Skip to content

Where is the water pump on a ford explorer?

How much does it cost to replace a water pump on a Ford Explorer?

The average cost for a Ford Explorer water pump replacement is between $903 and $1,103. Labor costs are estimated between $512 and $646 while parts are priced between $391 and $457. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Where is the water pump located?

Generally, the water pump is located on the front of the engine. A drive pulley is mounted on the pump hub, and the fan is attached to the pulley.

How much does it cost to replace a Ford water pump?

Ford F-150 Water Pump Replacement Cost Estimate. The average cost for a Ford F-150 water pump replacement is between $666 and $730. Labor costs are estimated between $146 and $184 while parts are priced between $520 and $547.

How long does a water pump last on a Ford Explorer?

Water pumps are designed to last at least 100,000 miles, however, if your water pump fails, you should replace it with a high-quality original-equipment level unit. Less expensive replacement pumps are available, but they might only have a service life of 30,000 miles.

How much does it cost to replace a water pump in a 2015 Ford Explorer?

Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).

How much does it cost to replace a water pump in a 2013 Ford Explorer?

What’s the replacement cost for a 2013 Ford Explorer 3.5 Water pump ? The average cost for a Ford Explorer water pump replacement is between $546 and $730. Labor costs are estimated between $436 and $551 while parts are priced between $109 and $180.

What are the symptoms of a bad water pump in a car?

Five Signs Your Water Pump Is Failing

  • Overheating. A dead or dying water pump cannot circulate coolant through your vehicle’s engine and, as such, the engine will overheat. …
  • Coolant Leaks. Coolant leaks from the water pump are common and a clear sign that it’s time to replace the pump. …
  • Corroded Water Pump. …
  • Whining Noises.

How do I know if my water pump is pumping?

With the engine off, open your hood and locate the water pump pulley. With gloves on, grab it and wiggle it back and forth. There should be no movement, if there is, this along with the noise is a good indication you may have a water pump problem.

How do you know if your water pump is bad?

Here are 5 common symptoms of a bad water pump:

  1. Coolant Leak at the Front-Center of your Car. …
  2. Rust, Deposit Buildup, and Corrosion of the Water Pump. …
  3. Water Pump Pulley is Loose and Making Whining Sounds. …
  4. Engine is Overheating. …
  5. Steam Coming from your Radiator.

Can you replace a water pump yourself?

A specialist workshop usually estimates a good three hours of work for changing a water pump. However, if you do this work yourself, the only costs incurred are those for a new water pump. These are usually between 50 and 500 pounds.

Is it worth replacing water pump?

About Water Pump Replacement

The water pump is an essential component that keeps the coolant circulating, a critical role in ensuring that the engine maintains the proper operating temperature. Without coolant being circulated, the engine will overheat, leading to premature wear and damage.

What causes water pump failure?

Contaminated coolant, non-compatible coolant, or mixing coolants of different chemistries leads to premature water pump failure. Harmful contamination is common in systems that are not properly maintained.

How much does it cost to fix water pump in car?

The average water pump replacement cost is $550, with prices ranging from $461 to $638 in the US in 2020. But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314. Estimate doesn’t include fees and taxes.

How do you change a water pump on a 2006 Ford Explorer?

The average water pump replacement cost is $550, with prices ranging from $461 to $638 in the US in 2020. But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314. Estimate doesn’t include fees and taxes.

How do you change a water pump on a 2002 Ford Explorer?

The average water pump replacement cost is $550, with prices ranging from $461 to $638 in the US in 2020. But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314. Estimate doesn’t include fees and taxes.

How much does it cost to replace a timing chain on a Ford Explorer?

The Best in Auto Repair

The average cost for a Ford Explorer timing chain tensioner replacement is between $969 and $1,150. Labor costs are estimated between $613 and $774 while parts are priced between $356 and $376.

How do I know if I have a bad water pump or a head gasket?

Pay attention to what your vehicle is telling you and avoid being stranded, and stuck with an even larger repair bill. Coolant leaking from the water pump is one major indicator of a failing head gasket. Our mechanics can pressure-test the engine and narrow down the options of where the leak may be occurring.

Can you drive with a bad water pump?

Heating and cooling may be affected by the vehicle. The car may begin to overheat as well. It is possible to drive your vehicle without a water pump, but not good to. Some people in the racing circuit or who drive racing vehicles purposefully remove their water pumps to obtain more horsepower to their engine.

How do I know if my thermostat or water pump is bad?

Q: How do I know if my thermostat or water pump is bad?

  1. Engine Overheating.
  2. Temperature gauge fluctuations.
  3. Coolant leak from the front of your car.
  4. Steam coming from the front of your car.
  5. Nosey or loosen water pump pulley.
  6. Coolant leaks around the thermostat housing.

Will a bad water pump cause a car not to start?

A broken water pump is a serious problem, that can cause overheating and serious engine damage, but will rarely ever affect the vehicle’s starting ability. Though it may not fix the starting issue, I would replace the water pump as soon as possible to prevent the vehicle from overheating.

What does bad water pump sound like?

If you hear a high-pitched, whining sound that increases as you accelerate – it could indicate a faulty water pump. These sounds are caused by a loose belt and the belt becomes loose when the pulley is loose or the bearings are wearing out.

How do you fix a water pump?

If you hear a high-pitched, whining sound that increases as you accelerate – it could indicate a faulty water pump. These sounds are caused by a loose belt and the belt becomes loose when the pulley is loose or the bearings are wearing out.