Skip to content

Why is my dodge nitro not starting?

The most common reasons a Dodge Nitro won’t start are a dead battery, an alternator problem, or failed starter.

How do I reset my Dodge Nitro?

In modern cars and motorcycle with fuel injector the fuel pump is usually electric and located inside the fuel tank. The pump creates a higher pressure in the fuel lines, pushing the gasoline to the engine. The higher pressure raises the boiling point of the gasoline.

What is the main problems with a Dodge Nitro?

Image source: Wikimedia. Electrical issues are bound to come up when discussing the most common 2007 and 2008 Dodge Nitro problems. Many owners of these model years have complained about having an illuminated battery light, a horn that would blow randomly, and wiper systems that would automatically shoot water.

How do you reset the anti theft system on a Dodge Nitro?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

How much is a starter for a Dodge Nitro?

The average cost for a Dodge Nitro starter replacement is between $304 and $339. Labor costs are estimated between $88 and $111 while parts are priced between $216 and $228.

How do you reset a 2008 Dodge Nitro?

Dodge Nitro Oil Life Reset Procedure After Oil Change for Model Years 2008-2011:

  1. Turn the key to ON/RUN position with engine off.
  2. Fully depress and release the accelerator pedal 3 times within 10 seconds.
  3. Turn the key to the OFF position and then back on to confirm reset was accepted.

How do you reset a 2007 Dodge Nitro?

Dodge Nitro Oil Life Reset Procedure After Oil Change for Model Years 2008-2011:

  1. Turn the key to ON/RUN position with engine off.
  2. Fully depress and release the accelerator pedal 3 times within 10 seconds.
  3. Turn the key to the OFF position and then back on to confirm reset was accepted.

How long do Dodge Nitros last?

On average, a Dodge Nitro lasts between 200,000 – 220,000 miles. 28,41% of Dodge Nitro’s on the road today have reached a mileage of 150,000 miles or higher. 54,61% of them have reached a mileage between 100,000 – 149,999 miles, and 16,98% have a mileage below 99,999 miles.

Do Dodge Nitros have a lot of problems?

Dodge Nitro Reliability Problems. Nitro owners have made 311 complaints over 5 model years. Using our PainRank™ system we’ve ranked it 18th in overall reliability out of 29 Dodge models , with real electrical and interior concerns.

What replaced Dodge Nitro?

Dodge Nitro Reliability Problems. Nitro owners have made 311 complaints over 5 model years. Using our PainRank™ system we’ve ranked it 18th in overall reliability out of 29 Dodge models , with real electrical and interior concerns.

How do you know if your car is in anti-theft mode?

If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.

Can anti-theft stop car from starting?

It is possible that the system can trigger the car alarm or prevent the engine from running without any apparent reason. You have to shut it off if it is not working properly. The car won’t return to normal operation unless you fix the issue of anti theft device car wont start.

What triggers the anti-theft system in car?

The Anti-theft alarm system works with the help of sensors installed in and around the vehicle. An impact or the movements inside the car activates the sensors. This, in turn, triggers the Anti-theft alarm system and sounds the alarm. The alarm goes off and alerts the owner/people.

How do you reset the maintenance light on a 2011 Dodge Nitro?

The Anti-theft alarm system works with the help of sensors installed in and around the vehicle. An impact or the movements inside the car activates the sensors. This, in turn, triggers the Anti-theft alarm system and sounds the alarm. The alarm goes off and alerts the owner/people.

How many quarts of oil does a 2009 Dodge Nitro take?

Engine Oil

Viscosity: All TEMPS….5W-20
Capacity: With filter 5 quartsAfter refill check oil level.
Torque: Oil Drain Plug…25 ft/lbs

How do you reset the change oil light on a Dodge Nitro?

Dodge Nitro Oil Change Message Reset

  1. Shift the gearbox to Park Position.
  2. Close all doors.
  3. Push the start button to RUN Position (Ignition On) Don’t start the engine.
  4. Fully depress the GAS PEDAL slowly three times within 10 seconds Make sure to depress the pedal all the way down.

What does the red lightning bolt mean on my Dodge Nitro?

The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Get a code reader and scan the engine for any logged codes. The light may be on for a glitch and the electronic throttle control system needs to be reset.

How do you reset the gas cap on a Dodge Nitro?

How to Reset the Warning Light Gas Cap That Is Loose or Missing

  1. Turn off your vehicle’s engine. …
  2. Step to the gas cap door. …
  3. Replace the gas cap. …
  4. Close the gas cap door. …
  5. Use an OBD-II code scanner if the warning light does not disappear. …
  6. Continue driving the vehicle.

Are Dodge Nitros good on gas?

Dodge has manufactured models of Nitro 4WD for 5 years. They average 17.3 combined miles per gallon, with the latest 2011 Nitro 4WD below average at 17 combined MPG.

Fuel Efficiency.

Vehicle Model 2010 Dodge Nitro 4WD
Combined MPG 17
Highway MPG 21
City MPG 15

Is a Dodge Nitro a reliable vehicle?

The Dodge Nitro Reliability Rating is 4.0 out of 5.0, which ranks it 8th out of 26 for midsize SUVs. The average annual repair cost is $582 which means it has average ownership costs. The severity of repairs is average and the frequency of those issues is low, so major repairs are uncommon for the Nitro.

What kind of oil do you put in a 2007 Dodge Nitro?

Engine Oil

Viscosity: All TEMPS….5W-20
Capacity: With filter 5 quartsAfter refill check oil level.
Torque: Oil Drain Plug…25 ft/lbs

Are Dodge Nitro fast?

The Nitro accelerates promptly from 0 to 60 mph in just seconds. If you want to go fast, the Nitro has a top speed of miles per hour. Despite this excellent power train output, the Dodge Nitro’s fuel economy is rated at 16 miles per gallon in the city and 22 highway miles per gallon.

Does the Dodge Nitro have transmission problems?

It’s a type of car problem that’s not hard to notice. 2011 Dodge Nitro transmission problems could include shifting delays, jumping or grinding during acceleration, the car shaking at any speed, or a burning smell or whistling sounds coming from under the hood.

What are common problems with 2011 Dodge Nitro?

Top 2011 Dodge Nitro Problems

  • Engine May Not Start at Times. …
  • Power Door Lock Inop. …
  • Liftgate ajar switch issue. …
  • Remote Keyless Entry May Not Work at Times. …
  • PCM Software Update Available. …
  • Overhead Video Screen Does Not Power On. …
  • Coolant leak from reservoir. …
  • The Automatic Transmission may Stay in the Default Mode.

Are Dodge Nitros still made?

The Dodge Nitro is a small SUV and is similar to the Jeep Liberty. Introduced in 2007, the five-passenger Nitro offered rear- and four-wheel configurations and two V6 engine choices. Dodge discontinued the Nitro in 2011, ending a five-year model run.

Is Dodge Nitro a 7 seater?

The Nitro is a 7 seater 4 cylinder car and has length of, width of and a wheelbase of .

Are Dodge Nitros 4 wheel drive?

All versions of the Nitro are available with either rear-wheel drive or four-wheel drive (4WD). Nitro 4x4s have a part-time system with high- and low-range gearing. Properly equipped, the Nitro can tow up to 5,000 pounds regardless of drivetrain.

What does it mean if car won’t start?

If your vehicle won’t start, it’s usually caused by a dying or dead battery, loose or corroded connection cables, a bad alternator or an issue with the starter. It can be hard to determine if you’re dealing with a battery or an alternator problem.

Will disconnecting battery reset car alarm?

If you’re still having trouble with the alarm, disconnecting your car’s battery may be the next best option. This will both silence the alarm and reset it—or at least it should. You may also want to refer to your owner’s manual for the location of the alarm’s transmitter system.

How long does it take for the anti-theft system to reset?

Leave the key there for 15 minutes, it doesn’t always take that long, but it can. After that time, check to see if the anti-theft light has gone out, if one was lit up. Turn the key backward two places to the Lock position, then wait three more minutes. When that has elapsed, try to start the car.

How do I reset my immobilizer?

Hold the panic button for five seconds to reset the immobilizer. Then press the lock button twice and wait ten meters from the car for ten minutes.

How do you reset theft mode?

Turn on the car ignition by inserting the car key into the car’s ignition. All the accessories of the car are activated except the engine. If the car’s anti-theft light is not blinking, allow the system to reset itself. The resetting is done by turning the key to the off position and resting there for some minutes.

Is there a fuse for anti-theft system?

You can find the alarm fuse in the panel. Look in the owner’s manual to find the exact location of the fuse used by the security system. While the fuse is out, the car is not going to start. However, you can reinsert it and hopefully reset the alarm.

Where is the anti-theft fuse located?

It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box. If you do not find an alarm fuse inside of the car, look in the fuse box under the hood on the driver’s side. Your car model may or may not have additional fuse boxes.

How do you reset the check engine light on a 2009 Dodge Nitro?

In order to reset a check engine light when using a scan or other method, detach the negative battery cable from a button and wait a few moments before clicking the button. In most cases this will reset the diagnostic system on your vehicle, and the light will flicker red if the underlying problem is allayed.

How do you change the oil on a 2008 Dodge Nitro?

In order to reset a check engine light when using a scan or other method, detach the negative battery cable from a button and wait a few moments before clicking the button. In most cases this will reset the diagnostic system on your vehicle, and the light will flicker red if the underlying problem is allayed.

How do you reset the change oil light on a 2007 Dodge Caliber?

How to Reset Oil Life: Dodge Caliber 2007-2012

  1. 1-Turn the ignition to run (second position) Add Tip Ask Question Comment Download.
  2. 2-Press the accelerator pedal all the way down three times within 10 sec. …
  3. 3-Turn ignition OFF. …
  4. 4-Then turn the ignition to RUN or start the engine to verify if the oil life has been reset.

How much antifreeze does Dodge Nitro hold?

Coolant Capacity 13.4 L (14.2 qt.)

What kind of oil does a Dodge Nitro use?

What is this? Dodge Nitro owners with the 3.7L engine should use SAE 5W-20 engine oil for all operating temperatures.

What type of transmission does a Dodge Nitro have?

Three transmissions are offered on the Dodge Nitro: a six-speed manual, a four-speed automatic and a five-speed automatic. The six-speed manual transmission is standard on the Dodge Nitro SXT 4×2 and 4×4 models with the 3.7-liter V-6 engine. The transmission provides optimal shift quality and improved quietness.

What oil goes in a 2008 Dodge Nitro?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.