Skip to content

How much is a heater core for a 2002 jeep grand cherokee?

We currently carry 2 Heater Core products to choose from for your 2002 Jeep Grand Cherokee, and our inventory prices range from as little as $69.90 up to $115.99. On top of low prices, Advance Auto Parts offers 2 different trusted brands of Heater Core products for the 2002 Jeep Grand Cherokee.

How much does a heater core cost for a Jeep Cherokee?

The Best in Auto Repair

The average cost for a Jeep Cherokee heater core replacement is between $1,073 and $1,251. Labor costs are estimated between $520 and $656 while parts are priced between $553 and $596.

How expensive is it to replace a heater core?

The average cost for heater core replacement is between $1,031 and $1,304. Labor costs are estimated between $588 and $742 while parts are priced between $443 and $561. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

Why does my Jeep Grand Cherokee have no heat?

The most common reasons a Jeep Grand Cherokee heater isn’t working are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor. Search our network of RepairPal Certified shops near you to speak with a technician about your issue.

Can you replace a heater core yourself?

You’ll need several tools to get this job done, including a jack, jacks stands, a socket set, wrenches, pliers, a drain pan and rags. Besides a new heater core, you’ll also need coolant. You may need heater core hoses and hose clamps. When you find the heater core, raise the front of your vehicle, placing it on jacks.

Can you drive with a blown heater core?

You can still drive on with the condition, however, you should not, for a long time. The heater core uses the engine’s coolant, and a faulty heater core affects the cooling effect which then raises the temperature. Not curing the issue and continue to drive the vehicle this way can lead to further engine damage.

How long does it take to change a heater core?

6-8 hours,2 people,if they know what they are doing!

How can you tell if your heater core is going out?

Five Signs Your Car’s Heater Core Is Going Bad

  • Fog Inside Your Car. Two things could be going on if you have fog inside your car. …
  • Sweet Smells in the Car. The sweet smell in your car might not be your perfume or the donuts you’re taking to work. …
  • Constant Engine Coolant Loss. …
  • Cold Air in the Cabin. …
  • Cold Cabin/Hot Engine.

Why is my Jeep Grand Cherokee blowing cold air?

Your Jeep heater is blowing cold air and you’re not sure why. Two possibilities exist. One is a stuck thermostat. The other possibility is a bad heater core.

Why is my Jeep Cherokee heater blowing cold air?

Low Coolant Level

The coolant (usually a mixture of water and antifreeze) in your engine doesn’t just work to keep the engine from overheating: It’s also the source of heat supporting the heating system. If there isn’t enough coolant in your system, the heater core will blow cold air into your car.

Where is the thermostat on a Jeep Grand Cherokee?

Replacing a thermostat on most any car can be done with little auto repair experience. The thermostat is always in a visible and reachable spot. The Jeep Cherokee is even easier because the thermostat rests at the very top of the motor. The thermostat is a small piece that helps regulate the temperature of a vehicle.

Will Stop leak fix a heater core leak?

Easily Fix Heater Core Leaks with Bar’s Leaks® Liquid Aluminum™ Bar’s Leaks Liquid Aluminum Radiator &amp, Heater Core Stop Leak is an easy solution to fix many heater core leaks.

What causes heater core failure?

How does a heater core go bad? There are multiple reasons a car’s heater core could not be working properly. One reason could be due to clogging, as the coolant could become contaminated if it’s not regularly flushed out. Another reason for a bad heater core could be because of a leak somewhere in the system.

Where is the location of heater core?

A heater core is a small radiator located under the dashboard of the vehicle, and it consists of conductive aluminium or brass tubing with cooling fins to increase surface area. Hot coolant passing through the heater core gives off heat before returning to the engine cooling circuit.

What happens if you don’t fix a heater core?

Driving with a faulty heater core can be risky, as it can lead to overheating and extensive engine damage. Even a clogged heater core can prevent proper coolant circulation, causing your engine to run hot. But if you must continue driving for a short distance, keep an eye on the temperature gauge.

How long does a heater core last in a car?

A: Most heater cores are designed to have very long use-lifes, averaging about 10-15 years. Obviously, if you put strain on your heater core or fail to remedy a fault when it occurs, such as the heat not working as well as it once did, that life will be considerably shortened.

How do you fix a clogged heater core?

Flushing a radiator can help reduce the rust that passes through the heater core. The most effective way of unclogging a heater core is by flushing it with a garden hose.

How much is a heater core flush?

How much does it cost to flush a heater core? A heater core flush service will cost around &amp, $79-$89. Flushing the tubes of the heater core can allow for the coolant to flow more smoothly especially if the heater wasn’t working as well as it usually would.

Are evaporator core and heater core the same thing?

The evaporator is typically hidden inside the vehicle’s dashboard and can be labor-intensive to replace, which then requires a full system recharge. Unlike a ruptured heater core, which can leak engine coolant into the foot wells, a leak in the evaporator releases only refrigerant vapor.

How do you bypass a heater core?

The evaporator is typically hidden inside the vehicle’s dashboard and can be labor-intensive to replace, which then requires a full system recharge. Unlike a ruptured heater core, which can leak engine coolant into the foot wells, a leak in the evaporator releases only refrigerant vapor.

Can you unclog a heater core?

To clean the blockage, you need to flush water or air through the heater core. By doing so, the grime and dirt that’s causing the clog will come out through the inlet hose. Now, insert a water hose into the outlet hose. If you have access to an air compressor, you can use that to push out the coolant and grime.

How do you reset the blend door actuator on a Jeep Grand Cherokee?

Blend Door Actuator Motor Calibration

Move the key to the off position. Open hood (bonnet for the RHD guys) and locate fuse #15 in the fuse box next to the battery. Remove the fuse and wait 1-2 minutes for any capacitive charges in the system to dissipate. Replace the fuse.

Why does my AC only work on one side?

Due to the design of dual AC systems, low refrigerant is the leading cause of drastic temperature difference from one side of the dash to the other. Even well experienced car mechanics may be surprised to learn that as little as 4 to 8 ounces undercharged of 134A can make such a huge difference.