Skip to content

How much is a serpentine belt for a dodge ram 1500?

The average cost for a Dodge Ram 1500 serpentine belt replacement is between $107 and $139. Labor costs are estimated between $52 and $66 while parts are priced between $55 and $73.

How often should you change serpentine belt in a Ram 1500?

Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage. Squealing noise, belt slippage, visible belt damage.

How much should it cost to replace a serpentine belt?

But what does a serpentine belt replacement cost? Of course, it depends on your make and model as well as labor costs, but in general a replacement serpentine belt costs around $70-$200 (plus taxes and fees), including around $50 for the belt and around $150 for the labor.

How many belts does a Dodge Ram 1500 have?

The Dodge Ram and similar truck models have one true serpentine belt, a multi-ribbed belt that fits into grooves on various pulleys, that Dodge suggests inspecting for wear every 15,000 miles or 12 months.

Is a serpentine belt expensive to fix?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.

How do I know if I need to replace my serpentine belt?

The easiest way to know that a new serpentine belt is needed is if you hear it squealing while the engine is running. A heavy rainstorm might cause a bit of squealing, but if there are any fluid leaks, it’s time to replace it right away.

What happens when a serpentine belt fails?

If your serpentine belt wears out, becomes damaged or contaminated, or breaks, engine accessories will not be able to spin at the proper speed, leading to decreased power to the electrical system.

How long does it take to replace a serpentine belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

Can you drive with broken serpentine belt?

Can I Continue Driving My Car If the Serpentine Belt Is Broken? Technically, yes, you can continue driving your car, but not for long. For instance, without power steering, you’re likely to get exhausted very quickly from driving.

What does a worn serpentine belt sound like?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery. If a car has a hydraulic power steering pump, the steering will become stiff.

How do you put a serpentine belt on a Dodge Ram?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery. If a car has a hydraulic power steering pump, the steering will become stiff.

How do you change a serpentine belt on a 2000 Dodge Ram 1500?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery. If a car has a hydraulic power steering pump, the steering will become stiff.

How do you change a serpentine belt on a 2008 Dodge Ram 1500?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery. If a car has a hydraulic power steering pump, the steering will become stiff.

Can I replace a serpentine belt myself?

Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.

What are the signs of a timing belt going bad?

Symptoms of a Bad or Failing Timing Belt

  • You Hear A Ticking Noise Coming From The Engine. …
  • Your Car’s Engine Won’t Turn Over. …
  • You Notice An Oil Leak Near The Motor. …
  • You Experience Exhaust Issues. …
  • Your Revs Start Acting Up.

How long can you drive without a serpentine belt?

There are a couple of factors influencing the answer to this question, but on average, your car should be able to run between 20-90 minutes with a broken serpentine belt. The engine will overheat faster without a functioning cooling system on a hot day, so your driving window is less.

Is a serpentine belt the same as a timing belt?

Timing Belt. Don’t get confused—a serpentine belt is not the same thing as a timing belt. The serpentine belt and timing belt have very different functions in your vehicle. The timing belt is located inside the engine and keeps the crankshaft and camshaft in sync.

Does Walmart replace serpentine belts?

Walmart does replace serpentine belts at some Auto Care Centers as of 2022. The price can range from $150 – $200 for replacing the serpentine belt, which includes the belt and labor. It is recommended to call your local Walmart Auto Care Center beforehand to see if the store offers this service.

Is fan belt same as serpentine belt?

Fan belts – also known as serpentine belt or accessory drive belts – take the engine’s rotation and use it to power the: engine water pump, fan, power steering pump, air conditioning compressor, alternator, supercharger and others.

What happens if belt breaks while driving?

When the timing belt breaks, the crankshaft will continue to spin at 1000 rotations per minute, while the camshaft will stop turning. As a result, the pistons will continue to rise and fall in their cylinders, but they will strike closed valves.

What happens if a fan belt breaks while driving?

A broken serpentine belt will immediately lead to a loss of power assist for the steering system. For obvious reasons, this can be detrimental if your car is in motion. A broken serpentine belt will stop the water pump from circulating antifreeze through the cooling system.

Can a serpentine belt make your check engine light come on?

A loose or worn belt will cause ticking or rattling noises, poor engine performance and overheating, usually triggering the check engine light.

Can I drive my car without a belt?

If you’re wondering whether or not you can drive your car without a serpentine belt, the answer is no. There are many dangers to driving without a serpentine belt. A car can only take out so much slack from other components before they fail and stop working altogether.

How do I test my serpentine belt?

Here are tips for inspecting belts:

  1. Look for cracks, fraying, or splits on the top cover.
  2. Look for signs of glazing on the belt’s sides. Glazed or slick belts can slip, overheat or crack.
  3. Twist a serpentine belt to look for separating layers, cracks, or missing chunks of the grooves on the underside.

How much does it cost to replace a serpentine belt and tensioner?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.

How do you put a serpentine belt on a 2010 Dodge Ram 1500?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.

How do you change the serpentine belt on a 2005 Dodge Cummins?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.

How do you put a serpentine belt on a Dodge Ram 2500?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.

How do you change a serpentine belt on a 2004 Dodge Ram 1500?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.

What is a tensioner pulley?

A tensioner pulley is a device that can be used to tighten the belt in any system of belts and pulleys. These systems typically consist of a number of wheels known as pulleys and a belt that is wound around them. In order for the belt to fit around the pulleys, some part of the system typically needs to be adjustable.

How do you change a tensioner on a 2002 Dodge Ram 1500?

A tensioner pulley is a device that can be used to tighten the belt in any system of belts and pulleys. These systems typically consist of a number of wheels known as pulleys and a belt that is wound around them. In order for the belt to fit around the pulleys, some part of the system typically needs to be adjustable.

How do you replace the idler pulley on a 2012 Dodge Ram?

A tensioner pulley is a device that can be used to tighten the belt in any system of belts and pulleys. These systems typically consist of a number of wheels known as pulleys and a belt that is wound around them. In order for the belt to fit around the pulleys, some part of the system typically needs to be adjustable.

What causes squealing serpentine belt?

A tensioner pulley is a device that can be used to tighten the belt in any system of belts and pulleys. These systems typically consist of a number of wheels known as pulleys and a belt that is wound around them. In order for the belt to fit around the pulleys, some part of the system typically needs to be adjustable.

How much does it cost to fix the timing belt?

If your timing belt is in need of replacement, you can expect that service to cost anywhere from $300 up to $500. Because the timing belt is not easily reachable on many vehicles there is a good bit of disassembly and reassembly needed to get to the belt. Economy cars with smaller engines require less labor.

Will a bad timing belt throw a code?

Will A Timing Belt Throw A Code? In the event of a broken timing belt or skipped tooth, the computer system of your vehicle may have multiple check engine light codes. The check engine light will then be illuminated by this.