Skip to content

How long do ball joints last jeep wrangler?

ronjenx said: Stock JK OEM ball joint life expectancy varies widely. Some have gone out in 20,000 miles, some have lasted over 100,000 miles. Mine lasted 76,000 miles.

How often replace ball joints on Jeep Wrangler?

Ball joints are one of those common factory wear items that will need to be replaced on your Jeep, with the typical service interval of tens of thousands of miles when running the stock suspension and tires.

How many miles do ball joints usually last?

While ball joints may last 70,000 miles or more, they don’t last forever. Their actual lifespan will depend on your driving habits, road conditions and exposure to road splash and salt.

How much does it cost to replace ball joints in a Jeep?

Jeep Grand Cherokee Suspension Ball Joint Replacement Cost Estimate. The average cost for a Jeep Grand Cherokee suspension ball joint replacement is between $195 and $245. Labor costs are estimated between $88 and $111 while parts are priced between $107 and $134.

How long should a suspension ball joint last?

A: A ball joint’s lifespan will depend heavily on the type of vehicle and the kinds of driving it’s subjected to. In general, you can look to get at least 70,000 miles out of a ball joint before it needs replacement.

How do you know if your ball joints are bad on a Jeep JK?

Steering wander, death wobble, poor road tracking, or suspension popping can all be signs of worn ball joints. However, these symptoms might also be due to other worn steering components or loose wheel bearings. To check a set of ball joints at one front tire, it’s best to jack the tire off the ground.

How long does it take to change ball joints on a Jeep?

The work will take about 1 hour to complete. However, additional time may be necessary depending on how dealer appointments are scheduled and processed.

How do you know if ball joints need replacing?

4 Signs Your Vehicle Needs The Ball Joints Replaced

  1. Clunking, Rattling Noise.
  2. Loose, Wandering Steering Feel. …
  3. Harsh Cabin Vibrations. …
  4. Uneven Wear On Front Tires. A loose ball joint in the front suspension will introduce some “play” that allows one of the front wheels to come out of alignment with the other. …

Should you replace both ball joints at the same time?

If one ball joint is worn out, chances are the ball joint on the opposite side is also bad or nearing the end of its service life. Many technicians recommend replacing both joints at the same time (both lowers, both uppers or all four).

How do I know if my ball joints are worn out?

Grasp the top and bottom of the tyre and rock it in and out along the wheel’s vehicle axis. If the ball joints are working well, there should be little to no play in this movement. Noise and play from the top – this indicates a problem with the upper ball joint.

How many ball joints are on a Jeep Wrangler?

Usually, most auto vehicle and Jeep models consist of four-ball joints in front of their suspension, which mainly ensures the connection between the wheels and the suspension system. Although ball joints are not prone to fail or wear out very easily, you should replace them whenever they turn bad.

How long does it take to replace ball joints?

It can take a little over an hour to get it replaced, so the full ball joint replacement cost will be between $100 and $400.

How do you change a ball joint on a Jeep?

It can take a little over an hour to get it replaced, so the full ball joint replacement cost will be between $100 and $400.

How often do ball joints need replacing?

Generally speaking, you should expect to have to have your ball joints replaced between 70,000 to 150,000 miles of driving. Excessive play in the joint can cause additional wear, and if a ball joint fails, your car’s suspension could collapse and you could lose control of the vehicle.

What happens if ball joint fails?

No matter the form of breakage, the end result is catastrophic. When the ball joint completely breaks, the wheel is free to move in any direction. Typically, the wheel will turn outwards, slam against the fender and drag the tire until the brakes are applied.

Can you replace ball joint without replacing control arm?

Some ball joints can be replaced independently of the control arm, but not an easy DIY (need a press to get the ball joint out)! If this is going to be a DIY, change the entire control arm. Some ball joints can be replaced independently of the control arm, but not an easy DIY (need a press to get the ball joint out)!

How long can you drive on bad ball joints?

short answer is… it depends on how bad they are. the lower ball joint typically gets more wear than the upper. i’d say, if there’s just a little wiggle in either joint, you should have no problem driving 500 miles.

Are ball joints easy to replace?

Ball joint replacement is not straightforward, as they can be very tricky to access and install – especially with age and rust. On some cars, the ball joint is integrated into the control arm. If you’re not familiar with the suspension and wheel assembly, it’s best to visit a garage for a professional check.

Can bad ball joints cause death wobble?

Worn ball joints and unit bearings are also a significant cause of death wobble.

How much does a ball joint press cost?

In general, ball joints are inexpensive with a range between $20 to $80 each. Labor will vary greatly by model. Some vehicles cost as low as $60 to $80. Yet others, especially four-wheel drive trucks, can range from $160 to $200 per ball joint.

How long does it take to replace Jeep JK ball joints?

tangofox007 said: Two hours per side is what it takes me to replace ball joints.

How do I change a JK ball joint?

tangofox007 said: Two hours per side is what it takes me to replace ball joints.

What do bad ball joints sound like?

metallic clunking noise: one of the most noticeable and common symptoms of a bad ball joint is a clunking or knocking noise when the suspension moves up and down. a worn ball joint will begin to rattle inside the socket when driving over an uneven road, rough terrain, potholes or speed bumps.

Which ball joints wear out first?

The lower ball joint usually takes the biggest hits and wears out first. Not only does it need to handle the load of the vehicle, but it also absorbs the shocks of potholes and other bone-jarring road hazards.

What should you replace when doing ball joints?

The lower ball joint usually takes the biggest hits and wears out first. Not only does it need to handle the load of the vehicle, but it also absorbs the shocks of potholes and other bone-jarring road hazards.

Do ball joints affect steering?

A worn ball joint will significantly affect your steering and suspension. If the ball joint fails completely, your steering and suspension may partially collapse, causing your wheel and tire to move outward from the vehicle.