Skip to content

How much does a starter cost for a 2007 dodge caliber?

We currently carry 7 Starter products to choose from for your 2007 Dodge Caliber, and our inventory prices range from as little as $95.22 up to $226.99.

How much is a starter for a 07 Dodge Caliber?

The average cost for a Dodge Caliber starter replacement is between $273 and $463. Labor costs are estimated between $100 and $127 while parts are priced between $173 and $337.

What is the common problems with Dodge Caliber 2007?

These problems are an alternator failure, pulley noises, and power loss. Many electrical problems were reported regarding the 2007 Dodge Caliber. The owners of the 2007 Dodge Caliber reported that their car’s alternator failed despite the good maintenance.

How much should a starter cost?

A new starter may cost between $80 and $350, but you should also factor in labor costs which may cost between $150 to $1,000. For most vehicles, the complete starter replacement cost is around $500. It sounds like your mechanic is charging you the average fee for this service.

How do you remove a starter from a 2007 Dodge Caliber?

A new starter may cost between $80 and $350, but you should also factor in labor costs which may cost between $150 to $1,000. For most vehicles, the complete starter replacement cost is around $500. It sounds like your mechanic is charging you the average fee for this service.

Why won’t my 2007 Dodge Caliber start?

The most common reasons a Dodge Caliber won’t start are a dead battery, an alternator problem, or failed starter.

How much is a starter for a 2008 Dodge Caliber?

2008 Dodge Caliber Starter – from $99.99+ | AutoZone.com.

How many miles will a 2007 Dodge Caliber last?

On average, a Dodge Caliber lasts between 180,000 – 200,000 miles. A Dodge Caliber needs to go to the garage for unscheduled repairs about 0.24 times per year with an 11% change of the severe problem.

What can go wrong with a Dodge Caliber?

Some owners have reported several issues with their vehicles, including faulty transmission systems, engine problems, bad suspension components, and water leaks. Newer Caliber models have updated interiors and decent cargo space, which add a bit of a comfort and utility.

Is there any recalls on a 2007 Dodge Caliber?

Summary: CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.

How do I know if my starter is bad?

Still, look for these seven symptoms that your starter is going bad.

  1. #1: Engine Won’t Turn Over. …
  2. #2: Noise – Clicking, Grinding, or Whirring. …
  3. #3: Intermittent Issues Starting the Vehicle. …
  4. #4: Starter Stays On After Starting. …
  5. #5: Smoke. …
  6. #6: Starter Engages But Motor Won’t Start. …
  7. #7: Battery.

Is replacing a starter expensive?

A brand new starter could cost you around $50 – $350, while labor costs from a qualified mechanic could range between $150 – $1,100. In total, replacing a bad starter motor could amount to between $200 – $1450.

How long does a starter take to replace?

How long does it take to replace a starter motor? Depending on the type of vehicle, typically a starter motor replacement will take a mechanic between 2 and 4 hours to complete from start to finish.

Where is the alternator on a 2007 Dodge Caliber?

How long does it take to replace a starter motor? Depending on the type of vehicle, typically a starter motor replacement will take a mechanic between 2 and 4 hours to complete from start to finish.

How do you replace a starter in a 2009 Dodge Caliber?

How long does it take to replace a starter motor? Depending on the type of vehicle, typically a starter motor replacement will take a mechanic between 2 and 4 hours to complete from start to finish.

How do I reset my 2007 Dodge Caliber?

How to Reset Oil Life: Dodge Caliber 2007-2012

  1. 1-Turn the ignition to run (second position) Add Tip Ask Question Comment Download.
  2. 2-Press the accelerator pedal all the way down three times within 10 sec. …
  3. 3-Turn ignition OFF. …
  4. 4-Then turn the ignition to RUN or start the engine to verify if the oil life has been reset.

Where is the ignition fuse on a 2007 Dodge Caliber?

Fuse box location

The Integrated Power Module (fuse box) is located in the engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini fuses.

How do you reset the anti theft system on a Dodge Caliber?

Dodge Caliber Vehicles With This Problem. I had this problem and can easily be fixed by locating the ingnition fuse, pulling it out and putting it right back in. This resets the anti theft ignition lock which is sometimes sensitive to static electricity.

How do you change a starter on a 2008 Dodge Caliber?

Dodge Caliber Vehicles With This Problem. I had this problem and can easily be fixed by locating the ingnition fuse, pulling it out and putting it right back in. This resets the anti theft ignition lock which is sometimes sensitive to static electricity.

Is Dodge Caliber expensive to maintain?

The annual maintenance cost of a Dodge Caliber is $501. Repair and maintenance costs vary depending on age, mileage, location and shop.

How fast is a Dodge Caliber?

It’s a front-wheel drive front-engined 5-door compact hatchback with 5 seats. With 154 hp, the naturally aspirated 2 Liter 16v Inline 4 gasoline engine accelerates this Caliber 2.0 to 62 mph in 11.2 seconds and on to a maximum speed of 116 mph.

Did they stop making the Dodge Caliber?

Discontinuation. The 2010 Caliber was the last model sold in Europe. The 2011 model ended production on 23 November 2011, in United States, with the remainder being sold as the 2012 model year Caliber in both U.S. and Canada.

What kind of engine is in a 2007 Dodge Caliber?

The 2007 Dodge Caliber offers a choice of three four-cylinder engines, a 1.8-liter rated at 148 horsepower, a 158-hp 2.0-liter, and a 165-hp 2.4-liter. The first two are available with a five-speed manual or an automatic Continuously Variable Transmission.

Do Dodge Calibers have transmission problems?

Dodge Caliber transmission problems can present themselves as shifting delays, jumping or grinding during acceleration, the car shaking on the road, or whistling noises or a burning smell coming from beneath the hood.

What causes a Dodge Caliber to stall?

Clogged or restricted EGR Valve: If your EGR valve is clogged, dirty, or defective it can cause your car to stall, idle erratically, or sputter, depending on whether it is stuck open or closed.