Either way, Advance Auto Parts has 36 different Shocks & Struts products in our inventory ranging from $15.79 to $845.99. That means you can find the exact parts or products you need to keep that 2003 Jeep Liberty running smoothly.
Does a Jeep Liberty have shocks or struts?
In the Jeep Liberty the front is a coil-over IFS and the rear is a solid live axle. The fronts uses struts and the rear uses shocks. Once you lift your Liberty you must swap out the stock shocks &, struts with longer ones.
How do I know if it’s my shocks or struts?
Both shocks and suspensions will be located near the tires. Shocks will be vertical and resemble a pneumatic pump. Struts are horizontal and look to be just extensions of the wheels.
Does my car need shocks or struts?
If your driving frequently is over bumpy, rough roads that put more stress on the shock absorbers and front struts, then you will probably need to new shocks and struts for your vehicle more often than if you drive mainly on smooth pavement. Carrying heavy loads also will wear out shocks faster.
How much does it cost to replace shocks on a Jeep Liberty?
The Best in Auto Repair
The average cost for a Jeep Liberty suspension shock or strut replacement is between $506 and $547. Labor costs are estimated between $158 and $200 while parts are priced at $347.
Should I replace all 4 shocks at the same time?
Shocks and struts should always be replaced in pairs (front axle or rear axle), and it’s even better to replace the shocks/struts on all four wheels at one time. This helps maintain reliable handling and a consistent response on both sides of the vehicle.
How long does it take to replace front struts?
Typically, it takes around one to two hours to change struts, according to most professional mechanics. Even if you decide to replace them on your own, the estimated time is the same as long as you have previous mechanical skills and follow the process correctly.
Are struts in the front or back?
Struts are typically installed in conjunction with the front wheels, but depending on a vehicle’s setup and driveline, they can also be mounted at the rear wheels. Just as there are different types of cars, there are different types of struts.
Do car’s have both shocks and struts?
They’re not. Every wheel on your vehicle has either a shock or a strut – never both, never neither. However, you may have struts on your front wheels and shocks on your rear wheels.
What are the signs of a bad strut?
Signs of Bad Struts
- Clunking Noises When Hitting a Bump. …
- Bumpy Ride. …
- Hovering Front End. …
- Irregular Tire Wear. …
- Noticeable Vibrations While Driving. …
- Erratic Braking. …
- Fluid Leakage. …
- Irregular Tire Wear.
What happens if you don’t replace struts?
Reduced braking efficiency – Worn shocks and struts can have an adverse effect on the performance of your brakes. Your vehicle’s stopping distance may increase, which can be critical in an emergency braking situation. You’re also at increased risk of skidding on wet roads.
Do you need an alignment after replacing struts?
However, your vehicle does have adjustable camber settings and so, yes, the vehicle would have to be aligned if the struts were replaced. Once new struts are installed, if the alignment is roughly within spec., you can wait until you get your new tires to perform the alignment.
What will bad struts do to a car?
Bad struts aren’t able to absorb as much force, putting excess strain on the brake pads and brake rotors. This not only wears down the brake components quickly, it also increases stopping distance dramatically. At highway speeds, a car driving on struts at 50% effectiveness will take an additional 15-20 feet to stop.
Is it OK to replace front shocks only?
Do you have to replace both shock absorbers or struts if only one is bad? It’s not necessary, but it’s usually recommended to replace them in pairs, for example, both front struts or both rear shocks. This is because a new shock absorber will absorb road bumps better than the old one.
Can I replace rear shocks only?
Yes, you can replace car shocks on your own without going to a mechanic. I wouldn’t suggest trying this job on your own unless you have a nice jack stand to throw the car on. Otherwise, you’ll need at least two high-quality jack stands.
Is it easy to replace shocks?
Shocks are pretty straightforward—you usually just have to disconnect the top and lower mount to be able to remove them. However, on certain cars, you may need to remove some paneling to gain access to the shocks.
When replacing struts What else should I replace?
If you are replacing a strut on a vehicle, you need to inspect the sway bar links and look up if there are cam bolts that can make camber adjustable. The sway bar links will make sure the suspension is silent after the strut is replaced and they probably need replacement due to wear.
How much does a strut replacement cost?
To replace a pair of struts, the total cost on average is between $400 and $1000, including wheel alignment. An individual strut assembly costs approximately $150 to $350, while the labor cost is $100 to $300 for a pair.
How much does it cost to replace front shocks and struts?
A typical shock and strut replacement can set you back anywhere between $450 and $1,100 on parts and labor combined. An individual shock and strut assembly costs around $150 to $900, while estimated labor costs for replacing a shock and strut assembly can range anywhere from $150 to $300 per assembly.
How do you check struts on a car?
Performing a road test is the only way to test shocks and struts
- Start by checking tire pressure and tire condition. …
- Check the condition of steering components. …
- Check the condition of the suspension components line control arm bushings, sway bar bushings and sway bar end links.
What is the difference between a strut and strut assembly?
A loaded strut (also known as a quick strut) comes as an assembly with everything pre-installed, including the coil spring, mount, etc. An unloaded strut does not come as an assembly—all you get is the strut itself.
Are front and rear shocks the same?
To answer your question, rear shocks are a structural part of the vehicle suspension system, and front shocks aren’t. The rear shock is an important part of the vehicle’s steering system, and it has a big impact on how the vehicle is aligned.