Skip to content

Why does my dodge ram crank but not start?

When a dodge ram 1500 will crank but not start, it is likely caused by a failing starter, the alternator, or a dying battery. If your Dodge Ram 1500 is able to turn over but not start, you are most likely dealing with a failed starter motor, fuel pump and in some cases weak battery.

What would cause a Dodge Ram not to start?

The most common reasons a Dodge Ram 1500 won’t start are a dead battery, an alternator problem, or failed starter.

How do I know if my Dodge Ram fuel pump is bad?

6 Common Signs of a Faulty Fuel Pump

  1. Whining Noise From the Fuel Tank. If you notice a whining noise coming from the location of your fuel tank, the fuel pump is probably beginning to fail. …
  2. The Engine Sputters or Surges. …
  3. Trouble Starting the Car. …
  4. Loss of Power Under Load. …
  5. Reduced Gas Mileage. …
  6. Stalling at High Temperatures.

What is the PCM on a Dodge Ram?

The PCM–or powertrain control module–in a Dodge is responsible for controlling many of the electrical systems in the vehicle. This includes airflow to the engine, temperature and more.

What is TIPM Dodge Ram?

The Totally Integrated Power Module (TIPM) is the gateway or distribution box for nearly the entire electrical system in late-model Chrysler products. Its main purpose is to take the commands from various switches and other modules and send those commands in the form of voltage or ground to wherever it needs to go.

Why does my Dodge Ram tick when I start it?

The Dodge Ram Hemi tick could be caused by: Broken or loose exhaust manifold bolts (this is the most common answer) Loose spark plugs (this is the second most common answer) Roller rocker on the camshafts.

How do I fix remote start disabled?

Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.

What are the signs of a bad fuel injector?

Below are the most common symptoms of bad fuel injectors.

  • Check Engine Light Illuminates Solid or Flashes. One of the engine issues that can cause the check engine light to come on or flash is a dirty or malfunctioning fuel injector. …
  • Rough Idling/Irritating Idle Noise. …
  • Engine Misfiring. …
  • Fuel Leaks.

What are the symptoms of a bad fuel filter?

Here are five of the bad fuel filter symptoms to watch for:

  • You have a hard time starting car. If the problem is the fuel filter, and it isn’t changed soon, you may find that your vehicle won’t start at all.
  • Misfire or rough idle. …
  • Vehicle stalling. …
  • Fuel system component failure. …
  • Loud noises from the fuel pump.

How do I check if my fuel pump is working?

Listen for the fuel pump: Put your ear near the fuel tank and have an assistant turn the ignition key to the “on” position. The fuel pump should make an audible noise if it’s working properly. Whack the fuel tank: Have an assistant crank the engine while you hit the fuel tank with a rubber mallet.

How do you reset a PCM on a Dodge?

Dodge technicians often debate as to when and if you even need to reset the PCM.

  1. Open the hood of the Durango.
  2. Locate the battery and remove the black-wired negative terminal from the battery.
  3. Turn the ignition key to the “on/crank” position for 30 seconds, then replace the ignition key to the “off” position.

What causes PCM failure?

Water is the primary element to avoid as exposure to it can render the PCM irreparable. Other environmental factors that could lead to PCM failure include thermal stress due to excessive heat and excessive vibration that causes sensitive parts to fail.

How do you test a Dodge PCM?

Water is the primary element to avoid as exposure to it can render the PCM irreparable. Other environmental factors that could lead to PCM failure include thermal stress due to excessive heat and excessive vibration that causes sensitive parts to fail.

How do you reset the TIPM on a Dodge Ram?

Many electrical functions in the TIPM turn on/off by switching ground connections. Remove the (+) battery connection on upper left of TIPM or the (-) battery connection on vehicle battery. Reinstall connection. This resets the TIPM.

How do you test for a bad TIPM?

Typical TIPM issues will look like your car has a mind of its own, the car will have difficulty starting, or won’t start, the doors may lock themselves for no reason, the car horn or alarm may go off when nothing set it off, your blinker will go on by itself etc.

What causes a TIPM to go bad?

Symptoms of a faulty fuel relay in your TIPM:

If the fuel pump relay starts failing, this cause rapid deterioration as it begins to solder, until the vehicle won’t start. The fuel pump can also get stuck in the on mode, and you will hear a buzzing coming from the rear of the vehicle where the fuel pump is located.

Why does my 5.7 Hemi tick on startup?

Fuel. Low quality fuel can cause the hemi tick. Fuels that contain high amounts of ethanol or that are low octane may not properly lubricate the fuel injectors and can lead to a slight tapping or ticking noise. Low-octane gas has also been known to cause an ignition knock in high-performance engines.

Should I worry about Hemi tick?

According to Chrysler/ Dodge, Hemi engines can develop a completely normal, harmless tick. In our experience, this can be true. We have checked out some Hemi engines with ticks in the past and have been unable to find any problems with them.

How do you diagnose a Hemi tick?

According to Chrysler/ Dodge, Hemi engines can develop a completely normal, harmless tick. In our experience, this can be true. We have checked out some Hemi engines with ticks in the past and have been unable to find any problems with them.

How do you reset the remote start on a Dodge Ram?

Resetting your Dodge Ram key fob begins in the driver’s seat. Turn the key to position II, the “run” position to begin. Let all the startup lights and chimes finish before fully turning the fob to start your truck. Hold the “unlock” button on your key fob for 10 seconds until you hear silence.

How do I enable the remote start on my Dodge Ram?

Remote Start Feature

Simply push and release the remote start button (x2 with a circle) on the key fob twice within five seconds. You’ll hear your vehicle’s engine start immediately, and it’ll continue running for 15 minutes before shutting down.

Why is my command start not working?

If your remote starter system isn’t working properly, try replacing the battery in your fob. You can find replacement key fob batteries at Batteries Plus. Most remote starter fobs run on 2032 lithium coin cell batteries. This one may seem obvious, but if your vehicle is not in “Park” your remote starter will not work.

Can dirty fuel injectors cause car not to start?

Clogged Fuel Injectors

Over time, the fuel injector nozzles can become clogged with rust, corrosion or debris. Once clogged, the fuel injectors may not add the correct amount of fuel to the cylinders, and the vehicle may not start up at all.

Will seafoam clean fuel injectors?

Pour Sea Foam in your fuel tank to clean and lubricate your entire fuel system. It works through fuel injectors and carburetors to remove harmful residues and deposits from fuel passageways, intake valves, pistons, and chamber areas.

What does a bad injector sound like?

You should hear a clicking sound as the injector is in use. If the injector lacks the clicking sound, it’s dead and in need of replacement.

How do you know if your fuel line is clogged?

What Are the Signs of a Clogged Fuel Filter?

  1. Poor Engine Performance. Under heavy or high-speed acceleration, a clogged fuel filter may cause the engine to randomly hesitate, surge or sputter. …
  2. Hard Starting. …
  3. Stalling. …
  4. Random Misfire or Rough Idle. …
  5. Fuel System Part Failures. …
  6. Check Engine Light (CEL)

How do I check my fuel filter?

If you remove the fuel filter you can check it for blockages by blowing air through it. To do this carefully attach a hose to one end of the air filter and then slowly blow through it. If there is anything more than a slight restriction it should be replaced.

Can you unclog a fuel filter?

If you’re wondering whether you should remove a fuel filter and then clean it by rinsing or blowing it out before putting it back into the system, the answer is a resounding no.

How do I know if my fuel pump fuse is blown?

#1 – You Can’t Start Your Vehicle

When you turn on the key, you should hear a click in the fuse box, if you don’t hear it and you can’t start your vehicle, you might have a faulty fuel pump relay.

What are the signs you need a new fuel pump?

5 Signs You Need to Replace Your Fuel Pump

  • Engine Stuttering. One of the clearest indications that your vehicle’s fuel pump isn’t working as it should is an engine jolts and stutters while you drive at a steady speed. …
  • Engine Surges. …
  • Reduced Fuel Efficiency. …
  • High-Pitched Noises. …
  • Engine Won’t Start.

Will a bad fuel pump throw a check engine light?

A weak fuel pump may throw off your car’s air/fuel ratio, causing the engine control module (ECM) to turn on the check engine light. In some cases, pump electrical issues may trigger the light as well.

Where is the PCM located?

The PCM is most often located in the engine bay near the fuse box or inside the car near the fuse box. It can often also be located under the front windshield behind some covers. There are a few different locations that the manufacturer can place your vehicle’s PCM, but the most common location is in the engine bay.

How do you reset the computer on a Dodge Cummins?

Disconnect the negative terminal cable from the battery with a combination wrench. Set the negative terminal cable aside and wait 20 minutes. This will drain the computer’s stored electricity and clear its memory. Reconnect the negative terminal cable to the battery.

How do you reset your RAM?

How to Make the Most of Your RAM

  1. Restart Your Computer. The first thing you can try to free up RAM is restarting your computer. …
  2. Update Your Software. …
  3. Try a Different Browser. …
  4. Clear Your Cache. …
  5. Remove Browser Extensions. …
  6. Track Memory and Clean Up Processes. …
  7. Disable Startup Programs You Don’t Need. …
  8. Stop Running Background Apps.

Is a PCM and ECU the same?

The terms PCM (Powertrain Control Module), ECU (Engine Control Unit) and ECM (Engine Control Module) can sometimes be used as interchangeable generic phrases for the same thing – a control unit for the engine/transmission system.

Is ECM and PCM the same thing?

The main difference between the two is that the ECM controls specific parts of the engine, regulating and sending commands. While the PCM is used in newer models to control almost all engine functions.

What are the symptoms of a bad PCM relay?

7 Common PCM Failure Symptoms

  • Your ‘Check Engine’ Light is On. …
  • Your Car Won’t Start or Starts Roughly. …
  • Sudden Loss of Gas Mileage. …
  • You Failed Your Emissions Test. …
  • Your Engine Stutters or Stalls. …
  • Erratic or Random Shifting. …
  • You’re Receiving a PCM-Related Error Code. …
  • What to Do If You Experience PCM Failure Symptoms.

How much does a PCM cost?

According to RepairPal, the average cost of a PCM replacement can come out anywhere between $885 and $966, although dealership prices can be as high as $1,600 in parts and labor.

How do you reset the PCM on a Dodge Ram 1500?

To reset the computer in your RAM 1500, take the following steps:

  1. Identify your battery’s negative cable.
  2. Disconnect the negative cable from the battery.
  3. Wait 20 minutes so that all systems have shut down.
  4. Reconnect the negative cable.

What does the PCM control?

The powertrain control module, aka PCM, is your vehicle’s brain. It manages the engine, transmission and other systems based on information it receives from various sensors around the vehicle.