Skip to content

How much is a starter for a 2007 jeep liberty?

We currently carry 9 Starter products to choose from for your 2007 Jeep Liberty, and our inventory prices range from as little as $114.39 up to $289.99.

How much does it cost to replace a starter on a Jeep Liberty?

The average cost for a Jeep Liberty starter replacement is between $310 and $417. Labor costs are estimated between $88 and $111 while parts are priced between $222 and $306. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

What would make a 2007 Jeep Liberty not start?

The most common reasons a Jeep Liberty won’t start are a dead battery, an alternator problem, or failed starter.

How much does it cost to replace a starter in a Jeep?

A starter replacement typically costs between $440 and $551. Labor costs can be between $112 and $141, while the parts cost between $307 and $410. Of course, this is exclusive of tax and fees.

How much is a starter problem?

A brand new starter could cost you around $50 – $350, while labor costs from a qualified mechanic could range between $150 – $1,100. In total, replacing a bad starter motor could amount to between $200 – $1450. However, these figures could be lower if you’re able to identify car starter issues early.

How do I know if my starter is bad on my Jeep?

Still, look for these seven symptoms that your starter is going bad.

  1. #1: Engine Won’t Turn Over. …
  2. #2: Noise – Clicking, Grinding, or Whirring. …
  3. #3: Intermittent Issues Starting the Vehicle. …
  4. #4: Starter Stays On After Starting. …
  5. #5: Smoke. …
  6. #6: Starter Engages But Motor Won’t Start. …
  7. #7: Battery.

What happens when a starter goes out on a car?

When the starter drive gear is worn out or not engaging properly, it will often produce a grinding noise. This is similar to the one that is heard if you start your engine and then accidentally action the ignition switch again. If the grinding symptom is ignored, it may also result in damage to the engine flywheel.

Why does my Jeep turn over but not start?

Clogged Fuel Filter

One of the most common reasons why a jeep turns over but doesn’t start is because the fuel filter might be clogged and not be able to remove enough fuel from the tank.

Where is the starter relay on a 2007 Jeep Liberty?

2 Answers. In the power distribution box under the hood behind the battery, see diagram.

Where is the starter on a 2007 Jeep Liberty?

The starter is located on the driver’s side of the engine midway between the oil pan and the intake manifold bolted to the bellhousing.

  1. Lift the hood and check the battery terminal connections for cracking, looseness or corrosion. …
  2. Check the battery cable to the starter solenoid.

Can AutoZone check starter?

Every AutoZone in the USA will check your alternator, starter, or battery at no charge.

Can I replace a starter myself?

You can buy a new starter, which is rather expensive, or you can buy a rebuilt starter, which is just as good as a new one [source: Allen]. If the problem is really your starter, save yourself a trip to the mechanic and replace it yourself.

How much is a starter?

A new starter may cost between $80 and $350, but you should also factor in labor costs which may cost between $150 to $1,000. For most vehicles, the complete starter replacement cost is around $500.

How many hours does it take to replace a starter?

Due to the complexity of starter motors, the average amount of time it takes to completely replace a starter is generally between 2 and 4 hours. If your car has an easily accessible starter and you take it to a mechanic worth their salt, your time should hopefully be closer to 2 hours rather than 4.

When should I replace my starter?

On average, a starter motor lasts for 100,000-150,000 miles. In many cars, the starter motor lasts for the lifetime of the vehicle, however in some cars, it can fail prematurely.

How do you tell if it’s your starter or ignition switch?

Test the Starter

It is under the hood, usually on the passenger side at the bottom of the motor next to the transmission. The ignition switch is a set of electrical contacts that activates the starter and usually is located on the steering column.

Can you jumpstart a car with a bad starter?

If your car has automatic transmission, you can jump-start your car and can also check for other reasons to identify a broken starter. However, the push-starting method won’t work with an automatic car as you need manual transmission to push-start your vehicle.

How long can you drive with a bad starter?

Starters can simply stop working one day without warning. In cases where the starter has worn out or is shorted, it may turn over a long way more slowly than usual. It is possible for some cars to grind or crash through out the night if their starter motor is not working properly.

What does a faulty starter sound like?

A bad starter’s tell-tale noise is loud clicking. It can either have a fast tempo, click-click-click-click-click-click-click-click or a slower lilt of click, click, click, click. No other part makes these noises when they fail, so if you hear either, you’re likely going to be on the hook for a brand-new starter.

How can I test my starter?

The starter should spin/crank the engine. If it does, the problem is with the cables, connections or relay. If it doesn’t, crank the engine, connect the black/negative jumper cable as a ground between the drivetrain and negative terminal of the battery. Touch the red cable to the starter’s positive terminal.

Why won’t my Jeep start with a new battery?

The first is to check the wiring from the battery to the starter. They should be looking at voltage drop across the starter circuit. They should also be looking at the starter and neutral safety switch. The second issue may be the key fob is weak.

How do I test my Jeep battery?

A voltmeter is a simple tool that can quickly measure your battery charge. With the vehicle turned off, connect the voltmeter’s red test lead to the battery’s positive terminal. The black test lead should then be connected to the negative terminal. Look for a charge that registers 12.4+ or greater.

How do I start my Jeep?

A voltmeter is a simple tool that can quickly measure your battery charge. With the vehicle turned off, connect the voltmeter’s red test lead to the battery’s positive terminal. The black test lead should then be connected to the negative terminal. Look for a charge that registers 12.4+ or greater.