Skip to content

Where is the egr valve on a 2010 dodge charger?

The EGR valve is located in the engine compartment (underneath the hood).

Car 2007 Dodge NitroV6-3.7L
Service Service typeExhaust Gas Recirculation/EGR Valve Replacement
Estimate Estimate$638.40
Shop/Dealer Price Shop/Dealer Price$773.25 – $1137.31

Where is the EGR control valve located?

Answer: The purpose of the EGR valve is to recirculating engine exhaust gas to the back to the engine cylinders. To accomplish this task the EGR valve is attached to the intake manifold of the engine. This location is atop of the engine near the carburetor, usually towards the back of the engine near the firewall.

How do you clean an EGR valve?

How to Clean EGR Valve?

  1. Spray cleaner in both openings of the EGR valve. …
  2. If it’s really dirty, you may need to use a pick to scrape off the bigger chunks of carbon or a wire brush.
  3. You may also need to let the cleaner sit in the valve for several hours.
  4. Don’t be afraid to use too much cleaner.

Where is the EGR valve on a 2010 Dodge Journey?

The EGR valve is located in the engine compartment (underneath the hood).

Does a 2013 Dodge Charger have a EGR valve?

True. None of the 6.1L or 6.4L engines ever had an EGR valve. After 2008 none of the 5.7L engines had an EGR valve. Catch cans have nothing to do with EGR valves.

What are the symptoms of a faulty EGR valve?

What are the symptoms of a failing EGR valve?

  • Your engine has a rough idle. …
  • Your car has poor performance. …
  • You have increased fuel consumption. …
  • Your car frequently stalls when idling. …
  • You can smell fuel. …
  • Your engine management light stays on. …
  • Your car produces more emissions. …
  • You hear knocking noises coming from the engine.

Can I replace my EGR valve myself?

In most models, replacing an exhaust gas recirculation (EGR) valve is not difficult. You can do it in your garage in about an hour or two, depending on your particular system, using some common tools and a good solvent like carburetor cleaner.

How do I unblock my EGR valve?

EGR Valve Cleaning

  1. Spray carbon deposits with EGR-valve or carburetor cleaner. …
  2. Use a dull scraper and a pipe cleaning brush to scrub carbon buildup. …
  3. To deal with rock-hard buildup, leave the valve soaking in the cleaning solution for a few minutes. …
  4. Repeat step 3 to fight stubborn carbon deposits.

How much does it cost to replace the EGR valve?

The average cost for EGR valve replacement is between $332 and $413. Labor costs are estimated between $81 and $103 while parts are priced between $251 and $311. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How do you clean an EGR valve without removing it?

How To Clean an EGR Valve Without Removing It

  1. Gather the needed cleaning supplies.
  2. Locate the EGR Valve.
  3. Gain access to the EGR Valve.
  4. Start the vehicle and rev it to 2000 RPMs.
  5. Spray half of the cleaning solution (250ml)
  6. Reinstall the EGR valve cover.
  7. Scan the vehicle for error codes.

How do you change a EGR valve on a 2010 Dodge Journey?

How To Clean an EGR Valve Without Removing It

  1. Gather the needed cleaning supplies.
  2. Locate the EGR Valve.
  3. Gain access to the EGR Valve.
  4. Start the vehicle and rev it to 2000 RPMs.
  5. Spray half of the cleaning solution (250ml)
  6. Reinstall the EGR valve cover.
  7. Scan the vehicle for error codes.

What is an EGR valve sensor?

The EGR position sensor detects the movement and position of the exhaust gas recirculation (EGR) valve pintle. The EGR pressure sensor detects exhaust gas flow through the EGR passage.

Does 2012 Hemi have EGR valve?

There is no EGR on a 2012 5.7L. It uses variable cam timing to achieve the same thing: Drawing spent exhaust gas back into the combustion chambers to cool the combustion temps, and reduce NOX emissions under the right driving conditions.

Where is the EGR valve on a 6.1 Hemi?

Locate the EGR valve. It is in the front of the engine block, located just underneath the alternator. The top of the valve looks like a brass “flying saucer” and it is connected to the engine block with four bolts.

What happens if the EGR valve is stuck open?

If the EGR valve is stuck in the open position, the vehicle will experience a rough idle or frequently stall. If the valve is not completely stuck open but never achieves a tight seal when it closes, the engine can “miss” or shudder because of the improper mixture of the combustion elements.

What happens if your EGR valve is not working?

If your EGR valve is stuck in the open position, it can allow too little or too much exhaust gas into the combustion chamber. This can throw off the air/fuel mixture inside (which needs to be perfect) and cause the engine to idle rough.

Can I drive with a faulty EGR valve?

Can I drive with a bad EGR valve? Technically, you can drive your vehicle with a bad EGR valve, but your vehicle will run rough, shake at idle, and a check engine light will be illuminated. You might also hear popping sounds while driving down the road.

Is it worth replacing EGR valve?

On older cars operated by engine vacuum, the EGR valve diaphragm can deteriorate and leak, causing a rough idle and a check engine light. In that case, the valve should be replaced. Also, over time the valve can accumulate carbon buildup and stick open, causing a rough running engine.

How do you tell if your EGR valve needs to be cleaned or replaced?

How to Tell If Your EGR Valve Is Bad. Once you have removed your EGR valve, shake it lightly. If you hear something moving back and forth inside, that’s the diaphragm—which means there is a good chance that your EGR valve is still good and just needs to be cleaned to return to normal function.

How do you reset a EGR valve?

RE: EGR VALVE RESET ? to reset the CEL just unhook your NEG from the battery for about 10 mins or more and it resets when power is hooked back up…. if there is still a problem the CEL will come back on after some time.

What damage can a faulty EGR valve cause?

One of the most significant parts of the EGR system is the EGR solenoid. A faulty EGR valve can damage the EGR solenoid which can, in turn, cause performance issues for the engine. The engine check light would turn on then, and then the engine might knock and ping.

Can I use brake cleaner to clean EGR valve?

Carb cleaner, not brake cleaner on those EGR valves. From what I understand is the brake cleaner and o-rings do not like each other. A baby food jar works great for soaking the EGR valve. You can also use the carb cleaner on the “water in fuel” sensor to clean it.

Where do you spray EGR cleaner?

Spray the product for 2 seconds into the air intake manifold but DO NOT SPRAY DIRECTLY INTO THE INTERCOOLER. After each spray, wait until the idle rpm is restored and engine runs stable. Repeat the process until all of the product has been discharged from the aerosol.