Skip to content

How much is a cv axle for a 2010 nissan altima?

2010 Nissan Altima CV Axle – CV Axle Replacement – from $88.99+ | AutoZone.com.

How much is a CV axle for Nissan Altima?

The car’s vehicle identification number (VIN) is the identifying code for a SPECIFIC automobile. The VIN serves as the car’s fingerprint, as no two vehicles in operation have the same VIN. A VIN is composed of 17 characters (digits and capital letters) that act as a unique identifier for the vehicle.

How much does it cost to replace 1 CV axle?

The Best in Auto Repair

The average cost for CV axle replacement is between $941 and $1,070. Labor costs are estimated between $136 and $172 while parts are priced between $805 and $899. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

How much does it cost to replace an axle on a Nissan Altima?

The Best in Auto Repair

The average cost for a Nissan Altima axle shaft seal replacement is between $204 and $254. Labor costs are estimated between $190 and $240 while parts are priced at $14.

Can you drive with a busted CV axle?

If the CV joint gets corrupted or contamination takes place, then the lubricant will leak. A boot seals the CV, and this boot is not resistant to damage. Whenever this happens, the joint will wear out and fail. If you drive a car with a damaged CV, the joint will deteriorate more, making driving impossible.

How much does it cost to fix a Nissan axle?

The Best in Auto Repair

The average cost for a Nissan Frontier axle shaft replacement is between $719 and $755. Labor costs are estimated between $136 and $172 while parts are priced at $583.

How do you test a CV joint?

Take a Test Drive

  1. Put the car in reverse. Then turn the steering wheel all the way to one side and drive backward in a circle. Turn the steering wheel in the other direction and repeat the process.
  2. If you hear a very pronounced clicking or snapping noise, there’s a good chance an outer CV joint is worn out.

How long does it take to replace a CV axle?

Replacing a CV axle is a maintenance item that usually takes between one and a half to three hours to complete, depending on the vehicle and if other repairs are needed. A CV axle typically lasts for 70,000 to 130,000 miles, but the axles should be inspected for damage regularly.

Can you replace CV axle yourself?

You absolutely can replace your CV axle at home, but you’ll need to be at least remotely comfortable using a jack, jack stands, and power tools. Assuming you have most of the equipment already set up in your garage at home, the cost to replace your CV axle will be quite reasonable.

What causes CV axle to break?

Why do CV joints break? The main culprit is shock loading, like when a spinning wheel lifts off the ground and then lands hard, something that can happen fairly often with an independent suspension system because of the usually limited amount of travel.

How do you know if your CV axle is going out?

Below are the four most common symptoms of a bad CV axle, if you notice any of these, head to your local Chevrolet service center immediately.

  1. “Clicking” Noises When Turning.
  2. A Knocking Sound. …
  3. Grease on the Inside or Edge of the Tires. …
  4. Vibration While Driving. …

Do you have to replace both CV axles at the same time?

On a high-mileage vehicle with a bad CV joint or boot, it’s often a good idea to replace both shafts at the same time. Often, the right (passenger side) shaft fails first because right turns are at a sharper angle than left turns, and right turns are more common than left turns.

What happens when a CV joint fails?

If a CV joint begins to fail while driving, your car will start to pull to one side as one wheel loses power. When the joint breaks completely its corresponding wheel will no longer turn and although the engine may still run, the car won’t move.

How much does replacing a CV joint cost?

CV Joint Replacement Cost. A CV joint itself can cost between $95 and $210. Hiring a mechanic to perform a replacement will be between $165 and $800. The price mainly depends on whether you’re replacing a double or single axle.

How does a broken axle sound like?

A Loud Clanking, Clunking, or Clicking

When constant velocity axles fail, you may also hear an unusual clicking sound may when turning the vehicle as joints become loose. These clicks are on the side of the faulty axle shaft and typically become noisier during sharp or fast turns.

How long does it take to replace front axle?

On the 2006 Navigator, if a professional mechanic is replacing the axle(s), it is assumed to take about 1 hour to replace one axle (i.e., one side) whether it is the rear axle or the front axle.

How much does a CV shaft cost?

CV Axle Replacement Expenses

Replacement axle shafts can be bought for between $60-150.00 each, and labor is generally between 1.5-3 hours to replace, bringing labor to around $150-350.00.

How much does an axle cost for a car?

On average, you can expect it to cost between $880 and $959 to replace your car axle shaft, depending on the type of car you drive and which axle is broken. However, it’s possible that you’ll just need to repair your axle rather than replace it.

What does it sound like when your CV joint goes out?

Ans: The most common symptoms of a bad CV joint are the clicking, popping, and clunking sounds it makes when decelerating or accelerating. Vibration when driving is also a common symptom. You might find grease on the car’s underside caused by a torn boot leaky oil.

Is CV joint same as CV axle?

A CV axle has two CV joints (an inner joint and an outer joint). These joints allow the axle to transfer the engine’s power to the drive wheels at a constant speed while accommodating for the different travel conditions, including the up and down motion of the suspension and cornering.

What holds the CV axle into transmission?

Some axles are held to the differential or transmission by roll pins or bolts. If this is the case, simply remove the fasteners and pull the axle out. However, most CV axles are held in by snap rings internal to the transmission or differential.

How long can I drive with a broken CV joint?

It could take weeks, months, or years. But the average lifespan of a bad CV axle is around five to six months. Knowing this does not merely mean to stretch the deadline a little bit. You might be thinking that you can save more money by postponing the checkup for your ATV/UTV.

How many miles do axles last?

They carry the whole weight of the vehicle, plus passengers and cargo. These joints can generally last up to 100,000 miles. However, because CV axles are constantly rotating and flexing to accommodate the condition of the road, they can wear out and fail, resulting in a costly CV joint repair.