Skip to content

How much are the coil packs for a 2012 jeep liberty?

How much is a coil pack for a Jeep Liberty?

The average cost for a Jeep Liberty ignition coil replacement is between $91 and $113. Labor costs are estimated between $26 and $33 while parts are priced between $65 and $80.

What are the symptoms of a failing coil pack?

Common Symptoms of a Faulty Coil Pack

  • A rough idle.
  • An unexplainably louder-than-usual engine.
  • A noticeable lack of power.
  • A significant drop in RPMs while accelerating for no apparent reason.
  • A blinking or intermittently activating check engine light.
  • An active gas warning light when the vehicle has plenty of gasoline.

How much do coil packs usually cost?

But in general, a set of coil packs will set you back around $150 – $300. Add labor cost of around $100 – $150 to the equation and the service bill can be as high as $450 for a coil pack replacement. Of course, some cars may cost more than this.

How much does it cost to replace coil pack?

The average cost for ignition coil replacement is between $209 and $278. Labor costs are estimated between $51 and $64 while parts are priced between $158 and $214. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How many ignition coils does a Jeep Liberty have?

Replacing all 6 ignition coils at same time.

How do you check the ignition coil on a Jeep Liberty?

Press the left ohmmeter lead against the center prong inside the electrical connector on the back of the coil pack. Press the other lead against each of the spark plug boots, one at a time. The ohmmeter rating should be below 2 ohms. If the ohmmeter rating is above 2 ohms, replace the coil pack.

Should I replace all coil packs at once?

Coil packs are reliable and likely to last the lifetime of a vehicle. If anyone goes bad, there is no need to change all of them. However, if one pack starts malfunctioning after the odometer has around 75,000 miles, you should replace them all.

Can you drive with faulty coil pack?

It is possible to drive with a faulty Coil On Plug (COP), but not advisable. Driving with a faulty waste spark ignition system won’t be possible. Driving with a faulty coil pack can damage other components of the engine.

How long do coil packs last?

Usually, coil packs are made to last the lifetime of the car. However, that is rare, and most coil packs last about 1 to 5 years on average. In case of mileage, coil packs should not require replacement for at least 120 to 150 miles.

Do coil packs replace spark plugs?

So, should you replace coil packs with spark plugs? It depends. The most common component to replace in conjunction with the ignition coils are the spark plugs. Worn spark plugs can cause unnecessary load on the coils and there is often some overlap in the labor required to replace both components.

How long does it take to change coil pack?

A change of an ignition coil pack can take several seconds. In most four-cylinder cars, it will take no more than one hour for your coil pack to be replaced. A larger engine will require more work and could have other components removed as well.

How many coil packs does a car have?

How Many Coil Packs Does A Car Have? There are six spark plugs per cylinder, and one per head of tires. Six coil packs can also be used in a cylinder, another for each.

Can you replace one coil pack?

You can, of course, change just one coil. However, as a mechanic, I’ve seen it so many times, when one coil fails, another isn’t too far behind. If your coils are easy to access, replacing them as they fail is OK, apart from the inconvenience. It is possible to drive a car with a faulty coil, but it isn’t advised.

Can you replace ignition coils yourself?

You can replace a failing ignition coil fairly easily at home, but remember that you’re dealing with high voltages so must disconnect your battery before you start.

Is it hard to replace ignition coil?

Remove the Ignition Coils

Ignition coil replacement can be challenging on some vehicle’s engines. The greatest obstacles you’ll face is accessibility and sticking components such as the ignition coil insulator boots sticking to the spark plug and tearing apart during the removal process.

How do you change the ignition coil on a 2012 Jeep Liberty?

Remove the Ignition Coils

Ignition coil replacement can be challenging on some vehicle’s engines. The greatest obstacles you’ll face is accessibility and sticking components such as the ignition coil insulator boots sticking to the spark plug and tearing apart during the removal process.

What is code P2302?

The P2302 code means that the ignition coil A secondary circuit has experienced a malfunction. The malfunction is detected by the vehicle’s ECU when it tries to control the secondary ignition circuit.

What is code P2317?

What the P2317 code means. This trouble code indicates that the powertrain control module has detected an abnormal reference voltage from the one of the engine’s ignition coils.

Why is my Jeep Liberty jerking?

An indication that a vehicle is not receiving the right mixture of air and fuel is if the vehicle jerks or surges forward at high speed. Several components of the fuel or air intake system could cause this jerking or surging sensation to happen. Issues within these systems can also cause fuel economy to worsen.

What causes a jeep to misfire?

Multiple misfires can be caused by many reasons from a faulty ignition system, fuel system, or internal engine failure. The most common reason for this to happen is faulty or worn-out spark plug coil packs, especially if it’s been a while since you had a tune-up.

How do you test a jeep coil pack?

Multiple misfires can be caused by many reasons from a faulty ignition system, fuel system, or internal engine failure. The most common reason for this to happen is faulty or worn-out spark plug coil packs, especially if it’s been a while since you had a tune-up.

Will a new coil pack improve performance?

You cannot expect aftermarket coils to increase the horsepower, reduce emissions, increase gas mileage, or smooth out your engine’s performance without having the coil removed in the stock car.

What is the difference between an ignition coil and coil pack?

The ignition coil is a device which is capable of generating a high voltage pulse which goes to the spark plug. Coil pack refers to the set of coils used in the engine which do not run a distributor. A computer controls the set of coils. Each coil will supply power to the individual spark plug or a set of spark plugs.

Are cheap ignition coils any good?

While low-grade coils cause misfiring and difficult starting, using them can have more serious consequences. As coils are controlled by the engine management computer (ECU) they rely on fly-back voltages that are fed back after the spark plug has been ‘fired.