Skip to content

What does red lightning bolt on dodge mean?

The lightning bolt icon on your dashboard alerts you to a problem with the electronic throttle control system in your 2014 Dodge Charger. The gas pedal is not mechanically connected to the engine.

What does red lightning bolt on dashboard mean?

The lightning bolt warning light alerts you to a fault in the electronic throttle control system in your vehicle. This may be a faulty throttle body, the throttle body sensor or possibly the throttle body control motor which is what controls the opening and closing of the throttle body as the motor requires more fuel.

What does lightning bolt on Dodge Charger mean?

When you see the lightning bolt symbol appear on your 2006 Dodge Charger, it’s an indication that your gas pedal and your electronic throttle control are failing to communicate.

Can you drive with electronic throttle control light on?

It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.

How do you fix a red lightning bolt on a dashboard?

The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Get a code reader and scan the engine for any logged codes. The light may be on for a glitch and the electronic throttle control system needs to be reset.

How much does it cost to fix electronic throttle control?

If it’s the electronic throttle controller then the replacement cost can range from $300 to $1,500 depending on the location and time to complete the job. If it’s the throttle body itself that is damaged and needs to be replaced, the costs can also be in the same neighborhood.

How much does it cost to fix an electronic throttle control system?

The average cost for throttle body replacement is between $489 and $600. Labor costs are estimated between $86 and $109 while parts are priced between $403 and $491. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How do I reset my electronic throttle light?

Resetting Your Electronic Throttle Control

  1. Step 1 – Make sure the accelerator pedal is fully released. …
  2. Step 2 – Turn the ignition on and then turn it off. …
  3. Step 3 – Turn the ignition on again for 7 seconds and then press the gas pedal five times before releasing for 5 seconds.

What causes electronic throttle control?

Some type of fault or malfunction in a sensor such as the throttle position sensor (located on the air control valve) can cause the electronic throttle control light to come on.

How do I reset my electronic throttle control?

Resetting your electronic throttle control manually can be a tricky job. First, make sure the accelerator pedal is fully released. Next, turn the ignition on and then turn it off and wait for ten seconds. During these ten seconds, be sure the throttle valve is moving by listening for a sound of operation.

Can throttle controllers damage your car?

No, throttle controllers are not bad for your car or truck. They do not directly connect with any programming modules and only manage electrical current in the gas pedal.

Can I replace throttle body myself?

Disconnect any air or vacuum hoses from the throttle body. Remove the throttle position sensor from the throttle body. Remove the throttle body mounting screws and remove the throttle body assembly. Discard the old gasket and install a new gasket between the throttle body and manifold during installation.

Is replacing a throttle expensive?

Throttle Body Replacement Cost

While the throttle body isn’t the most expensive component on your vehicle, it’s not exactly cheap either. If you do find that your vehicle needs a new throttle body, you can expect to spend anywhere between $450 and $600 on both parts and labor.

How many hours does it take to replace a throttle body?

How long does a throttle body replacement take? The job usually takes around an hour for either a replacement or a cleaning.

How do you reset the throttle position sensor on a Dodge Ram?

To reset the Dodge Ram throttle position sensor(TPS), You need to turn on the ignition without Your foot on the brake, so the engine doesn’t start. Then press the accelerator on the floor for 15 seconds. Release the accelerator. Then turn the car off and start the engine and drive.

How do I reset my throttle position sensor?

The easiest way to reset your throttle position sensor is to unhook the negative cable from your battery for up to five minutes or to remove the fuse for your engine control module.

What happens when you unplug throttle position sensor?

Can I Bypass My Throttle Position Sensor? When you disconnect the throttle position sensor, take 30 seconds to turn on your ignition and wait for the engine to start, your vehicle should start properly. TPSes can only work if the ECU realizes they’re not working and adjusts the engine’s functioning accordingly.