Skip to content

What kind of battery does a 2003 jeep liberty take?

What battery does a 2003 Jeep Liberty use?

Battery Size &amp, Replacement for 2003 Jeep Liberty

Battery Engine Cold Cranking Amps
34FT-2 L4/2.4L 800
34-AGM L4/2.4L 740
34FT-2 V6/3.7L 800
34-AGM V6/3.7L 740

What size is a Jeep Liberty battery?

DieHard Silver – Battery, Group Size 34, 660 CCA (Part No. 34-1)

How much does a Jeep Liberty battery cost?

The average cost for a Jeep Liberty battery replacement is between $206 and $213. Labor costs are estimated between $26 and $33 while parts are priced at $180.

How do I know what type of battery my car needs?

In order to find the right battery for your car, you’ll need to know the group size. Step 1: Check for the group size on your old battery. If the battery that originally came with your car is still in it, look for the group size on a label on the battery. The label may be on the top or on the side of the case.

How do you change the battery in a 2004 Jeep Liberty?

In order to find the right battery for your car, you’ll need to know the group size. Step 1: Check for the group size on your old battery. If the battery that originally came with your car is still in it, look for the group size on a label on the battery. The label may be on the top or on the side of the case.

What battery does a 2004 Jeep Liberty take?

2004 Jeep Liberty Battery Replacement &amp, Size

Battery Engine
34FT-2 L4/2.4L Performance months
34-AGM L4/2.4L Performance months
34FT-2 V6/3.7L Performance months
34-AGM V6/3.7L Performance months

What battery does a 2005 Jeep Liberty take?

The Right Battery Size for a 2005 Jeep Liberty

Battery Engine Cold Cranking Amps
34-AGM L4/2.4L 740
34FT-2 L4/2.8L 800
34FT-2 V6/3.7L 800
34-AGM V6/3.7L 740

What battery does a 2012 Jeep Liberty take?

2012 Jeep Liberty Battery Replacement &amp, Size

Battery Engine
34FT-2 V6/3.7L Performance months
34-AGM V6/3.7L Performance months

Can I use a battery with higher cranking amps?

It is widely believed that the higher the CCA rating, the better the battery will be for your car. It is still possible to use them in your car, but they may not fit in the battery tray. Batteries with a higher CCA can be more reliable and last longer in general.

How do I know if my battery is AGM?

And then the labels of the AGM lead-acid batteries should state “AGM” or, in full words, “Absorbed Glass Mat,” or terms such as: “dry cell,” or “sealed regulated valve,” or “non-spill,” or “regulated valve” on the label. However, telling an AGM apart from a gel cell is difficult if there is no labeling.

How many cold cranking amps do I need?

A battery should be big enough to allow reliable cold starting. The standard recommendation is a battery with at least one Cold Cranking Amp (CCA) for every cubic inch of engine displacement (two for diesels).

How do you change the battery in a 2003 Jeep Liberty?

A battery should be big enough to allow reliable cold starting. The standard recommendation is a battery with at least one Cold Cranking Amp (CCA) for every cubic inch of engine displacement (two for diesels).

How do you take a battery out of a Jeep Liberty?

Remove the Battery

  1. Open the hood to access the engine compartment. …
  2. Remove the cap over the positive battery terminal. …
  3. Loosen the terminal by turning the nut counterclockwise with a small wrench or crescent wrench. …
  4. Repeat the same procedure for the negative terminal. …
  5. Locate the bolt at the rear bottom of the battery.

How do you take a battery out of a Jeep?

Remove the Battery

  1. Open the hood to access the engine compartment. …
  2. Remove the cap over the positive battery terminal. …
  3. Loosen the terminal by turning the nut counterclockwise with a small wrench or crescent wrench. …
  4. Repeat the same procedure for the negative terminal. …
  5. Locate the bolt at the rear bottom of the battery.

How do you change the battery in a 2012 Jeep Liberty?

How To Replace Dead Battery 2002-12 Jeep Liberty

  1. Disconnect the negative battery cable with a 10mm socket.
  2. Disconnect the positive battery cable with a 10mm socket.
  3. Remove the 10mm battery mounting bolt.
  4. Remove the battery mount.
  5. Pull out the battery.