Skip to content

How much is a tension pulley for a 2005 nissan altima?

2005 Nissan Altima Idler Pulley – Idler Pulley Replacement – from $31.49+ | AutoZone.com.

How much is it to replace tensioner pulley?

It will cost between $125 and $380 to have your pulley replaced. The labor should cost between $45 and $155 and the parts should cost between $85 and $225.

How much is a tensioner for a Nissan Altima?

The Best in Auto Repair

The average cost for a Nissan Altima drive belt tensioner replacement is between $188 and $223. Labor costs are estimated between $101 and $128 while parts are priced between $86 and $95.

Can you drive with a broken tensioner pulley?

Driving with a bad belt tensioner is unsafe since the tensioner is meant to guarantee ample tension that powers accessories. Wear on the belt tensioner will eventually cause the belt to slip, generate loud noise, and also create an unsafe level of heat along the accessory pulleys.

What happens when a tension pulley goes out?

If the tensioner is loose the belts may squeak or squeal, especially when the engine is first started. It is also possible for the tensioner pulley or bearing to wear out, in which case the vehicle will produce a grinding noise from the pulley.

How long does it take to replace a tensioner pulley?

If you are doing the job at home, give yourself about four hours to change all the parts. You will need the following tools and parts: Replacement idler pulley. Tensioner pulley.

How much does it cost to fix a pulley on a car?

The average cost for drive belt idler pulley replacement is between $132 and $157. Labor costs are estimated between $63 and $80 while parts are priced between $69 and $77. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

How much does it cost to replace a serpentine belt on a Nissan Altima?

The average cost for a Nissan Altima serpentine belt replacement is between $77 and $98. Labor costs are estimated between $37 and $46 while parts are priced between $40 and $51. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How much is it to replace a serpentine belt on a Nissan Altima?

The real cost is in the labor, because a lot of parts need to be disassembled to get to the belt. Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor).

When should the timing belt be changed on a Nissan Altima?

Although timing belts are critical, there’s no need to replace them regularly –unless explicitly recommended in your Nissan owner’s manual. Some automakers recommend changing a timing belt between 60,000 and 100,000, others don’t. Many of today’s timing belts can go 100,000 miles or more without needing to be replaced.

How do you know if a pulley is bad?

With that being said, here are a few of the most common symptoms you can use to determine the condition of your timing belt pulleys.

  1. Shaky, or Otherwise Incumbered Belt Motion. …
  2. Visible Wear On Your Pulleys. …
  3. Belt “Squealing” or “Whining” Noises. …
  4. Knocking or Slapping Noises. …
  5. Damaged Bearings or Pulleys.

What causes tensioner to fail?

A seized tensioner cannot maintain proper belt tension. Dirt or mud can also jam the tensioner housing. A loose or worn pivot arm can allow unwanted movement, that results in belt noise and misalignment. Over time, this will increase belt wear and lead to premature belt failure.

How do you know when to replace a belt tensioner?

Appearance: Cycle the tensioner (mounted on the engine) through the entire range of motion (from stop to stop) by applying torque to the arm with a wrench. The tensioner arm should move smoothly and freely. Solution: If you notice a binding, sticking or grinding tensioner arm, the tensioner should be replaced.

How much does it cost to replace a drive belt tensioner?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146. Taxes and fees are not included in the estimate.

Is a tensioner pulley the same as an idler pulley?

The primary distinction between tensioners and idler pulleys is the presence of an adjustable bolt. Tensioners are positioned on the bolt through mounting. Idler pulleys are not mounted to an adjustable bolt.

Should I replace idler pulley and tensioner?

If there is any wobble, squeak, or undue friction, the idler pulley should be replaced. The best way to maximize the idler pulley’s lifespan is to maintain proper tension on the serpentine belt and replace belts with new ones whenever required.

How much does a pulley cost?

Idler Pulley Replacement Cost

The cost to replace the idler pulley of your driver belt will usually be somewhere between $80 and $200. The cost for the new part should only be anywhere from $40 to $90, while the cost of the labor will be anywhere from $40 to $110.

How much is belt tensioner pulley?

You will pay anything between $125 and $380 for a full idler tensioner pulley replacement cost. The parts can cost as much as $225 and as little as $85. The labor cost should range between $45 and $150.

Can you replace just the pulley on a tensioner?

More often than not, just the pulley goes bad on the tensioner, not the whole tensioner, and for most vehicles, you can purchase and replace the pulley instead of the tensioner itself. The pulley should be replaced if it has a lot of resistance when you spin it.

How do you fix a tensioner pulley?

Turn the pulley bolt counterclockwise with a ratchet and a socket. Remove the bolt, the retaining washer and the pulley. Replace the pulley, washer and bolt and tighten to specified torque illustrated in the repair manual. Replace the tensioner in the engine and replace the bolt.

Can you drive a car with a broken serpentine belt?

Under no circumstances can you drive a vehicle without a serpentine belt because the serpentine belt serves the important function of delivering antifreeze to important parts of the engine. The serpentine belt drives the water pump, and without it, there is insufficient coolant flow to maintain the engine temperature.

What happens if your serpentine belt breaks while driving?

This can lead to a sudden lost of power assist for the steering system, leading to the steering wheel all-of-a-sudden becoming very hard to turn. A broken serpentine belt may stop the water pump from circulating coolant through the cooling system, causing the engine can overheat.

Will a car start with a broken serpentine belt?

Yes, a vehicle can start with a broken serpentine belt, assuming the battery is fully functional. The starter motor and ignition system will crank the car’s engine to get the combustion process started. However, you’ll need the serpentine belt if you want your car running for long periods.

Does a Nissan Altima have a serpentine belt?

For the 2.5L Nissan Altima, the type of serpentine belt system depends on the engine type. For the standard 2.5L, there is one true serpentine belt, a ribbed belt, driving the various accessories, and it has an auto tensioner to make replacement of the belt easy.

How much is a serpentine belt for a 2010 Nissan Altima?

We currently carry 7 Serpentine Belt products to choose from for your 2010 Nissan Altima, and our inventory prices range from as little as $13.79 up to $59.99.

How do you change a serpentine belt on a 2009 Nissan Altima?

We currently carry 7 Serpentine Belt products to choose from for your 2010 Nissan Altima, and our inventory prices range from as little as $13.79 up to $59.99.