Skip to content

How much is a water pump for a 2007 dodge nitro?

The average cost for a Dodge Nitro water pump replacement is between $461 and $573. Labor costs are estimated between $162 and $205 while parts are priced between $299 and $368.

How much should a water pump cost?

The average water pump replacement cost is $550, with prices ranging from $461 to $638 in the US in 2020. But typically depends on the type of vehicle you drive and the auto repair shop you take it to. Labor costs are between $256 and $324 while parts cost between $205 and $314. Estimate doesn’t include fees and taxes.

Why won’t my 2007 Dodge Nitro start?

The most common reasons a Dodge Nitro won’t start are a dead battery, an alternator problem, or failed starter.

What kind of engine does a 2007 Dodge Nitro have?

The standard engine offered for base and SLT Nitros is the same 3.7-liter pushrod V-6 found in the Liberty, Grand Cherokee, and Commander. That engine produces 210 horsepower at 5200 rpm and 235 pound-feet of torque at 4000 rpm.

How much coolant does a Dodge Nitro take?

Coolant Capacity 13.4 L (14.2 qt.)

Is replacing a water pump expensive?

The average water pump replacement cost is between £250 – £700 in the UK. The cost of water pump, gaskets and coolant is around £70 – £250, with the bulk of the cost being labour costs, which are around £180 – £450 (at an average hourly rate of £60 – £150 and 3 hours work).

Is it worth replacing water pump?

About Water Pump Replacement

The water pump is an essential component that keeps the coolant circulating, a critical role in ensuring that the engine maintains the proper operating temperature. Without coolant being circulated, the engine will overheat, leading to premature wear and damage.

How much is an alternator for a 2007 Dodge Nitro?

The average cost for a Dodge Nitro alternator replacement is between $473 and $646. Labor costs are estimated between $53 and $67 while parts are priced between $420 and $580.

How much is a starter for a Dodge Nitro?

Dodge Nitro Starter Replacement Cost Estimate. The average cost for a Dodge Nitro starter replacement is between $304 and $339. Labor costs are estimated between $88 and $111 while parts are priced between $216 and $228.

How do you reset the anti theft system on a Dodge Nitro?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

How long will a 2007 Dodge Nitro last?

On average, a Dodge Nitro lasts between 200,000 – 220,000 miles.

Are Dodge Nitros fast?

“On numbers alone, it holds its own in acceleration testing.” In tests, the Nitro hit 60 miles per hour in 7.7 seconds — “quicker than the last Mazda CX-7 we tested, but not quite as quick as Toyota’s RAV4,” Edmunds notes.

How much horsepower does a 2007 Dodge Nitro have?

“On numbers alone, it holds its own in acceleration testing.” In tests, the Nitro hit 60 miles per hour in 7.7 seconds — “quicker than the last Mazda CX-7 we tested, but not quite as quick as Toyota’s RAV4,” Edmunds notes.

What kind of coolant for 2007 Dodge Nitro?

Prestone 1 Gallon Yellow 50/50 Coolant/Antifreeze.

How big is the gas tank on a 2007 Dodge Nitro?

Used 2007 Dodge Nitro Specs &amp, Features

Fuel &amp, MPG
Combined MPG 18 mpg
EPA mileage est. (cty/hwy) 16/22 mpg
Fuel tank capacity 19.5 gal.
Fuel type Regular unleaded

How much oil does a 2007 Dodge Nitro take?

Capacity: With filter 5 quartsAfter refill check oil level.

What are the signs of a water pump going out?

Five Signs Your Water Pump Is Failing

  • Overheating. A dead or dying water pump cannot circulate coolant through your vehicle’s engine and, as such, the engine will overheat. …
  • Coolant Leaks. Coolant leaks from the water pump are common and a clear sign that it’s time to replace the pump. …
  • Corroded Water Pump. …
  • Whining Noises.

How long does it take to change a water pump?

On average, water pump replacement is a 3 hour job. You may pay less if you buy the pump yourself and give it to the mechanic to install, though use caution and make sure to buy the parts from a reputable source.

Can you replace a water pump yourself?

A specialist workshop usually estimates a good three hours of work for changing a water pump. However, if you do this work yourself, the only costs incurred are those for a new water pump. These are usually between 50 and 500 pounds.

Can you drive with a leaking water pump?

Depending on a few factors, you can probably drive your vehicle 5-20 miles with a faulty water pump, which should be enough to get you to the nearest mechanic to replace it. A water pump is vital to a car’s cooling system. It controls how the coolant flows around the engine keeping its temperature at optimal levels.

Should you replace thermostat when replacing water pump?

The answer is absolutely because the thermostat itself can be damaged if there is an episode of overheating and, of course, a water pump failure is often associated with overheating.

Will water pump leak if engine is off?

Yes, your water pump can leak even if your engine is off.

Parts can develop tiny cracks or holes. Hoses can be damaged, which can cause them to rupture. It’s definitely possible, but you shouldn’t start worrying about replacing any parts just yet.