Skip to content

How much is a starter for a 2012 jeep liberty?

We currently carry 5 Starter products to choose from for your 2012 Jeep Liberty, and our inventory prices range from as little as $130.94 up to $274.99.

How much does it cost to replace a starter on a Jeep Liberty?

The average cost for a Jeep Liberty starter replacement is between $310 and $417. Labor costs are estimated between $88 and $111 while parts are priced between $222 and $306. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How do you check the starter on a Jeep Liberty?

The starter is located on the driver’s side of the engine midway between the oil pan and the intake manifold bolted to the bellhousing.

  1. Lift the hood and check the battery terminal connections for cracking, looseness or corrosion. …
  2. Check the battery cable to the starter solenoid.

How much does it cost to replace a starter in a Jeep?

A starter replacement typically costs between $440 and $551. Labor costs can be between $112 and $141, while the parts cost between $307 and $410. Of course, this is exclusive of tax and fees.

What problems does a 2012 Jeep Liberty have?

Top 2012 Jeep Liberty Problems

  • Check Engine Light/Misfire Due to Intake Valve Locks/Valves. …
  • Power Window Motor May Fail Due to Regulator Assembly. …
  • The Sky Slider Sunroof May Not Open. …
  • Engine Will not Start Due to Wireless Control Module Fault. …
  • Front/Rear Differential Pinion Seal/Transfer Case Leaks are Common.

How do I know if my starter is bad on my Jeep?

Still, look for these seven symptoms that your starter is going bad.

  1. #1: Engine Won’t Turn Over. …
  2. #2: Noise – Clicking, Grinding, or Whirring. …
  3. #3: Intermittent Issues Starting the Vehicle. …
  4. #4: Starter Stays On After Starting. …
  5. #5: Smoke. …
  6. #6: Starter Engages But Motor Won’t Start. …
  7. #7: Battery.

What happens when a starter goes out on a car?

When the starter drive gear is worn out or not engaging properly, it will often produce a grinding noise. This is similar to the one that is heard if you start your engine and then accidentally action the ignition switch again. If the grinding symptom is ignored, it may also result in damage to the engine flywheel.

What causes a Jeep Liberty not to start?

The most common reasons a Jeep Liberty won’t start are a dead battery, an alternator problem, or failed starter.

How do you start a Jeep Liberty starter?

The most common reasons a Jeep Liberty won’t start are a dead battery, an alternator problem, or failed starter.

How do you test a starter to see if it’s good?

The starter should spin/crank the engine. If it does, the problem is with the cables, connections or relay. If it doesn’t, crank the engine, connect the black/negative jumper cable as a ground between the drivetrain and negative terminal of the battery. Touch the red cable to the starter’s positive terminal.

Can AutoZone check starter?

Every AutoZone in the USA will check your alternator, starter, or battery at no charge.

How much is a starter?

A new starter may cost between $80 and $350, but you should also factor in labor costs which may cost between $150 to $1,000. For most vehicles, the complete starter replacement cost is around $500.

Can I replace a starter myself?

You can buy a new starter, which is rather expensive, or you can buy a rebuilt starter, which is just as good as a new one [source: Allen]. If the problem is really your starter, save yourself a trip to the mechanic and replace it yourself.

Do Jeep Liberty have a lot of problems?

While some years are unreliable, you’ll be pleased to find that most of these vehicles will run for a long time without too many issues. In fact, the Jeep Liberty ranked 5th out of 10 Jeep models for reliability. Still, the Jeep Liberty is notorious for having problems.

How many miles do Jeep Liberty’s last?

Typically, a Jeep Liberty can last anywhere from 10-15 years or 200,000 to 400,000 miles. Of course, how you drive and maintain your Jeep can have a big impact on how long your vehicle lasts. Here are some tips to keep your Jeep running longer: Have a regular maintenance schedule.

Is a Jeep Liberty a reliable car?

The Jeep Liberty has received average scores on all major reliability ratings. RepairPal rates it a 3.5 out of 5, ranking it 14th out of 26 midsize SUVs. It received higher scores on Cars.com, earning a score of 4.2 out of 5 based on consumer reviews.

Can you jumpstart a car with a bad starter?

If your car has automatic transmission, you can jump-start your car and can also check for other reasons to identify a broken starter. However, the push-starting method won’t work with an automatic car as you need manual transmission to push-start your vehicle.

How long can you drive with a bad starter?

Starters can simply stop working one day without warning. In cases where the starter has worn out or is shorted, it may turn over a long way more slowly than usual. It is possible for some cars to grind or crash through out the night if their starter motor is not working properly.

What does a faulty starter sound like?

A bad starter’s tell-tale noise is loud clicking. It can either have a fast tempo, click-click-click-click-click-click-click-click or a slower lilt of click, click, click, click. No other part makes these noises when they fail, so if you hear either, you’re likely going to be on the hook for a brand-new starter.

Is it my starter or alternator?

If you hear a whine or the sound goes fuzzy when you hit the gas, your alternator is probably failing. If the vehicle won’t crank or start but the headlights are still working, look to problems with the starter or other parts of the engine.

How do I know if my starter is going bad?

We’re going to explain the biggest red flags that your starter is going bad below.

  1. Nine Signs of a Failing Starter. …
  2. Your Vehicle Labors to Crank or Cranks Slowly. …
  3. Your Vehicle Refuses to Start. …
  4. Your Car Starts Intermittently. …
  5. The Interior Lights Dim When You Attempt to Start Your Car.

How do you tell if its your starter or your battery?

Last, Check The Starter

The battery sends a burst of energy to the start which uses this energy to turn the engine over and get it car started. If you put the key in the ignition, but only hear a click when you turn the key, you’ve got a problem with your starter.

Why won’t my jeep start when I turn the key?

Basically, with a fully charged battery, and with the key held in the “start” position, the starter is either getting power or it isn’t. With the key in the “start” position, if the starter motor is getting power but the starter doesn’t work, then the starter is condemned and replaced.

Why is my Jeep Liberty sputtering?

Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

How do you reset the security system on a Jeep Liberty?

The Jeep Liberty’s anti-theft system can be reset by pulling the driver’s handle and using the chipped key to crack the driver’s door. Alternatively, you can use the panic lever to disable the alarm by depressing it. A panic button may be used with this method if you have depressed the lock command 2 times.

How do you change a starter on a 2011 Jeep Liberty?

The Jeep Liberty’s anti-theft system can be reset by pulling the driver’s handle and using the chipped key to crack the driver’s door. Alternatively, you can use the panic lever to disable the alarm by depressing it. A panic button may be used with this method if you have depressed the lock command 2 times.

How much is an alternator for a 2008 Jeep Liberty?

The average cost for a Jeep Liberty alternator replacement is between $411 and $551. Labor costs are estimated between $53 and $67 while parts are priced between $358 and $485.

Where is the starter on a Jeep Liberty 2007?

The average cost for a Jeep Liberty alternator replacement is between $411 and $551. Labor costs are estimated between $53 and $67 while parts are priced between $358 and $485.