Skip to content

What is a throttle body on a ford explorer?

What happens when the throttle body is faulty?

When a throttle body is not functioning correctly, you’ll usually notice a distinctly poor or very low idle. If the problem is really severe, you might even begin stalling when coming to a stop or when the throttle is quickly pressed.

What is the throttle body on a Ford Explorer?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum.

How much is a throttle body for a Ford Explorer?

The average cost for a Ford Explorer throttle body replacement is between $274 and $321. Labor costs are estimated between $62 and $78 while parts are priced between $213 and $243. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Can you drive with a messed up throttle body?

While you can drive with a bad throttle body, you definitely shouldn’t. There are two reasons for this. First is the safety concern. When your throttle body isn’t working the way it should, your vehicle can accelerate or fail to accelerate at the most inopportune time.

How much does it cost to fix a throttle body?

The average throttle body replacement cost is between $250 and $650, depending on the car model and labor costs. The throttle body cost between $200 and $500, while the labor cost is around $50 and $150. The throttle body can be differently priced depending on different vehicles, models, and the manufacturing company.

What are the symptoms of a dirty throttle body?

When the throttle body gets dirty, it has a direct effect on how smoothly the engine operates. Signs indicating a problem include rough idling, jumpy or sluggish acceleration, poor fuel economy, and stalling. With the use of a throttle body cleaning product, the dirt and debris buildup are easily removed.

How do you reset a throttle body?

Leave the key off for a moment, turn the key to the “On” position again, wait 3 seconds, and press the accelerator 5 times in 5 seconds. Wait 7 seconds, and hold the accelerator down. The check engine light should start blinking, continue to hold pedal down until it stops blinking. You can then start the car.

How do you clean the throttle body on a Ford Explorer?

Leave the key off for a moment, turn the key to the “On” position again, wait 3 seconds, and press the accelerator 5 times in 5 seconds. Wait 7 seconds, and hold the accelerator down. The check engine light should start blinking, continue to hold pedal down until it stops blinking. You can then start the car.

What is the throttle body?

The throttle body is an important part of your air intake system that controls the air flowing into your engine. It’s located between your air intake and engine manifold where fresh air is pulled into the engine for the combustion process.

Can a throttle body be repaired?

You may be able to restore the throttle body’s operation by cleaning the throttle body can properly restore its operation.

How long do throttle bodies last?

While there is no set mileage when it comes to the lifespan of the throttle body, it is suggested that you give it a thorough cleaning at about 75,000 miles. Cleaning the throttle body allows your car to operate more smoothly and it helps increase its lifespan.

Should I clean or replace throttle body?

While throttle-body cleaning is good preventative car maintenance, it should also help engine drivability. In fact, if you’ve noticed a rough idle, stumbling initial acceleration or even stalling – all when the engine is fully warmed up – a dirty throttle body could be the culprit.

How long does it take to change a throttle body?

How long does a throttle body replacement take? The job usually takes around an hour for either a replacement or a cleaning.

Can throttle body cause overheating?

Another sign of a bad throttle body temp sensor is problems starting the engine. Though this can result from a number of causes, one of them can be an improper air/fuel mixture incited by a broken temperature sensor. In this case, the engine may be too hot for you to effectively start the car.

What causes a throttle body to get dirty?

Here’s how the throttle body gets dirty. When an engine shuts down, hot exhaust gases and unburned fuel float to the top of the engine. As the vapors bake from the engine heat, they form black sooty carbon deposits inside the throttle body.

Can you clean a throttle body without removing it?

You don’t need to remove a throttle body to clean it. If you have a DBW throttle body, DO NOT MOVE THE THROTTLE PLATE MANUALLY TO CLEAN IT, especially with the key in the ON position. This will confuse the computer and it will have to be reset in order for the engine to start and run again.

How do I know if my throttle body needs cleaning?

The 7 Signs That Could Mean Your Throttle Body Needs Cleaning

  1. Grime Build Up. …
  2. Poor Fuel Economy. …
  3. Poor or High Idle. …
  4. Uneven or Slow Acceleration. …
  5. Electrical Problems. …
  6. Airflow Disruptions. …
  7. Check Engine Light.

How do I reset my Ford throttle body?

Turn ignition switch “OFF” wait at least 10 seconds. Turn ignition switch “ON” and wait at least 2 seconds. Turn ignition switch “OFF” wait at least 10 seconds. Throttle Valve Closed Position Learning.

Can you drive with electronic throttle control light on?

It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.

What happens when the electronic throttle control light comes on?

solution: this indicates a serious failure of your throttle control system. the engine computer is programmed to go into limp mode when the system malfunctions, in an attempt to limit your speed and prevent damage to the engine. it can be caused by a sensor failure, or even by outside electromagnetic interference.

Why is my Ford Explorer idling high?

Malfunctioning Throttle: A malfunctioning throttle system can cause both a high or low idle as well as an engine stall. A dirty air intake or cracked air intake tube is often the culprit. Computer Malfunction: If the powertrain control module is malfunctioning, idle speed may be affected.

Why is my Ford Explorer shaking?

The most common causes for Ford Explorer shaking at high speeds are unbalanced wheels, misaligned wheels, tire damage, bent rim, bad wheel bearing and loose lug nuts. Less common causes are bad axle, worn suspension or steering parts or incorrect tire pressure.

Why is my Ford Explorer sputtering?

Fuel injector nozzles can become clogged over time, which can lead to a sputtering engine, slow acceleration and the car not having enough power. Fuel injectors can be cleaned if the problem is caught early, but as the conditions worsens, the injectors may have to be replaced.