Skip to content

Does a 2010 toyota camry have shocks or struts?

You may also notice fluid leaking from your strut. If this is the case for your 2010 Toyota Camry, have a Toyota certified technician diagnose and repair your suspension system with factory genuine parts.

Does a Toyota Camry have shocks or struts?

The Toyota Camry is a comfortable sedan that handles well. To maintain the comfort and the handling, you have to do periodic maintenance on the suspension system, particularly the shocks and struts.

How do I know if it’s my shocks or struts?

Both shocks and suspensions will be located near the tires. Shocks will be vertical and resemble a pneumatic pump. Struts are horizontal and look to be just extensions of the wheels.

How much are struts for a 2010 Toyota Camry?

Essential 2010 Toyota Camry Shocks &amp, Struts Products

Part Name Part ID Price
MOOG – Strut Mount Part No. K90658 from $60.99
MTC – Strut Bearing Part No. L3035169712MTC from $33.17
KYB – Excel-G Strut Assembly Part No. L3000393825KYB from $133.00

Does my car need shocks or struts?

If your driving frequently is over bumpy, rough roads that put more stress on the shock absorbers and front struts, then you will probably need to new shocks and struts for your vehicle more often than if you drive mainly on smooth pavement. Carrying heavy loads also will wear out shocks faster.

How much does it cost to replace struts on a Toyota Camry?

The Best in Auto Repair

The average cost for a Toyota Camry suspension shock or strut replacement is between $567 and $629. Labor costs are estimated between $237 and $300 while parts are priced at $329. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How long do struts last on a Toyota Camry?

Struts may need to be replaced anywhere between 50,000 and 100,000 miles. If the struts start leaking, or become broken or damaged, they should be replaced immediately.

Do car’s have both shocks and struts?

They’re not. Every wheel on your vehicle has either a shock or a strut – never both, never neither. However, you may have struts on your front wheels and shocks on your rear wheels.

Are struts in the front or back?

Struts are typically installed in conjunction with the front wheels, but depending on a vehicle’s setup and driveline, they can also be mounted at the rear wheels. Just as there are different types of cars, there are different types of struts.

What are the signs of a bad strut?

Signs of Bad Struts

  • Clunking Noises When Hitting a Bump. …
  • Bumpy Ride. …
  • Hovering Front End. …
  • Irregular Tire Wear. …
  • Noticeable Vibrations While Driving. …
  • Erratic Braking. …
  • Fluid Leakage. …
  • Irregular Tire Wear.

How do you change the rear struts on a 2007 Toyota Camry?

Signs of Bad Struts

  • Clunking Noises When Hitting a Bump. …
  • Bumpy Ride. …
  • Hovering Front End. …
  • Irregular Tire Wear. …
  • Noticeable Vibrations While Driving. …
  • Erratic Braking. …
  • Fluid Leakage. …
  • Irregular Tire Wear.

How do you change the front struts on a 2007 Toyota Camry?

Here’s how to replace your Toyota Camry’s struts.

  1. Step 1 – Raise and support the car. …
  2. Step 2 – Remove the front struts. …
  3. Step 3 – Install the new front struts. …
  4. Step 4 – Access and remove the rear struts. …
  5. Step 5 – Install the new rear struts.

What happens if you don’t replace struts?

Reduced braking efficiency – Worn shocks and struts can have an adverse effect on the performance of your brakes. Your vehicle’s stopping distance may increase, which can be critical in an emergency braking situation. You’re also at increased risk of skidding on wet roads.

How long do Toyota shocks last?

So how long do shocks and struts last? On average shocks and struts can last 5-10 years or 50,000-100,000 miles under ideal driving conditions. Many factors can affect the lifespan of these components to include: manufacturer, bad roads, heavy loads, towing, hard braking and aggressive driving.

Do you need an alignment after replacing struts?

However, your vehicle does have adjustable camber settings and so, yes, the vehicle would have to be aligned if the struts were replaced. Once new struts are installed, if the alignment is roughly within spec., you can wait until you get your new tires to perform the alignment.

How much are Toyota struts?

On average, replacing the struts in your Toyota Camry will cost between $600 and $700. The total cost can be broken into the following categories: Parts: When you replace your struts, you’ll likely need to replace additional parts like the strut mount, spring insulator, strut bellow, and strut bumper.

Are struts easy to replace?

The good news is, some repairs are easy to do at home. Like replacing shocks and struts. It’s not a job that you should attempt if you’re not familiar working with vehicles, but with a little training and experience, you’ll be ready to tackle the job.

How long does it take to replace struts in a car?

Typically, it takes around one to two hours to change struts, according to most professional mechanics. Even if you decide to replace them on your own, the estimated time is the same as long as you have previous mechanical skills and follow the process correctly.

How much does it cost to replace car struts?

It usually costs between $150 to $450 per strut, depending on your make and model. Usually, both struts need to be replaced at the same time. Your cost for replacing a pair of struts will be between $300 and $900. Strut replacement can take several hours.

How much should I pay for shocks and struts?

A typical shock and strut replacement can set you back anywhere between $450 and $1,100 on parts and labor combined. An individual shock and strut assembly costs around $150 to $900, while estimated labor costs for replacing a shock and strut assembly can range anywhere from $150 to $300 per assembly.

Does a 2010 Mazda 3 have shocks or struts?

2010 Mazda 3 Shocks and Struts – from $36.99+ | AutoZone.com.

How do you check struts on a car?

Performing a road test is the only way to test shocks and struts

  1. Start by checking tire pressure and tire condition. …
  2. Check the condition of steering components. …
  3. Check the condition of the suspension components line control arm bushings, sway bar bushings and sway bar end links.