Skip to content

How much is a starter for a 2010 jeep liberty?

2010 Jeep Liberty Starter – from $169.99+ | AutoZone.com.

How much does it cost to replace a starter on a Jeep Liberty?

The average cost for a Jeep Liberty starter replacement is between $310 and $417. Labor costs are estimated between $88 and $111 while parts are priced between $222 and $306. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How much does it cost to replace a starter in a Jeep?

A starter replacement typically costs between $440 and $551. Labor costs can be between $112 and $141, while the parts cost between $307 and $410. Of course, this is exclusive of tax and fees.

Why is my Jeep Liberty not starting?

The most common reasons a Jeep Liberty won’t start are a dead battery, an alternator problem, or failed starter.

Where is the starter on a Jeep Liberty?

The starter is located on the driver’s side of the engine midway between the oil pan and the intake manifold bolted to the bellhousing.

  1. Lift the hood and check the battery terminal connections for cracking, looseness or corrosion. …
  2. Check the battery cable to the starter solenoid.

How do I know if my starter is bad on my Jeep?

Still, look for these seven symptoms that your starter is going bad.

  1. #1: Engine Won’t Turn Over. …
  2. #2: Noise – Clicking, Grinding, or Whirring. …
  3. #3: Intermittent Issues Starting the Vehicle. …
  4. #4: Starter Stays On After Starting. …
  5. #5: Smoke. …
  6. #6: Starter Engages But Motor Won’t Start. …
  7. #7: Battery.

What happens when a starter goes out on a car?

When the starter drive gear is worn out or not engaging properly, it will often produce a grinding noise. This is similar to the one that is heard if you start your engine and then accidentally action the ignition switch again. If the grinding symptom is ignored, it may also result in damage to the engine flywheel.

Can AutoZone check starter?

Every AutoZone in the USA will check your alternator, starter, or battery at no charge.

Can I replace a starter myself?

You can buy a new starter, which is rather expensive, or you can buy a rebuilt starter, which is just as good as a new one [source: Allen]. If the problem is really your starter, save yourself a trip to the mechanic and replace it yourself.

How much is a starter?

A new starter may cost between $80 and $350, but you should also factor in labor costs which may cost between $150 to $1,000. For most vehicles, the complete starter replacement cost is around $500.

Why won’t my jeep start when I turn the key?

Basically, with a fully charged battery, and with the key held in the “start” position, the starter is either getting power or it isn’t. With the key in the “start” position, if the starter motor is getting power but the starter doesn’t work, then the starter is condemned and replaced.

What is a PCM on a Jeep Liberty?

The Powertrain Control Module (PCM) is the computer that controls most of your Jeep’s essential systems. The PCM controls the engine timing, the fuel to air ratio, the transmission, and the anti-lock brakes, along with dozens of other smaller functions.

Why is my Jeep Liberty sputtering?

Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.

How do you test a starter to see if it’s good?

The starter should spin/crank the engine. If it does, the problem is with the cables, connections or relay. If it doesn’t, crank the engine, connect the black/negative jumper cable as a ground between the drivetrain and negative terminal of the battery. Touch the red cable to the starter’s positive terminal.

How do you start a Jeep Liberty starter?

The starter should spin/crank the engine. If it does, the problem is with the cables, connections or relay. If it doesn’t, crank the engine, connect the black/negative jumper cable as a ground between the drivetrain and negative terminal of the battery. Touch the red cable to the starter’s positive terminal.

Where is the starter located on a Jeep?

The starter is at the bottom of the motor toward the rear ahead of the transmission. Unbolt the positive wire from the solenoid on top of the starter. The ground is bolted in with the bottom bolt, so it will be removed when you undo the bottom bolt. Take the bottom bolt out with a socket wrench.

Can you jumpstart a car with a bad starter?

If your car has automatic transmission, you can jump-start your car and can also check for other reasons to identify a broken starter. However, the push-starting method won’t work with an automatic car as you need manual transmission to push-start your vehicle.

How long can you drive with a bad starter?

Starters can simply stop working one day without warning. In cases where the starter has worn out or is shorted, it may turn over a long way more slowly than usual. It is possible for some cars to grind or crash through out the night if their starter motor is not working properly.

What does a faulty starter sound like?

A bad starter’s tell-tale noise is loud clicking. It can either have a fast tempo, click-click-click-click-click-click-click-click or a slower lilt of click, click, click, click. No other part makes these noises when they fail, so if you hear either, you’re likely going to be on the hook for a brand-new starter.

Is it my starter or alternator?

If you hear a whine or the sound goes fuzzy when you hit the gas, your alternator is probably failing. If the vehicle won’t crank or start but the headlights are still working, look to problems with the starter or other parts of the engine.

How do you tell if its your starter or your battery?

Last, Check The Starter

The battery sends a burst of energy to the start which uses this energy to turn the engine over and get it car started. If you put the key in the ignition, but only hear a click when you turn the key, you’ve got a problem with your starter.

How do u know if your starter went out?

We’re going to explain the biggest red flags that your starter is going bad below.

  1. Nine Signs of a Failing Starter. …
  2. Your Vehicle Labors to Crank or Cranks Slowly. …
  3. Your Vehicle Refuses to Start. …
  4. Your Car Starts Intermittently. …
  5. The Interior Lights Dim When You Attempt to Start Your Car.

Can O’Reilly test a starter?

Free Start &amp, Alternator Testing

O’Reilly Auto Parts can test starters and know how to test alternators and can provide quick and free information to help you determine the health of your starting and charging system.

Is my alternator bad?

Signs Your Alternator is Failing

Another sign is if your headlights are dimmer than normal or are flickering. Other electrical issues, such as the power locks, dashboard lights, car radio, and power windows not operating correctly are also signs of a bad alternator.

Can AutoZone change my battery?

AutoZone will install a battery for free as long as you purchase that battery from them. They will remove your old battery and take it in place of charging you a core fee. They will install the new battery and ensure your car starts easily and runs properly with the battery installed.

Is replacing a starter expensive?

A brand new starter could cost you around $50 – $350, while labor costs from a qualified mechanic could range between $150 – $1,100. In total, replacing a bad starter motor could amount to between $200 – $1450.

How long does it take to change starter?

Due to the complexity of starter motors, the average amount of time it takes to completely replace a starter is generally between 2 and 4 hours. If your car has an easily accessible starter and you take it to a mechanic worth their salt, your time should hopefully be closer to 2 hours rather than 4.

How long does it take to replace a starter motor?

How long does it take to replace a starter motor? You can expect its replacement to take between 2 and 4 hours. Not all starter motors are easy to get to, which can add time to the process and further cost to your final bill.