Skip to content

How much is a ball joint for a dodge ram 1500?

The average cost for a Dodge Ram 1500 suspension ball joint replacement is between $349 and $435. Labor costs are estimated between $188 and $238 while parts are priced between $161 and $198.

How many ball joints does a Dodge Ram have?

Most trucks have four ball joints, with the lower ones being load-carrying while the upper ones act as a second pivot point for the steering knuckle.

How much should it cost to replace ball joint?

You might be surprised to learn that replacing a ball joint is not overly expensive. You can expect to pay around $300 in most cases, including both parts and labor. Most ball joints cost about $100 to $150, while the labor costs will run you $150 to $200.

How do I check my RAM ball joints?

Step 1 – Safely raise and support the vehicle. Step 2 – Attach dial indicator. Rest dial on either the front or back of the steering knuckle. Put dial as close to the upper ball joint as possible.

How much does it cost to replace all 4 ball joints?

To replace one or two ball joints, CostHelper readers report paying $260-$1,450, for an average of $522. To replace four ball joints, CostHelper readers report paying $360-$2,000, with an average price of $677.

How long does it take to replace ball joints?

The ball joint is a small part of your car, and the part itself is only going to cost between $20-$150 or more, depending on where you get it from and what kind of vehicle you own. It can take a little over an hour to get it replaced, so the full ball joint replacement cost will be between $100 and $400.

How long do ball joints last on a truck?

How Long Do Ball Joints Last and When Should They Be Replaced? Ball joints can last 70,000 to 150,000 miles or more.

Can you replace a ball joint yourself?

Recognizable for a knocking sound in the wheel well as you execute a turn, fixing old ball joints is an important part of keeping your vehicle road-safe. You can do it yourself for the price of the parts and the right approach.

Can you replace just one ball joint?

If a customer needs a new ball joint, recommend replacing all of the joints at the same time. If one joint has failed, chances are the other joints may be nearing the end of their service life, too.

Do you need an alignment after replacing ball joints?

There’s no denying that it’s very important to replace your ball joints when needed. However, it’s worth noting that doing that doesn’t necessarily mean you need an alignment. The only time you need one after replacing the ball joints is if the previous alignment was performed when ball joints were not in good shape.

What happens if ball joint fails?

A broken ball joint may be the cause of a mysterious clunking noise or drifting steering. And once they’re worn, they will seriously affect your steering and suspension. If a ball joint fails completely, it can even result in the wheel dramatically falling off the car.

How do I know if my ball joints are worn out?

How to check your ball joints when driving

  1. Take your car out for a drive. …
  2. Drive over speed bumps. …
  3. Turn the steering wheel. …
  4. Check your tyre wear. …
  5. Loosen the lug nuts. …
  6. Jack up the car and place wheel chocks behind the wheels. …
  7. Rock the tyre on its axis. …
  8. Remove the wheel.

How much are ball joints for a truck?

In general, ball joints are inexpensive with a range between $20 to $80 each. Labor will vary greatly by model. Some vehicles cost as low as $60 to $80. Yet others, especially four-wheel drive trucks, can range from $160 to $200 per ball joint.

How much does it cost to replace ball joints and tie rods?

The average cost for tie rod replacement is between $149 and $210. Labor costs are estimated between $50 and $63 while parts are priced between $99 and $148. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

Do I need to replace upper and lower ball joints?

Do ball joints have to be replaced in pairs? No, it’s not necessary, however, often when one ball joint is bad the other could be worn out too. In pickup trucks with double-arm front suspension, the upper and lower ball joints on one side are often replaced at the same time if the labor overlaps.

Should you replace upper and lower ball joints together?

Many technicians recommend replacing both joints at the same time (both lowers, both uppers or all four). Another item that should be checked when ball joints are replaced is the stud hole in the steering knuckle — especially if the ball joint stud has broken or is loose.

Should I replace ball joint or control arm?

In order to know if just the ball joint or the whole complete lower control arm needs replaced, the lower ball joint will need to be disconnected from the steering knuckle and checked to see if it fits tight in the lower control arm. If it is loose, then replace control arm.

Can ball joints last forever?

While ball joints may last 70,000 miles or more, they don’t last forever. Their actual lifespan will depend on your driving habits, road conditions and exposure to road splash and salt.

What causes broken ball joints?

The underside of your vehicle is exposed to everything. Dirt, grime, oil, salt, and anything else on the road can make its way into the ball joint and lead to a loss of lubrication. Ball joints can also rust and deteriorate, which will cause unintended movement and looseness.

Can you hammer in a ball joint?

Why You Should Lose the Hammer

If you use a hammer on the bottom of the ball joint to knock it into place it can cause a ripple effect of damage. The lamination on the ball joint can deform or mushroom into the knuckle.

Do rear tires have ball joints?

Irregular tire wear

Rear ball joints are essentially the main rear pivot point between the wheel and the suspension, and are very important to the vehicle’s overall ride and handling characteristics. When they fail, they can cause problems and place additional stress on other suspension joints and components.

Is a ball joint the same as a CV joint?

CV joints essentially are a complex ball and socket joint. All front-wheel-drive cars have CV joints on both ends of the axle shafts. The outside CV joints connect the drive shaft to the wheels, while the inside joints connect the driveshafts to the transmission.

How do you replace ball joints?

CV joints essentially are a complex ball and socket joint. All front-wheel-drive cars have CV joints on both ends of the axle shafts. The outside CV joints connect the drive shaft to the wheels, while the inside joints connect the driveshafts to the transmission.

Can you drive with a loose ball joint?

short answer is… it depends on how bad they are. the lower ball joint typically gets more wear than the upper. i’d say, if there’s just a little wiggle in either joint, you should have no problem driving 500 miles. they start to clunk when they’re really bad.

How much does it cost to replace control arms and ball joints?

The average cost for control arm replacement is between $611 and $734. Labor costs are estimated between $158 and $199 while parts are priced between $453 and $535. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.