Skip to content

What transmission does a 2000 jeep cherokee have?

Available with the 4.0-liter AMC 242 inline-six with the Aisin AW-4 4-speed automatic.

What transmission is in my 2000 Jeep Cherokee?

Windshield wiper blades are vehicle specific. On some vehicles, both wiper blades are the same size. On other vehicles, the two wiper blades are different sizes. The optimal wiper blade size is determined by the manufacturer and selected for proper fit to clear as much of the windshield as possible.

How do I know what transmission I have in my Jeep Cherokee?

The identification plate is attached to the right side of the transmission case. The 42RE/44RE/46RE is a 4-speed fully automatic transmission with electronic governor. The ID numbers are stamped on the case’s left side just above the oil pan.

What transmission is in a 2000 Jeep Grand Cherokee?

The identification plate is attached to the right side of the transmission case. The 42RE/44RE/46RE is a 4-speed fully automatic transmission with electronic governor. The ID numbers are stamped on the case’s left side just above the oil pan.

Are all XJ transmissions the same?

There were three automatic transmissions used in a Jeep Cherokee XJ. They are versions of the same basic transmission (the original 904), but there are differences: Chrysler 904 TorqueFlite – (3-speed) A popular transmission with most Chrysler vehicles, from a slant six to V8s.

How do I know what transmission I have in my Jeep?

Locate the plate.

  1. Lay on the ground on either side of the Jeep.
  2. Slide under the Jeep to the transmission which is bolted to the motor. Look for a metal plate attached to the transmission. The transmission number is located on the plate. It is the only number on the plate. EX. 42RE.

What kind of transmission do I have?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

What transmission is in my 2001 Jeep Cherokee?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

What jeeps have 42RE transmission?

How Do I Order?

  • 1989-2003 Dodge Dakota.
  • 1998-2000 Dodge Durango.
  • 1989-2001 Dodge Ram pickup 150 / 1500.
  • 1989-2003 Dodge Ram Van B150 / B250.
  • 1993-2004 Jeep Grand Cherokee.
  • 1996-1998 Jeep Grand Cherokee 5.2 V8.

What transmission is in my 2001 Jeep Grand Cherokee?

How Do I Order?

  • 1989-2003 Dodge Dakota.
  • 1998-2000 Dodge Durango.
  • 1989-2001 Dodge Ram pickup 150 / 1500.
  • 1989-2003 Dodge Ram Van B150 / B250.
  • 1993-2004 Jeep Grand Cherokee.
  • 1996-1998 Jeep Grand Cherokee 5.2 V8.

How good is the Jeep 4.7 engine?

The Jeep 4.7 engine has been providing satisfactory performance for several years. It’s a reliable, powerful, and decent power unit. However, similar to all other engines, it also comes with a fair share of complications and flaws.

What vehicles have the 42RE transmission?

The 42RE was used in Dodge and Jeep applications from 1982 through 2004. 42RE is the first of its series to feature an electronically controlled overdrive. The A500 42RE was specifically designed for Dodge Ram, Dakota, Durango and Jeep Grand Cherokee vehicles with 3.9 and 4.0 liter engines.

What transmission is in a 1999 Jeep Cherokee?

The 42RE was used in Dodge and Jeep applications from 1982 through 2004. 42RE is the first of its series to feature an electronically controlled overdrive. The A500 42RE was specifically designed for Dodge Ram, Dakota, Durango and Jeep Grand Cherokee vehicles with 3.9 and 4.0 liter engines.

How do I know if I have a AW4 transmission?

Identification. The AW4 as found in Jeep vehicles has a length of 25-3/8″. The AW4 has a removable bellhousing with a port for the crank position sensor. The case is smaller in diameter than most automatics, and features cast-in ribbing down the rear half of the case.

What transmission is in a Jeep Cherokee XJ?

Identification. The AW4 as found in Jeep vehicles has a length of 25-3/8″. The AW4 has a removable bellhousing with a port for the crank position sensor. The case is smaller in diameter than most automatics, and features cast-in ribbing down the rear half of the case.

Does Jeep Cherokee have manual transmission?

Now, the Jeep Wrangler and the Jeep Gladiator are both current models. Say you want a Grand Cherokee with a manual transmission. If that’s the case, then you’re going to have to buy a used Jeep. Fortunately, there are plenty of used Jeep models out there, many of which come outfitted with a stick-shift.

Does VIN number tell your transmission?

Unfortunately, this is not required by the NHTSA VIN standard. Some OEMs still use the same 10-digit VIN patterns for automatic and manual transmission vehicles, meaning that VIN alone will not be enough to determine the vehicle’s transmission type.

What transmission is in my 2000 Jeep Wrangler?

Unfortunately, this is not required by the NHTSA VIN standard. Some OEMs still use the same 10-digit VIN patterns for automatic and manual transmission vehicles, meaning that VIN alone will not be enough to determine the vehicle’s transmission type.

How do I know if my Jeep has a CVT transmission?

Discovering if your car has a CVT can be difficult by just looking at the shift lever, and pedal arrangement may be identical to an automatic transmission. A few keys to look for would be a lack of shift points while driving and the type of transmission fluid that is recommended for your car.

What is the difference between a 4L60 and a 4L60E transmission?

The rear output housing is configured with a six-bolt pattern in late model 4L60E transmissions. The 4L60 transmission is configured with a four-bolt pattern. The bolt pattern is not a guaranteed distinction, however, as early 4L60E transmissions, manufactured from 1992 through 1997, also have a four-bolt pattern.

What type of transmission do I have by Vin?

Simply write the VIN number down and you can then ask a dealership service department, auto repair shop, or auto parts retailer to help you identify the transmission. They’ll easily be able to find the specs by plugging the VIN number into the computer.

What transmission does a 5.3 Vortec have?

In all applications, the engine is matched with GM’s Hydra-Matic 6L80 six-speed automatic transmission. The 5.3L’s balance of performance and efficiency is great airflow throughout.

How do I identify a Jeep TJ transmission?

The transmission in a Jeep is identified by an identification plate. This plate is stamped on the housing of the transmission and the location can vary, depending on the model year of your Jeep. The numbers on the identification plate provide the build date, part number and the build date.

How much is a transmission for a Jeep Cherokee?

2020 Jeep Cherokee Transmission Cost

The cost of a new 2020 Jeep Cherokee transmission could be over $3,500 depending on the vehicle, however, transmission services such as fluid changes and a transmission fluid flush are considerably less expensive, in some cases costing less than $150.

How do I know if I have a NV3550 transmission?

Identification. The NV3550 is 16.7″ long and has a cast aluminum case with generous ribbing. With its removable Jeep I6 bellhousing, it measures 23.1″. The front bolt pattern is oval shaped and has dowel pins for precision centering alignment to the bellhousing.

What is the difference between 42RE and 42RLE?

did the 42 RE also fit wranglers? 42RLE: Four-speed automatic transmission was available from 2003 to 2006 Jeep TJ Wrangler with 4.0L engines. 42RE: The 42RE four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.

What does 42RE mean?

The 42RH was a medium-duty transmission, while the 42RE was a heavy-duty version of the same transmission. They featured identical gear ratios, but the 42RE used electronic components to shift gears. The 42RH used a mechanical hydraulic system.

What is a 46RE transmission?

The 46RE transmission is known for being durable and reliable which is why it was in production for so long. Commonly found in trucks and vans, the electronic-controlled governor pressure and impressive gear ratios allowed vehicles to shift gears smoothly.