Skip to content

How much does a throttle body cost for a 2007 dodge caliber?

The average cost for a Dodge Caliber throttle body replacement is between $465 and $484. Labor costs are estimated between $70 and $89 while parts are priced at $395.

What happens when throttle body goes bad?

When a throttle body is not functioning correctly, you’ll usually notice a distinctly poor or very low idle. If the problem is really severe, you might even begin stalling when coming to a stop or when the throttle is quickly pressed.

How do you reset the throttle body on a 2007 Dodge Caliber?

To reset the system all You need to do is turn on the vehicle without starting the engine. After that You can just press down on the throttle pedal for ten seconds and wait until the engine light starts to blink. When that happens it is resetting the throttle body and the ECU’s memory.

How much does it cost to replace throttle body?

The average throttle body replacement cost is between $250 and $650, depending on the car model and labor costs. The throttle body cost between $200 and $500, while the labor cost is around $50 and $150. The throttle body can be differently priced depending on different vehicles, models, and the manufacturing company.

What are the symptoms of a bad electronic throttle body?

7 Symptoms of a Bad or Failing Throttle Body

  • Lack of Power. …
  • Issues while accelerating. …
  • Higher or Lower Idling. …
  • Dirt or Grime Build-up. …
  • Poor Mileage. …
  • Electrical Problems. …
  • Check Engine Light.

Can I drive with a bad throttle body?

You might be wondering—is it safe to drive with a bad throttle body? The quick answer is no. Once it starts to show signs of going bad or being clogged, you should address the problem right away. Otherwise the vehicle may stall or fail to accelerate, creating a safety hazard.

How many hours does it take to replace a throttle body?

How long does a throttle body replacement take? The job usually takes around an hour for either a replacement or a cleaning.

How much is a throttle body for a Dodge Caliber?

The average cost for a Dodge Caliber throttle body replacement is between $465 and $484. Labor costs are estimated between $70 and $89 while parts are priced at $395.

Does a new throttle body need to be reprogrammed?

Yes, a new throttle body needs reprogramming so that it adapts to its new vehicle. Some vehicles automatically reprogram the throttle body when their installation ends. First, the mechanic must install the throttle body. Then turn on the engine for several minutes to idle.

What does the lightning bolt mean on a 2007 Dodge Caliber?

The red lightning bolt indicates that there is a problem wit the electronic throttle control unit. This may be for a specific reason or may be due to a slight glitch.

Can throttle body cause transmission problems?

The Throttle Position sensor measures the throttle position, which is controlled by the gas pedal. It is used to determine engine load and if it fails it can cause automatic transmission shifting problems.

What causes throttle body problems?

One of the main causes of a malfunctioning throttle body is internal contamination. Due to the contamination accumulated in the throttle body, the throttle valve can no longer move properly, causing problems with the control of the air supply.

Why would a throttle body need to be replaced?

The throttle body plays a large role in controlling the fuel and air mixture in your engine. The proper mixture needs to be achieved in order for your engine to run smoothly and properly. Once this part fails, it needs replacing rather than repairing.

How do you diagnose a bad throttle body?

  1. An unexplainable bucking and jerking in the vehicle.
  2. Sudden idle surges.
  3. Sudden engine stalling without any apparent reason.
  4. Hesitation while accelerating.
  5. Sudden surges in speed while driving on the highway.
  6. Intermittently flashing of check engine light for no apparent reason.
  7. Difficulties in changing gears.

How much does a throttle body cleaning cost?

RepairPal.com suggests that a throttle body cleaning costs between $226 and $290. What’s interesting to note is the price of parts: $6 to $12, the low estimate of which is about twice the cost of a can of CRC Throttle Body Cleaner at your average auto parts store.

How much does it cost to fix electronic throttle control?

If it’s the electronic throttle controller then the replacement cost can range from $300 to $1,500 depending on the location and time to complete the job. If it’s the throttle body itself that is damaged and needs to be replaced, the costs can also be in the same neighborhood.

Does a throttle body need a gasket?

The throttle body gasket is gasket made of paper or aluminum that is sandwiched between the throttle body and the intake manifold. Its purpose is to provide an air tight seal between these components so that incoming air can not bypass the throttle body. This gasket is often replaced during a throttle body service.

What is the throttle body?

The throttle body is an important part of your air intake system that controls the air flowing into your engine. It’s located between your air intake and engine manifold where fresh air is pulled into the engine for the combustion process.

How much is a throttle body for a 2012 Dodge Caliber?

The throttle body is an important part of your air intake system that controls the air flowing into your engine. It’s located between your air intake and engine manifold where fresh air is pulled into the engine for the combustion process.

How do you clean a throttle body without removing it?

Here is how to clean a throttle body without removing it.

  1. Get a clean towel and a throttle body cleaning product. …
  2. Get access to the throttle body. …
  3. Move the throttle plate to an open position. …
  4. Spray the throttle body cleaning product. …
  5. Clean the throttle body with a clean towel. …
  6. Reinstall the engine air intake rubber.

How do I reset my throttle body?

Leave the key off for a moment, turn the key to the “On” position again, wait 3 seconds, and press the accelerator 5 times in 5 seconds. Wait 7 seconds, and hold the accelerator down. The check engine light should start blinking, continue to hold pedal down until it stops blinking. You can then start the car.

How do you reset throttle body after replacing?

How Do You Reset Throttle Body After Replacing? In a moment, hold the key to the “On” position again, wait another 3 seconds, and repeatedly press the accelerator. Hold the accelerator steady for 7 seconds.