What does red lightning bolt on Dodge mean?
The lightning bolt icon on your dashboard alerts you to a problem with the electronic throttle control system in your 2014 Dodge Charger. The gas pedal is not mechanically connected to the engine.
How do you reset the red lightning bolt on a Dodge Caliber?
To reset the system all You need to do is turn on the vehicle without starting the engine. After that You can just press down on the throttle pedal for ten seconds and wait until the engine light starts to blink.
How do you fix a red lightning bolt on a dashboard?
The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Get a code reader and scan the engine for any logged codes. The light may be on for a glitch and the electronic throttle control system needs to be reset.
What does the red lightning bolt mean on a 2008 Dodge Caliber?
The red lightning bolt indicates that there is a problem wit the electronic throttle control unit.
Can I drive with the throttle control warning light on?
can i drive with the throttle control light on? yes, usually, but you should go straight to a repair shop. there can be many different causes for the throttle control warning light, so a proper diagnosis is key.
Can you drive with electronic throttle control light on?
It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.
How much does it cost to fix electronic throttle control?
If it’s the electronic throttle controller then the replacement cost can range from $300 to $1,500 depending on the location and time to complete the job. If it’s the throttle body itself that is damaged and needs to be replaced, the costs can also be in the same neighborhood.
How much does it cost to fix an electronic throttle control system?
The average cost for throttle body replacement is between $489 and $600. Labor costs are estimated between $86 and $109 while parts are priced between $403 and $491. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.
How do I reset my electronic throttle control?
Resetting your electronic throttle control manually can be a tricky job. First, make sure the accelerator pedal is fully released. Next, turn the ignition on and then turn it off and wait for ten seconds. During these ten seconds, be sure the throttle valve is moving by listening for a sound of operation.
What does a lightning bolt in parentheses Dodge?
This is the Electronic Throttle Control (ETC) Indicator symbol. This light, a lightning bolt between reversed brackets or parenthesis, will illuminate if there is a problem in the electronic throttle control system.
What does the lightning bolt mean?
Throughout its history as a logo and symbol, the lightning bolt has stood for speed, power, and danger—and sometimes a little fun. So now… A brief history of the lightning bolt as a symbol. Don’t blink—it’ll be over in a flash.
Where is the electronic throttle control located?
The throttle controller is located on top of the engine between the air intake and the intake manifold.
How much is a throttle body for a Dodge Caliber?
The average cost for a Dodge Caliber throttle body replacement is between $465 and $484. Labor costs are estimated between $70 and $89 while parts are priced at $395.
How do you reset the check engine light on a 2008 Dodge Caliber?
How Do You Reset The Service Light On A Dodge Caliber? Turn both the engine and key off after turning the key on/off. 3 times in 10 seconds. Start it up once and depress and release the accelerator pedal a few more times.
Where are the fuses on a 2007 Dodge Caliber?
Location. The Caliber’s fuse box is in the engine bay, directly behind the car battery and beside the air cleaner assembly. Remove the black, plastic cover from the box to expose the fuses. The relays and associated components are in the “power distribution” box on the left-front bumper fascia.
How much does it cost to replace a throttle body?
The average throttle body replacement cost is between $250 and $650, depending on the car model and labor costs. The throttle body cost between $200 and $500, while the labor cost is around $50 and $150. The throttle body can be differently priced depending on different vehicles, models, and the manufacturing company.
Can throttle controllers damage your car?
No, throttle controllers are not bad for your car or truck. They do not directly connect with any programming modules and only manage electrical current in the gas pedal.
Can I replace throttle body myself?
Disconnect any air or vacuum hoses from the throttle body. Remove the throttle position sensor from the throttle body. Remove the throttle body mounting screws and remove the throttle body assembly. Discard the old gasket and install a new gasket between the throttle body and manifold during installation.
How many hours does it take to replace a throttle body?
How long does a throttle body replacement take? The job usually takes around an hour for either a replacement or a cleaning.
What does an electronic throttle body do?
What Does an Electronic Throttle Body Do? Located between the intake manifold and the intake assembly, the throttle body controls how much air your vehicle’s engine receives based on how far you press the gas pedal. Generally, more airflow means more power.
How do you clean a throttle body without removing it?
Here is how to clean a throttle body without removing it.
- Get a clean towel and a throttle body cleaning product. …
- Get access to the throttle body. …
- Move the throttle plate to an open position. …
- Spray the throttle body cleaning product. …
- Clean the throttle body with a clean towel. …
- Reinstall the engine air intake rubber.