Skip to content

Where is heater control valve on my 2002 dodge grand caravan located?

The heater control valve is found in front of the firewall of the vehicle.

Where is the heater control valve located?

Heater Control Valve Location

The heater control valve is typically in line with the heater core’s inlet hose, which is often near the vehicle’s firewall, but the exact location of the valve will vary by vehicle.

How do I know if my heater control valve is working?

Pinch off the hose on the outlet side of the heater control valve (the hose closest to the firewall) and drive the vehicle at highway speeds. If the blower stops blowing hot air, you’ve found the problem. And, if the air conditioning runs colder with the hose clamped off, the valve is causing the problem.

Can a heater control valve cause no heat?

You wouldn’t want your cold AC air to pass through a hot heater core before it enters the passenger compartment, so this heater control valve regulates coolant flow into the heater core. If this valve has an issue, it can cause no heat or AC that doesn’t cool enough.

Why did my heat stop working in my 02 Dodge Caravan?

The most common reasons a Dodge Caravan heater isn’t working are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor. Search our network of RepairPal Certified shops near you to speak with a technician about your issue.

What happens if my heater control valve is bad?

A faulty heater control valve may not be able to properly control coolant flow to the heater, which may result in problems with operating the heater. The heater may produce hot air, but only at certain times, such as at idle, and the hot air may come and go.

What would happen if the heater control valve was stuck closed?

Heater Control Valve Stuck

Some vehicles use a heater control valve that only opens (allowing hot coolant to flow through the heater core) when the heater control calls for hot air. The heater will fail to produce warm air if the control valve is stuck closed, leaking or disconnected from the heater control.

How do you fix a heater control valve?

Heater Control Valve Stuck

Some vehicles use a heater control valve that only opens (allowing hot coolant to flow through the heater core) when the heater control calls for hot air. The heater will fail to produce warm air if the control valve is stuck closed, leaking or disconnected from the heater control.

How do I know if my heater core is clogged?

Five Signs Your Car’s Heater Core Is Going Bad

  1. Fog Inside Your Car. Two things could be going on if you have fog inside your car. …
  2. Sweet Smells in the Car. The sweet smell in your car might not be your perfume or the donuts you’re taking to work. …
  3. Constant Engine Coolant Loss. …
  4. Cold Air in the Cabin. …
  5. Cold Cabin/Hot Engine.

Why is my car blowing cold air when the heat is on?

Low Coolant Level

The coolant (usually a mixture of water and antifreeze) in your engine doesn’t just work to keep the engine from overheating: It’s also the source of heat supporting the heating system. If there isn’t enough coolant in your system, the heater core will blow cold air into your car.

Why would my car overheat but the heater blows cold air?

This can have a number of causes, with a faulty radiator cap being the most common. If you notice your engine is overheating, it also could be a blown head gasket, which is much more serious. Air bubbles in the cooling system can cause your heater to blow cold air, but they can do much worse if left unchecked.

Why is my furnace not blowing hot air?

The Furnace Is Blowing Cold Air

First, check to make sure the thermostat is set correctly. You will want to make sure that the fan control is set to auto, and not ‘on’. If the thermostat appears set correctly, turn off your heater at the thermostat and check the filter. If the filter is dirty, replace it.

Does the blower motor resistor control heat?

The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed.

How do I know if I need a blower motor or a resistor?

Here are some of the warning signs of a bad heater blower motor resistor: Fan does not work at all, so no air comes out of the vents. Fan only works on some speeds and not others. Fan only works on the highest speed.

What happens when blower motor goes bad?

If the blower motor is completely bad, then you’ll have no airflow at all. Strange sounds coming from blower. Blower motors can make all kinds of sounds, depending on what the issue is. Vibrations, grinding, and high pitched-noises are some of the sounds a blower can make if it’s going bad.

Can you bypass a heater control valve?

Heater control valve bypass is not standard on vehicles, it is a modification. When bypass hoses are installed, the coolant in your car will always be circulating through the heater core – that means that if the core starts leaking, you won’t be able to turn it off.

How long do heater control valves last?

How long do heater control valves last? The original heater control valve for most vehicles should last for about 100,000 miles.

How can I heat my car without a heater?

Fortunately, there are a few other budget-friendly ways to keep warm until you can take your vehicle in for heater repair.

  1. Park in the garage. …
  2. Cover the windshield. …
  3. Stock up on hand warming packets. …
  4. Buy a heater or seat cover that plugs into your car. …
  5. Keep blankets in the back seat. …
  6. Take along a warm beverage.

Where is the air door actuator located?

The blend door actuator(s) are typically located on the climate control case behind the dashboard.

What does a coolant control valve do?

Excellent coolant flow control

Coolant switch valves control the coolant flow in side-flow cooling circuits of the powertrain and in the heating circuits of passenger compartments. In hybrid and electric vehicles, they can be used for coolant flow distribution, e.g. for cooling the battery and power electronics.

Can you unclog a heater core?

To clean the blockage, you need to flush water or air through the heater core. By doing so, the grime and dirt that’s causing the clog will come out through the inlet hose. Now, insert a water hose into the outlet hose. If you have access to an air compressor, you can use that to push out the coolant and grime.

Will a radiator flush unclog heater core?

Yes, they are both cooling system components, and the same coolant travels through them. Flushing a radiator can help reduce the rust that passes through the heater core. The most effective way of unclogging a heater core is by flushing it with a garden hose.

Can you fix a heater core without replacing it?

Can I repair a leaking heater core? Fixing a leaking heater core will always be much easier than replacing one. Since it is only a small leak in the heater core, we recommend simply sealing that leak and leaving your heater core in place.