Skip to content

How much is a engine for a 2008 jeep commander?

2008 Jeep Commander Engine – from $2749.99+ | AutoZone.com.

How much does a Jeep Commander engine cost?

The cost of a Jeep Commander’s engine replacement ranges from $2,000 to $6,000.

How long do Jeep Commander engines last?

When a Commander is well maintained, you can expect it to easily go 150,000 to 200,000 miles. Make sure to take it for service a few hundred miles before it’s due and change the oil regularly and you will get a long lifespan from your Commander.

How much does an engine cost for a 2006 Jeep Commander?

2006 Jeep Commander Engine – from $2749.99+ | AutoZone.com.

What engine is in a 2008 Jeep Commander?

2006 Jeep Commander Engine – from $2749.99+ | AutoZone.com.

How much does it cost to replace a Jeep engine?

Typically, it will cost around $1,000 to $10,000 to replace the engine on a Jeep Wrangler. It will need to cover both labor and materials. When it comes to replacing an engine, one’s own cost is low, while more expensive materials have to be purchased from a mechanic.

Are Jeep Commanders expensive to fix?

Cost. The average total annual cost for repairs and maintenance on a Jeep Commander is $639, compared to an average of $784 for fullsize SUVs and $652 for all vehicle models.

Do Jeep Commanders have a lot of problems?

Jeep Commander Reliability Problems

Commander owners have made 255 complaints over 5 model years. Using our PainRank™ system we’ve ranked it 4th in overall reliability out of 9 Jeep models , with real engine and interior concerns.

What problems do Jeep Commanders have?

There have been reports that some 2006-2010 Jeep Commander units with 3.7 V6 and 4.7 V8 engines have been prone to exhaust leaks. Owners describe hearing a ticking noise coming from the exhaust manifold and later discovering damaged exhaust manifold bolts.

What is considered high mileage for a Jeep Commander?

How Many Miles Will A 2010 Jeep Commander Last? Depending on the make, Jeeps have an average mileage between 100,000 and 150,000 miles. A Jeep can last up to 300,000 miles when properly maintained and cared for. however, the owners of Jeeps on CarGuru say they usually last at least 200,000 miles.

How much is a rebuilt Jeep engine?

In terms of parts and labor, engine rebuilding usually costs between $2,500 and $4,000. It should take only a few minutes to replace the engine seal and bearings, then it should be removed, ing could include simply replacing bearings and seals, and obviously taking the engine out and re-installing it.

What engine is in the 2007 Jeep Commander?

In terms of parts and labor, engine rebuilding usually costs between $2,500 and $4,000. It should take only a few minutes to replace the engine seal and bearings, then it should be removed, ing could include simply replacing bearings and seals, and obviously taking the engine out and re-installing it.

How much to put a new engine in a Jeep Cherokee?

A used engine can cost between $3000-$4000 and a new engine can be costing between $4000 and $1500.

What was best engine in Jeep Commander?

What Is The Best Engine For The Jeep Commander? According to various users, the best engine option in the Jeep Commander has to be the 5.7 liters HEMI V8 engine. This is mainly because it has the capabilities of producing around 360 horsepower as well as powerful and efficient 375 pounds-feet of torque.

How many miles per gallon does a 2008 Jeep Commander get?

What Is The Best Engine For The Jeep Commander? According to various users, the best engine option in the Jeep Commander has to be the 5.7 liters HEMI V8 engine. This is mainly because it has the capabilities of producing around 360 horsepower as well as powerful and efficient 375 pounds-feet of torque.

How much horsepower does a 2008 Jeep Commander have?

What Is The Best Engine For The Jeep Commander? According to various users, the best engine option in the Jeep Commander has to be the 5.7 liters HEMI V8 engine. This is mainly because it has the capabilities of producing around 360 horsepower as well as powerful and efficient 375 pounds-feet of torque.

Is it worth replacing an engine?

New engines offer a long-term, reliable solution to your car troubles. On the other hand, used vehicles may come with their own set of engine problems. If your used vehicle replacement encounters engine issues, you could end up paying twice as much in the long run.

How much does it cost to install a new engine?

New engines start at around $4,000 for a 4-cylinder, around $5,500 for a V6 and $7,000 for a V8. Prices increase from these figures based on complexity of the engine and the brand of car.

Is it cheaper to rebuild or buy a new engine?

A scheduled overhaul is almost always less expensive than a new engine. Rebuilding to repair is usually cheaper than buying a new engine, too. You may save up to half of the cost of a new engine by rebuilding. However, sometimes rebuilding is not a good option.

Why was the Jeep Commander discontinued?

Unfortunately, the Commander wasn’t tremendously well received, mainly due to quality issues, and Jeep got rid of it after the 2010 model year.

How much is a tune up on a Jeep Commander?

Jeep Commander Repair: Service and Maintenance Cost. The annual maintenance cost of a Jeep Commander is $639.

Are Jeep Commanders good jeeps?

The Jeep Commander is a comfortable, safe, reliable, and well-performing vehicle. The Jeep Commander is a truck-of-all-trades and caters to both outdoor enthusiasts and daily city commuters who want a car with plenty of room for storage and seating and one that can handle different terrains and weather.

Which Jeep is most reliable?

The org gave the Gladiator an excellent predicted reliability score, the Grand Cherokee came in second with an average rating.

  • 2020 Hennessey Jeep Gladiator | Hennessey.
  • 2021 Jeep Gladiator | Jeep.
  • Jeep Gladiator Mojave interior | Jeep.

What years did jeep make commanders?

Jeep Commander (XK)

Jeep Commander
Production July 18, 2005 – 2010
Model years 2006–2010
Assembly United States: Detroit, Michigan (Jefferson North Assembly Plant) Austria: Graz (Magna Steyr, Commander XH)
Designer Don Renkert (2002)

What replaced the Jeep Commander?

The Jeep® Commander was discontinued in 2010. WHAT JEEP® BRAND SUV IS THE MOST SIMILAR TO THE COMMANDER? The Jeep® Grand Cherokee carries on the legacy of the Commander as a large, capable Jeep Brand SUV.

How many pounds can a Jeep Commander tow?

When it is powered by the 3.7L V6 the Jeep Commander has a fairly lackluster tow capacity of 3,500 lbs. Following the 80% rule of tow capacity that leaves the Jeep Commander pulling a 2,800 lb pop up.

How much can a 2007 Jeep Commander tow?

When it is powered by the 3.7L V6 the Jeep Commander has a fairly lackluster tow capacity of 3,500 lbs. Following the 80% rule of tow capacity that leaves the Jeep Commander pulling a 2,800 lb pop up.

Is the Jeep Liberty reliable?

Are Jeep Libertys Reliable? The Jeep Liberty has received average scores on all major reliability ratings. The Jeep Liberty has received average scores on all major reliability ratings. RepairPal rates it a 3.5 out of 5, ranking it 14th out of 26 midsize SUVs.