What does the lightning bolt dash light mean?
The lightning bolt warning light alerts you to a fault in the electronic throttle control system in your vehicle. This may be a faulty throttle body, the throttle body sensor or possibly the throttle body control motor which is what controls the opening and closing of the throttle body as the motor requires more fuel.
How do I fix my electronic throttle control light?
solution: stop driving your vehicle and have it towed to your mechanic. there, the first step will be to scan the engine computer for a trouble code. this should point your mechanic in the right direction. if there is no code, then a check of the sensors, relays, and wiring in the system should identify the problem.
How do you reset the red lightning bolt on a Dodge Caliber?
To reset the system all You need to do is turn on the vehicle without starting the engine. After that You can just press down on the throttle pedal for ten seconds and wait until the engine light starts to blink.
What does the lightning bolt light mean on a 2007 Dodge Caliber?
The red lightning bolt indicates that there is a problem wit the electronic throttle control unit. This may be for a specific reason or may be due to a slight glitch.
What does a lightning bolt in parentheses Dodge?
This is the Electronic Throttle Control (ETC) Indicator symbol. This light, a lightning bolt between reversed brackets or parenthesis, will illuminate if there is a problem in the electronic throttle control system.
Can you drive with electronic throttle control light on?
It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.
How much does it cost to fix electronic throttle control?
If it’s the electronic throttle controller then the replacement cost can range from $300 to $1,500 depending on the location and time to complete the job. If it’s the throttle body itself that is damaged and needs to be replaced, the costs can also be in the same neighborhood.
What causes electronic throttle control?
Some type of fault or malfunction in a sensor such as the throttle position sensor (located on the air control valve) can cause the electronic throttle control light to come on.
How much does it cost to fix a throttle control?
The average cost for throttle body replacement is between $489 and $600. Labor costs are estimated between $86 and $109 while parts are priced between $403 and $491. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
How do you reset a Dodge Caliber?
Dodge Caliber Oil Change Maintenance Service Indicator Warning Light Reset
- Close all doors. …
- Immediately Fully depress the GAS PEDAL slowly three times within 10 seconds Make sure to depress the pedal all the way down.
- Turn the ignition off and start the engine to verify the indicator has been reset.
How much is a throttle body for a Dodge Caliber?
The average cost for a Dodge Caliber throttle body replacement is between $465 and $484. Labor costs are estimated between $70 and $89 while parts are priced at $395.
What does the lightning bolt mean on a 2007 Dodge Charger?
When you see the lightning bolt symbol appear on your 2006 Dodge Charger, it’s an indication that your gas pedal and your electronic throttle control are failing to communicate. There are several factors that can cause this issue to occur, including: Failing EGR valve. Problems with intake manifold.
How do you reset the check engine light on a 2008 Dodge Caliber?
How Do You Reset The Service Light On A Dodge Caliber? Turn both the engine and key off after turning the key on/off. 3 times in 10 seconds. Start it up once and depress and release the accelerator pedal a few more times.
How much does it cost to replace throttle body?
The average throttle body replacement cost is between $250 and $650, depending on the car model and labor costs. The throttle body cost between $200 and $500, while the labor cost is around $50 and $150. The throttle body can be differently priced depending on different vehicles, models, and the manufacturing company.
Can throttle controllers damage your car?
No, throttle controllers are not bad for your car or truck. They do not directly connect with any programming modules and only manage electrical current in the gas pedal.
Where is the electronic throttle control sensor located?
A throttle position sensor (TPS) is a sensor used to monitor the air intake of an engine. The sensor is usually located on the butterfly spindle/shaft, so that it can directly monitor the position of the throttle.
Can I replace throttle body myself?
Disconnect any air or vacuum hoses from the throttle body. Remove the throttle position sensor from the throttle body. Remove the throttle body mounting screws and remove the throttle body assembly. Discard the old gasket and install a new gasket between the throttle body and manifold during installation.
How many hours does it take to replace a throttle body?
How long does a throttle body replacement take? The job usually takes around an hour for either a replacement or a cleaning.
How do you clean a throttle body without removing it?
Here is how to clean a throttle body without removing it.
- Get a clean towel and a throttle body cleaning product. …
- Get access to the throttle body. …
- Move the throttle plate to an open position. …
- Spray the throttle body cleaning product. …
- Clean the throttle body with a clean towel. …
- Reinstall the engine air intake rubber.