Skip to content

How much is a water pump for a dodge dakota?

Dodge Dakota Water Pump Replacement Cost Estimate. The average cost for a Dodge Dakota water pump replacement is between $581 and $685. Labor costs are estimated between $175 and $220 while parts are priced between $406 and $465.

What should it cost to replace a water pump?

The average water pump replacement cost is $550, with prices ranging from $461 to $638 in the US in 2020. But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314. Estimate doesn’t include fees and taxes.

How much is a water pump for a 1998 Dodge Dakota?

The more your engine needs to be disassembled to access the water pump, the higher the labor costs. Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor). Of course, shopping around to get a few quotes is your best bet to get the best deal.

How do you change a water pump on a 2008 Dodge Dakota?

The more your engine needs to be disassembled to access the water pump, the higher the labor costs. Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor). Of course, shopping around to get a few quotes is your best bet to get the best deal.

How do you change a water pump on a 1999 Dodge Dakota?

The more your engine needs to be disassembled to access the water pump, the higher the labor costs. Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor). Of course, shopping around to get a few quotes is your best bet to get the best deal.

How do I know if my water pump is broken?

Five Signs Your Water Pump Is Failing

  1. Overheating. A dead or dying water pump cannot circulate coolant through your vehicle’s engine and, as such, the engine will overheat. …
  2. Coolant Leaks. Coolant leaks from the water pump are common and a clear sign that it’s time to replace the pump. …
  3. Corroded Water Pump. …
  4. Whining Noises.

How long does it take to replace a water pump in a car?

On average, water pump replacement is a 3 hour job. You may pay less if you buy the pump yourself and give it to the mechanic to install, though use caution and make sure to buy the parts from a reputable source. Make and model of vehicle can have a significant effect on total cost.

How do you remove a water pump from a 2003 Dodge Dakota?

On average, water pump replacement is a 3 hour job. You may pay less if you buy the pump yourself and give it to the mechanic to install, though use caution and make sure to buy the parts from a reputable source. Make and model of vehicle can have a significant effect on total cost.

How much is a water pump for a Dodge Durango?

The average cost for a Dodge Durango water pump replacement is between $770 and $1,021. Labor costs are estimated between $132 and $166 while parts are priced between $638 and $854.

How do you change a serpentine belt on a 2007 Dodge Dakota?

The average cost for a Dodge Durango water pump replacement is between $770 and $1,021. Labor costs are estimated between $132 and $166 while parts are priced between $638 and $854.

How do you change a water pump on a 3.9 Dakota?

The average cost for a Dodge Durango water pump replacement is between $770 and $1,021. Labor costs are estimated between $132 and $166 while parts are priced between $638 and $854.

How do you remove the fan clutch on a Dodge Dakota?

The average cost for a Dodge Durango water pump replacement is between $770 and $1,021. Labor costs are estimated between $132 and $166 while parts are priced between $638 and $854.

Where is the thermostat on a 2004 Dodge Dakota?

The average cost for a Dodge Durango water pump replacement is between $770 and $1,021. Labor costs are estimated between $132 and $166 while parts are priced between $638 and $854.

What causes a water pump to go bad?

The most common water-pump failure is due to worn bearings. Water pumps move a tremendous amount of coolant, and they just simply wear out over time. Belt tensioners can rattle when they’re worn out. You can spin the pump by hand when the belt is loose to feel if the rotation is smooth or notchy.

How do you test a car water pump?

With the engine off, open your hood and locate the water pump pulley. With gloves on, grab it and wiggle it back and forth. There should be no movement, if there is, this along with the noise is a good indication you may have a water pump problem.

Can you drive a car with a leaking water pump?

Depending on a few factors, you can probably drive your vehicle 5-20 miles with a faulty water pump, which should be enough to get you to the nearest mechanic to replace it. A water pump is vital to a car’s cooling system. It controls how the coolant flows around the engine keeping its temperature at optimal levels.

Can I replace a water pump myself?

A specialist workshop usually estimates a good three hours of work for changing a water pump. However, if you do this work yourself, the only costs incurred are those for a new water pump. These are usually between 50 and 500 pounds.

How do I know if my truck water pump is bad?

These five signs can help you recognize that it’s time to bring your car in for inspection and possible water pump repair.

  1. Coolant Leaking. One of the first signs of a potentially faulty water pump is a puddle of coolant on the ground where you’ve parked your car. …
  2. Rust or Deposit Build-Up. …
  3. Noise. …
  4. Overheating. …
  5. Steam.

Can a water pump be repaired?

Fixing a water pump refers to the process of replacing an essential part of your vehicle’s cooling system. It is one of the least complicated procedures to carry out, as far as auto repairs go, so almost anyone who can operate a wrench can do this on their own.

How much is a water pump for a 2004 Dodge Durango?

The more your engine needs to be disassembled to access the water pump, the higher the labor costs. Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).

Are Dodge Durango reliable?

The Dodge Durango Reliability Rating is 3.5 out of 5.0, which ranks it 3rd out of 14 for fullsize SUVs. The average annual repair cost is $675 which means it has average ownership costs. The severity of repairs is average and the frequency of those issues is low, so major repairs are uncommon for the Durango.

Where is the water pump located on a 2011 Dodge Durango?

The Dodge Durango Reliability Rating is 3.5 out of 5.0, which ranks it 3rd out of 14 for fullsize SUVs. The average annual repair cost is $675 which means it has average ownership costs. The severity of repairs is average and the frequency of those issues is low, so major repairs are uncommon for the Durango.

How do you change a serpentine belt on a Dodge Dakota?

The Dodge Durango Reliability Rating is 3.5 out of 5.0, which ranks it 3rd out of 14 for fullsize SUVs. The average annual repair cost is $675 which means it has average ownership costs. The severity of repairs is average and the frequency of those issues is low, so major repairs are uncommon for the Durango.

What does the idler pulley do?

The idler pulley is a common part that’s found on the majority of the vehicles on the road. Its primary function is to provide tension and guide the engine drive belt. These belts wrap around the various parts of the engine such as the power steering pump, alternator, water pump etc…

How do you change a serpentine belt on a 2000 Dodge Durango?

The idler pulley is a common part that’s found on the majority of the vehicles on the road. Its primary function is to provide tension and guide the engine drive belt. These belts wrap around the various parts of the engine such as the power steering pump, alternator, water pump etc…

How do you take the fan off a Dodge Dakota water pump?

Set the pry bar on the water pump pulley, just behind the engine fan. Set the pry bar between two of the bolts on the pulley to hold it steady and stop it from turning. Attempt to turn the fan by hand to make sure the pry bar is holding the pump steady. Remove the hex-head bolt behind the fan using an open-end wrench.

How do you remove the clutch fan on a 1998 Dodge Dakota?

Set the pry bar on the water pump pulley, just behind the engine fan. Set the pry bar between two of the bolts on the pulley to hold it steady and stop it from turning. Attempt to turn the fan by hand to make sure the pry bar is holding the pump steady. Remove the hex-head bolt behind the fan using an open-end wrench.

How do you use a fan clutch removal tool?

Set the pry bar on the water pump pulley, just behind the engine fan. Set the pry bar between two of the bolts on the pulley to hold it steady and stop it from turning. Attempt to turn the fan by hand to make sure the pry bar is holding the pump steady. Remove the hex-head bolt behind the fan using an open-end wrench.

Why is my Dodge Dakota overheating?

The most common reasons a Dodge Dakota is overheating are a coolant leak (water pump, radiator, hose etc.), the radiator fan, or a failed thermostat.

How much is a thermostat for a Dodge Dakota?

The average cost for a Dodge Dakota thermostat replacement is between $387 and $409. Labor costs are estimated between $85 and $107 while parts are priced at $302.

How do you change a thermostat on a 2002 Dodge Dakota?

The average cost for a Dodge Dakota thermostat replacement is between $387 and $409. Labor costs are estimated between $85 and $107 while parts are priced at $302.

Will Stop leak help a water pump?

It works on plastic, aluminum, and metal radiators in heater cores, engine cooling jacket, gaskets (including head gaskets), water pumps, and freeze plugs.

How do I know if I have a bad water pump or a head gasket?

A leaking radiator, overheating, white-colored or sweet-smelling exhaust and green-tinted spark plugs are all signs the head gasket is wearing, broken or on its way to that status. When you see white smoke coming from your tailpipe, it is time to stop in at Wiygul Automotive Clinic for an inspection.

How long will a water pump last after it starts leaking?

How Long Will Water Pump Last If Leaking? Keeping them in good working order they normally last 60,000 to 90,000 miles. Some cheaper water pumps have an estimate of 30,000 miles or less. It is important that you regularly clean the coolant on your water pump if you want to keep it in good working order.

How do you know if the water pump is working?

How Long Will Water Pump Last If Leaking? Keeping them in good working order they normally last 60,000 to 90,000 miles. Some cheaper water pumps have an estimate of 30,000 miles or less. It is important that you regularly clean the coolant on your water pump if you want to keep it in good working order.

How do you temporarily fix a water pump leak?

Water Pump Leak Repair: Water Pump Removal

  1. Flush cooling system if necessary.
  2. Drain coolant.
  3. Remove engine belts.
  4. Remove other components to gain access to water pump bolts.
  5. Remove the water pump.
  6. Replace gasket or o-ring and install new pump.

How hard is it to replace a water pump?

While removing the pump is not difficult, you must have experience removing and replacing timing belts and their various components. It takes just as much work to get down to the timing belt as it does the water pump, therefore you should plan on replacing the belt at the same time.