Skip to content

How much is a pcm for a dodge ram 1500?

The average cost for a Dodge Ram 1500 powertrain control module replacement is between $934 and $1,042.

How much does it cost to replace a PCM?

The average cost for powertrain control module replacement is between $920 and $997. Labor costs are estimated between $75 and $94 while parts are priced between $845 and $903. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

How much does it cost to replace PCM on truck?

The PCM is a computer, and computers aren’t cheap to replace. That’s why the average PCM replacement cost is anywhere between $800 and $1,500, depending on the car model and labor costs. Even worse, this is almost all in the cost of the PCM itself. Labor typically only runs between $75 and $100.

What is PCM on Ram 1500?

A Dodge’s powertrain control module (PCM) serves as the central computer for a vehicle’s diagnostic system. The PCM analyzes sensor readings and engine functions. As soon as a component within the engine or fueling system malfunctions, the PCM issues a code and labels the problem either “trouble” or “pending.”

How do you reset a PCM on a Dodge Ram 1500?

To reset the computer in your RAM 1500, take the following steps:

  1. Identify your battery’s negative cable.
  2. Disconnect the negative cable from the battery.
  3. Wait 20 minutes so that all systems have shut down.
  4. Reconnect the negative cable.

What causes PCM to fail?

Water is the primary element to avoid as exposure to it can render the PCM irreparable. Other environmental factors that could lead to PCM failure include thermal stress due to excessive heat and excessive vibration that causes sensitive parts to fail.

How do u know if your PCM is bad?

What Are the Symptoms of a Faulty PCM?

  1. Your “check engine” light is on.
  2. Other warning lights may be on, including traction control and ABS.
  3. You lose fuel economy for no apparent reason.
  4. Your car stutters when starting, requires multiple attempts, or won’t start at all.
  5. Stuttering or stalling during idling.

How much does it cost to replace and reprogram PCM?

PCM Replacement Cost

The PCM itself will cost somewhere between $500 – $1,200 depending on your car’s make and model. Meanwhile, labor will cost another $120 to install and program the PCM. So, you can expect at least $600 for a PCM replacement.

How long does it take to fix a PCM?

The process takes around about half an hour, but keep in mind that most auto-electricians charge you for at least one hour of work. PCM reprogramming is also one of the few times we’ll recommend a dealership over an independent mechanic.

Can you repair a PCM?

Typically, PCMs are not rebuilt in the same way that alternators and water pumps because there are no mechanical parts that wear out. Remanufacturing a PCM generally means testing the computer, isolating and repairing any faults that may be found, then retesting the computer to make sure everything works correctly.

How do you reset a PCM on a Dodge?

Dodge technicians often debate as to when and if you even need to reset the PCM.

  1. Open the hood of the Durango.
  2. Locate the battery and remove the black-wired negative terminal from the battery.
  3. Turn the ignition key to the “on/crank” position for 30 seconds, then replace the ignition key to the “off” position.

How do you test a Dodge PCM?

Dodge technicians often debate as to when and if you even need to reset the PCM.

  1. Open the hood of the Durango.
  2. Locate the battery and remove the black-wired negative terminal from the battery.
  3. Turn the ignition key to the “on/crank” position for 30 seconds, then replace the ignition key to the “off” position.

What does a PCM do on a Dodge Ram?

The PCM–or powertrain control module–in a Dodge is responsible for controlling many of the electrical systems in the vehicle. This includes airflow to the engine, temperature and more.

How do you turn off the check engine light on a Dodge RAM 1500?

How To Reset the Check Engine Light on a RAM 1500

  1. Find your battery under the hood and disconnect the black/negative cable.
  2. Wait 20 minutes for the power reserve to expire. The RAM 1500 check engine light should reset automatically during this time.
  3. Now, just reconnect the black/negative cable.

How do I reset my Dodge computer?

Disconnect the negative terminal cable from the battery with a combination wrench. Set the negative terminal cable aside and wait 20 minutes. This will drain the computer’s stored electricity and clear its memory. Reconnect the negative terminal cable to the battery.

What does no bus mean on a Dodge Ram?

“No bus” is your ECM telling that one of the other computers onboard doesn’t wanna talk to the ECM. This is “usually” a wiring/connector problem. Check you wiring/connections, especially under the drivers side kick panel.

What is a PCM on a truck?

The powertrain control module, aka PCM, is your vehicle’s brain. It manages the engine, transmission and other systems based on information it receives from various sensors around the vehicle.

Is a PCM and ECU the same?

The terms PCM (Powertrain Control Module), ECU (Engine Control Unit) and ECM (Engine Control Module) can sometimes be used as interchangeable generic phrases for the same thing – a control unit for the engine/transmission system.

Is ECM and PCM the same thing?

The main difference between the two is that the ECM controls specific parts of the engine, regulating and sending commands. While the PCM is used in newer models to control almost all engine functions.

Can I program a PCM myself?

PCMs are built with microchips that can be reprogrammed electronically without being removed from the vehicle. Reflashing is a process where you electronically transfer approved files from a vehicle manufacturer’s website using a diagnostic connector. This process has many names.

Is the PCM the engine computer?

The PCM (Powertrain Control Module) is the main computer in the automobile that controls all its functions. By placing control of both the transmission and engine into one unit, the PCM can better coordinate their functions for better power delivery and fuel economy.

How much does it cost to fix a powertrain malfunction?

Powertrain failures are among the most expensive repair bills in the auto industry. Depending on the vehicle, transmission repairs can cost about $2,000, with the engine alone costing $3,000 or more.

How do you reset your RAM?

How to Make the Most of Your RAM

  1. Restart Your Computer. The first thing you can try to free up RAM is restarting your computer. …
  2. Update Your Software. …
  3. Try a Different Browser. …
  4. Clear Your Cache. …
  5. Remove Browser Extensions. …
  6. Track Memory and Clean Up Processes. …
  7. Disable Startup Programs You Don’t Need. …
  8. Stop Running Background Apps.

What do I need to flash a PCM?

Reflashing PCMs requires three things: a scan tool or J2534 pass-through device that is flash capable, a Windows laptop computer (Most require Windows 7 but some older applications may require Windows XP) with an internet connection for downloading the flash software from the vehicle manufacturer website (Click Here …

How do I reset my 2011 Dodge Ram 1500?

Reflashing PCMs requires three things: a scan tool or J2534 pass-through device that is flash capable, a Windows laptop computer (Most require Windows 7 but some older applications may require Windows XP) with an internet connection for downloading the flash software from the vehicle manufacturer website (Click Here …

Does a new PCM need to be programmed?

Reprogramming is usually required after installing an aftermarket performance cam, bigger cylinder heads, a different intake manifold or fuel induction system to compensate for changes in airflow.

Can the PCM cause transmission problems?

Erratic or Random Shifting

A failed PCM or TCM can cause the car to get stuck in gear, which can be a serious safety issue. It can also lead to costly transmission damage.

What all does the PCM control?

The PCM controls ignition timing, fuel delivery, valve timing in engines with Variable Valve Timing), emissions functions, turbo boost pressure in turbocharged engines, idle speed, throttle position and cruise control.

What is the most common reason for check engine light?

Replacing a faulty oxygen sensor — a sensor used to optimize a vehicle’s fuel-to-air mixture to increase gas mileage and reduce emissions — is the most common cause for a check engine light.

Why is my check engine light on RAM 1500?

Ram 1500 Check Engine Light Flashing

Other common reasons for a Check Engine Light are dirty mass airflow sensor, a malfunction with the fuel injection system, faulty emissions control part, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name a few.

Will a check engine light reset itself?

Your car’s check engine light will reset itself after you repair the problem in most car models. But it may take some time. A car usually needs 10-20 successful cycles before it will reset the check engine light by itself.

Can a PCM be reset?

When the PCM (Powertrain Control Module) is not working properly, the vehicle will have problems such as warning lights displaying on the dashboard or even stalling and sputtering. Resetting the PCM on your vehicle will help to clear all codes from it after a problem is fixed.

What Will resetting my ECU do?

“Resetting the ECU” is the process of clearing all the long term memory from the ECU’s memory. These variables trim idle speed, fuel, spark, and more. The ECU will also store trouble codes for diagnostic capability.

How do I reset my Dodge Ram TIPM?

How To Perform a TIPM Hard Reset

  1. Remove ignition key.
  2. Remove the negative cable from the battery.
  3. Remove the positive cable from the battery.
  4. Keeping cables completely clear of the battery, hold both the positive and negative cables together for 10 minutes.

What does it mean when a car says no bus?

If You see a no bus error message on the instrument cluster in Your Dodge Dakota that means that Your gauge cluster has lost communication with the ECU. The ECU communicates with instrument cluster via a system that is called CAN BUS.

What does no bus mean 2002 Dodge Ram 2500?

“No BUS” message displayed on odometer. System: Body/Chassis Electrical, Emissions/PCM/Fuel, Engine Electrical. Codes: N/A. Problem 1 of 2: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Crankshaft Position (CKP) Sensor.

What does no bus mean on a Dodge Charger?

3,319 Posts. #2 · Feb 17, 2021. In most cases where the electronics in the car start to go crazy it’s the car’s main battery. The “no bus” message refers to the CAN Buses in the car that the control modules use to send/receive messages.