturers recommend belt replacement at 90,000 miles.

How do you change a belt on a 2010 Toyota Corolla?

Typically, belt manufacturers recommend belt replacement at 90,000 miles.

What does a worn serpentine belt sound like?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery. If a car has a hydraulic power steering pump, the steering will become stiff.

Can I replace serpentine belt myself?

Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.

Does Walmart replace serpentine belts?

Walmart does replace serpentine belts at some Auto Care Centers as of 2022. The price can range from $150 – $200 for replacing the serpentine belt, which includes the belt and labor. It is recommended to call your local Walmart Auto Care Center beforehand to see if the store offers this service.

How much does a new fan belt cost?

The alternator belt replacement cost (also known as serpentine belt, v-belt, drive belt or fan belt) are made up of material costs (approx. £20 – £30) and labour costs (approx. £60 – £200). For most vehicles, costs of around £80 – £230 can be expected.

How do I test my serpentine belt?

Here are tips for inspecting belts:

  1. Look for cracks, fraying, or splits on the top cover.
  2. Look for signs of glazing on the belt’s sides. Glazed or slick belts can slip, overheat or crack.
  3. Twist a serpentine belt to look for separating layers, cracks, or missing chunks of the grooves on the underside.

What are the signs of a timing belt going bad?

Symptoms of a Bad or Failing Timing Belt

  • You Hear A Ticking Noise Coming From The Engine. …
  • Your Car’s Engine Won’t Turn Over. …
  • You Notice An Oil Leak Near The Motor. …
  • You Experience Exhaust Issues. …
  • Your Revs Start Acting Up.

Is a serpentine belt the same as a timing belt?

Timing Belt. Don’t get confused—a serpentine belt is not the same thing as a timing belt. The serpentine belt and timing belt have very different functions in your vehicle. The timing belt is located inside the engine and keeps the crankshaft and camshaft in sync.

What happens if the serpentine belt breaks?

If your serpentine belt wears out, becomes damaged or contaminated, or breaks, engine accessories will not be able to spin at the proper speed, leading to decreased power to the electrical system.

How do you change a belt on a Toyota Corolla?

If your serpentine belt wears out, becomes damaged or contaminated, or breaks, engine accessories will not be able to spin at the proper speed, leading to decreased power to the electrical system.

What causes a serpentine belt to break?

The most serious failure is when the serpentine belt breaks completely. This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt. A failed bearing in a pulley being driven by the serpentine belt will also cause the belt to break.

Does Toyota Corolla have timing belt or chain?

1998 or newer toyota corolla cars do not have timing belts – they have chains. However, corolla cars made between 1990 and 1997, use a timing belt that needs to be replaced every 60,000 miles.

How much is a timing belt for a 2010 Toyota Corolla?

The real cost is in the labor, because a lot of parts need to be disassembled to get to the belt. Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor).

Is a timing belt expensive?

If your timing belt is in need of replacement, you can expect that service to cost anywhere from $300 up to $500. Because the timing belt is not easily reachable on many vehicles there is a good bit of disassembly and reassembly needed to get to the belt. Economy cars with smaller engines require less labor.

How long will cracked serpentine belt last?

How long will a cracked serpentine belt last? Serpentine belts typically last between 60,000 and 100,000 miles (although some claim that they last anywhere between 30,000 to 150,000 miles).

Does a 2010 Toyota Corolla have a serpentine belt?

A failing drive belt could affect the performance of your vehicle’s auxiliary systems, not to mention a loud squealing sound from under the hood. Consider having having your drive belt inspected or replaced to keep your 2010 Toyota Corolla running at its best. From 201003 to 201103.

How do you change a serpentine belt?

A failing drive belt could affect the performance of your vehicle’s auxiliary systems, not to mention a loud squealing sound from under the hood. Consider having having your drive belt inspected or replaced to keep your 2010 Toyota Corolla running at its best. From 201003 to 201103.

How much is an alternator for a 2010 Toyota Corolla?

We currently carry 20 Alternator products to choose from for your 2010 Toyota Corolla, and our inventory prices range from as little as $159.99 up to $721.99.

How much does it cost to replace a serpentine belt on a 4Runner?

The average cost for a Toyota 4Runner serpentine belt replacement is between $95 and $108. Labor costs are estimated between $49 and $62 while parts are priced at $46. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed.

How many belts does a Toyota 4Runner have?

The Toyota 4Runner model vehicles come equipped with two different types of alternator belts. The first belt is a V-belt that controls each engine accessory separately. The second belt is a serpentine belt that controls the alternator and all of the other engine accessories at the same time.

How do you change a serpentine belt on a 2008 Toyota 4Runner?

The Toyota 4Runner model vehicles come equipped with two different types of alternator belts. The first belt is a V-belt that controls each engine accessory separately. The second belt is a serpentine belt that controls the alternator and all of the other engine accessories at the same time.

How do you change a serpentine belt on a 2011 Toyota Corolla?

The Toyota 4Runner model vehicles come equipped with two different types of alternator belts. The first belt is a V-belt that controls each engine accessory separately. The second belt is a serpentine belt that controls the alternator and all of the other engine accessories at the same time.

How much is an alternator for a 2011 Toyota Corolla?

2011 Toyota Corolla Alternator – from $139.99+ | AutoZone.com.

How tight should a serpentine belt be?

The required measure of tension in the serpentine belt is that it should not deflect more than ½ inch when twisted either way from the middle. If twisted more, the belt is loose, and if twisted less, the belt is too tight.

How much does it cost to replace a serpentine belt and tensioner?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.