Skip to content

What does the lightning bolt mean on a 2007 dodge charger?

Most of these are an alert for routine maintenance, but others are an indication that something is wrong. In the case of the appearance of a lightning bolt, it means that the electronic throttle control is faulty.

What does the lightning bolt light mean on a Dodge Charger?

When you see the lightning bolt symbol appear on your 2006 Dodge Charger, it’s an indication that your gas pedal and your electronic throttle control are failing to communicate. There are several factors that can cause this issue to occur, including: Failing EGR valve. Problems with intake manifold. Failing throttle …

What does lightning bolt warning light mean?

The lightning bolt warning light alerts you to a fault in the electronic throttle control system in your vehicle. This may be a faulty throttle body, the throttle body sensor or possibly the throttle body control motor which is what controls the opening and closing of the throttle body as the motor requires more fuel.

Can you drive with electronic throttle control light on?

It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.

How do I fix my electronic throttle control light?

solution: stop driving your vehicle and have it towed to your mechanic. there, the first step will be to scan the engine computer for a trouble code. this should point your mechanic in the right direction. if there is no code, then a check of the sensors, relays, and wiring in the system should identify the problem.

What does the lightning bolt mean on a 2007 Dodge Caliber?

The red lightning bolt indicates that there is a problem wit the electronic throttle control unit. This may be for a specific reason or may be due to a slight glitch.

Why is my Dodge Charger not starting?

The most common reasons a Dodge Charger won’t start are a dead battery, an alternator problem, or failed starter.

How much does it cost to fix electronic throttle control?

If it’s the electronic throttle controller then the replacement cost can range from $300 to $1,500 depending on the location and time to complete the job. If it’s the throttle body itself that is damaged and needs to be replaced, the costs can also be in the same neighborhood.

How much does it cost to fix an electronic throttle control system?

The average cost for throttle body replacement is between $489 and $600. Labor costs are estimated between $86 and $109 while parts are priced between $403 and $491. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How much does it cost to fix throttle control?

The throttle body part will typically cost between $200 and $500, depending on the type of car that you drive. Labor costs for this kind of repair are typically relatively low, so you can expect to pay between $50 and $150 to have the part professionally installed.

Can throttle controllers damage your car?

No, throttle controllers are not bad for your car or truck. They do not directly connect with any programming modules and only manage electrical current in the gas pedal.

Where is the electronic throttle control sensor located?

A throttle position sensor (TPS) is a sensor used to monitor the air intake of an engine. The sensor is usually located on the butterfly spindle/shaft, so that it can directly monitor the position of the throttle.

What causes electronic throttle control?

Some type of fault or malfunction in a sensor such as the throttle position sensor (located on the air control valve) can cause the electronic throttle control light to come on.

How do you reset the throttle body on a 2007 Dodge Caliber?

To reset the system all You need to do is turn on the vehicle without starting the engine. After that You can just press down on the throttle pedal for ten seconds and wait until the engine light starts to blink. When that happens it is resetting the throttle body and the ECU’s memory.

How much is a throttle body for a Dodge Caliber?

The average cost for a Dodge Caliber throttle body replacement is between $465 and $484. Labor costs are estimated between $70 and $89 while parts are priced at $395.

How do you reset a 2007 Dodge Caliber?

How Do You Reset A Dodge Caliber? The ignition should begin to run (second position)… For 10 seconds, press the accelerator pedal all the way down. The ignition should be turned off before restarting.

How do you jumpstart a 2007 Dodge Charger?

How Do You Reset A Dodge Caliber? The ignition should begin to run (second position)… For 10 seconds, press the accelerator pedal all the way down. The ignition should be turned off before restarting.

How do you manually start a Dodge Charger?

SLIDE the latch to the side, then REMOVE the silver analog key that is stored inside. Use the key to UNLOCK the vehicle door. Once inside, PLACE the key fob on the START With your foot on the brake, PUSH the start button with the fob to start the vehicle.

What does red dot on Dodge Charger mean?

Vehicle Security Warning: If your vehicle security alarm is equipped, a red dot will flash when the alarm is triggered.

Can I replace throttle body myself?

Disconnect any air or vacuum hoses from the throttle body. Remove the throttle position sensor from the throttle body. Remove the throttle body mounting screws and remove the throttle body assembly. Discard the old gasket and install a new gasket between the throttle body and manifold during installation.

Is replacing a throttle expensive?

Throttle Body Replacement Cost

While the throttle body isn’t the most expensive component on your vehicle, it’s not exactly cheap either. If you do find that your vehicle needs a new throttle body, you can expect to spend anywhere between $450 and $600 on both parts and labor.

How do you clean a throttle body without removing it?

Here is how to clean a throttle body without removing it.

  1. Get a clean towel and a throttle body cleaning product. …
  2. Get access to the throttle body. …
  3. Move the throttle plate to an open position. …
  4. Spray the throttle body cleaning product. …
  5. Clean the throttle body with a clean towel. …
  6. Reinstall the engine air intake rubber.

How many hours does it take to replace a throttle body?

How long does a throttle body replacement take? The job usually takes around an hour for either a replacement or a cleaning.