Skip to content

Where is the transmission range sensor in a 2013 nissan versa?

Where is the transmission range sensor located?

The transmission range sensor may also be called the neutral safety switch or PRNDL input. Located outside the transmission box or on the valve body, its job is to communicate the current gear selection or shift lever position with the TCM or PCM.

How do I fix code P0705?

What repairs can fix the P0705 code?

  1. Repairing an open or short in the TRS circuit.
  2. Replacing a faulty TCM.
  3. Replacing a faulty ECM.
  4. Changing the transmission fluid and filter.
  5. Adjusting the linkage connecting the shift lever on the transmission to the gear shifter inside the car.

What is a transmission range sensor?

Transmission range sensors record the transmission speed. This information is required by the control unit to regulate the shifting pressure when shifting gears and to decide which gear needs to be engaged at which point. There are two types of transmission range sensor design: Hall generators and inductive sensors.

Do 2013 Nissan Versa have transmission problems?

Such problems aren’t hard to spot. 2013 Nissan Versa transmission problems can show up as shifting delays, grinding when accelerating, the car shaking at any speed, or a burning smell or whistling sounds coming from under the hood.

How do I know if my transmission range sensor is bad?

The Transmission Range Sensor tells the PCM the position of the transmission shifter.

Symptoms of a bad transmission range sensor:

  1. The car doesn’t start and will not move.
  2. Transmission shifts into an unexpected gear.
  3. The vehicle will go into limp mode.

How much does it cost to replace a transmission range sensor?

The Best in Auto Repair

The average cost for transmission position sensor replacement is between $251 and $301. Labor costs are estimated between $138 and $174 while parts are priced between $113 and $128. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

Is transmission range sensor and neutral safety switch the same?

The neutral safety switch often has the backup lamp incorporated in its design. The Transmission Range Sensor is part of the transmission computer control system found on late-model vehicles. It can be analog or digital. Both of these are diagnosed with a scan tool.

Can I drive with a P0705 code?

What Does Code P0705 Mean? Issue Severity: MODERATE – Extended driving with this code may cause internal engine damage. Repair Urgency: Get this code fixed as soon as possible. Diagnosis: This trouble code severely impacts the drivability of your vehicle.

What can cause a P0705 code?

Links To Diagnostic Codes

Trouble Code Description
P0702 Transmission Control System Electrical
P0703 Torque Converter/Brake Switch B Circuit
P0704 Clutch Switch In put Circuit Malfunction
P0705 Transmission Range Sensor Circuit Malfunction (PRNDL Input)

Can MAF sensor cause transmission problems?

The Mass Airflow Sensor measures airflow into the engine intake assembly and is used to determine engine load. If it fails it can cause automatic transmission problems such as late harsh shifts, early soft shifts, or can result in no shifting at all.

Is there a recall on 2013 Nissan Versa transmission?

When issues are found once a car has already been sold, automakers may choose to issue a recall. Are there any 2013 Nissan Versa transmission recalls? As of August 2020, there are none.

How much does it cost to replace a transmission on a 2013 Nissan Versa?

The cost of a new 2013 Nissan Versa transmission could be over $3,500 depending on the vehicle, however, transmission services such as fluid changes and a transmission fluid flush are considerably less expensive, in some cases costing less than $150.

Are there any recalls on a 2013 Nissan Versa?

Owners may contact Nissan customer service at 1-800-647-7261. Summary: Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2015 Nissan Versa sedan vehicles manufactured June 9, 2011, to March 11, 2015, and 2014-2015 Nissan Versa Note vehicles manufactured April 23, 2013, to March 11, 2015.

How long does it take to replace a transmission sensor?

Three to four days. It usually takes three to four days to replace or repair the entire transmission system.

How do you change a transmission sensor?

VSS Replacement

  1. 1) Loosen and remove negative battery cable.
  2. 2) Locate the faulty speed sensor and disconnect the speed sensor connector.
  3. 4) Check the connector wiring to insure there are no breaks or exposed wire. …
  4. 5) Verify O-ring is installed on new sensor.
  5. 6) Install and tighten new sensor.

What does P0706 mean?

P0706 Diagnostic Theory for Shops and Technicians

When the code P0706 is set in the Powertrain Computer, it means that the Powertrain Computer or PCM is not seeing a clear, rational change in the data sent from the Transmission Range Sensor, especially after the vehicle is in motion.

How do you test a transmission range switch?

If there’s a no-start condition, this switch can be tested using a voltage meter. Just back probe the desired wire while someone turns the ignition. Check to see if battery voltage is present at the wires leading to the rest of the starter circuit in the Park and Neutral positions.

Where is the neutral safety switch located?

The neutral safety switch is located in the linkage or inside the transmission case which allows the vehicle to shift gear.