Skip to content

Does a 2011 toyota camry have a serpentine belt?

A failing drive belt could affect the performance of your vehicle’s auxiliary systems, not to mention a loud squealing sound from under the hood. Consider having having your drive belt inspected or replaced to keep your 2011 Toyota Camry running at its best.

How many serpentine belts does a Toyota Camry have?

The drive belt/s on your Toyota Camry uses the engine revs to power the accessories in or on the engine of your vehicle. These may include your power steering, water pump air conditioning compressor and alternator. Most Toyota Camry’s have 1 or 2 drive belts and in some instances, it may be called a serpentine belt.

When should a serpentine belt be replaced on a Toyota Camry?

Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage. Squealing noise, belt slippage, visible belt damage.

How do you put a serpentine belt on a 2011 Toyota Camry?

Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage. Squealing noise, belt slippage, visible belt damage.

How long does serpentine belt last Toyota Camry?

How long does a serpentine belt last? Being made of durable rubber, a serpentine belt can last anywhere from around 50,000-100,000 miles.

How much does it cost to replace a serpentine belt on a Toyota Camry?

The average cost for a Toyota Camry serpentine belt replacement is between $95 and $116. Labor costs are estimated between $61 and $77 while parts are priced between $34 and $39.

How long does a Toyota serpentine belt last?

According to Popular Mechanics, a new serpentine belt can last 150,000 miles. But if you bought your Toyota new, you’ll need to change your serpentine belt after about 30,000 to 60,000 miles. The process isn’t difficult and doesn’t take any special tools.

How long does it take to replace a serpentine belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

How often should I replace serpentine belt?

Under ideal circumstances, your car’s serpentine belt should last 60,000–100,000 miles. It’s important to replace this belt as part of your vehicle’s scheduled maintenance (even if it looks okay) to avoid it breaking while you’re on the road.

How do you change a serpentine belt on a Toyota?

Here’s a general overview of the process:

  1. Make sure the engine is off and cool.
  2. Open the hood.
  3. Disconnect the battery.
  4. Loosen the tension pulley. …
  5. Remove the old serpentine belt.
  6. Install the new serpentine belt. …
  7. Connect the battery.
  8. With the hood open, start the engine.

How do you change a belt on a Toyota Camry?

  1. Fan belt replacement: Check the tensioner first. Check for excessive movement. …
  2. Check the pulley/roller. Rotate the tensioner and slide the drive belt off the pulley/roller. …
  3. Measure wear with an app. …
  4. The right tools make it a do-it-yourself project. …
  5. Remove the belt with a serpentine belt tool. …
  6. Place the new belt.

How do you change a serpentine belt on a 2012 Toyota Camry?

Procedure

  1. Open the hood. …
  2. Locate the serpentine belt on the passenger side of the engine compartment.
  3. Release the tension on the tensioner pulley by putting a 14mm wrench on the bolt and pulling it.
  4. Pull out the serpentine belt once the tension is released.

How do you change a serpentine belt on a 2014 Toyota Camry?

Procedure

  1. Open the hood. …
  2. Locate the serpentine belt on the passenger side of the engine compartment.
  3. Release the tension on the tensioner pulley by putting a 14mm wrench on the bolt and pulling it.
  4. Pull out the serpentine belt once the tension is released.

What happens to a car when the serpentine belt breaks?

If a serpentine belt breaks, a car won’t be drivable and will have to be towed. If the engine runs without a serpentine belt, it might overheat as the water pump will no longer work. A broken belt can also damage other parts.

How much does it cost to replace a drive belt?

But what does a serpentine belt replacement cost? Of course, it depends on your make and model as well as labor costs, but in general a replacement serpentine belt costs around $70-$200 (plus taxes and fees), including around $50 for the belt and around $150 for the labor.

What is a serpentine belt vs timing belt?

The serpentine belt is located on the outside of the engine

It’s a long rubber band stretched out on the side of the car, connecting the engine to key components of your car. For instance, the timing belt spins the alternator, which converts engine power to electricity.

Is fan belt expensive?

The alternator belt replacement cost (also known as serpentine belt, v-belt, drive belt or fan belt) are made up of material costs (approx. £20 – £30) and labour costs (approx. £60 – £200). For most vehicles, costs of around £80 – £230 can be expected.

Will serpentine belt make noise?

Worn/Cracked Serpentine Belt – Serpentine belts have grooves which fit into grooves in the pulleys. Over time, the friction wears down these grooves, resulting in a loose fit. A worn belt can, therefore, begin to slip, which is one of the causes the squeal.

How much does it cost to replace a pulley and serpentine belt?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146. Taxes and fees are not included in the estimate.

Can you drive with a cracked serpentine belt?

There are a couple of factors influencing the answer to this question, but on average, your car should be able to run between 20-90 minutes with a broken serpentine belt. The engine will overheat faster without a functioning cooling system on a hot day, so your driving window is less.

Can a car drive without serpentine belt?

Most vehicles do not use a serpentine belt to drive the engine’s coolant pump, driving such a vehicle without the serpentine belt is possible, but not advised. If however, your vehicle’s coolant pump is driven by the serpentine belt, driving without the belt will overheat and damage the engine.

How can you tell if your serpentine belt is bad?

Bad Serpentine Belts Give Off Signs

Look for fraying, notches, missing chunks, too much slack on the belt, and misalignment on the pulleys. Other visual signs of serpentine belt issues include: Cracking. Abrasions.

Can you change the serpentine belt yourself?

Replacing the serpentine belt is as simple as threading it into position, cranking the tensioner and slipping the belt over the tensioner pulley, or nearest pulley up top. Belt tensioners are mostly spring tension.