Skip to content

Does a dodge stratus have shocks or struts?

The average cost for a Dodge Stratus suspension shock or strut replacement is between $329 and $360. Labor costs are estimated between $119 and $150 while parts are priced at $211. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How do I know if it’s my shocks or struts?

Both shocks and suspensions will be located near the tires. Shocks will be vertical and resemble a pneumatic pump. Struts are horizontal and look to be just extensions of the wheels.

Does a 2004 Dodge Stratus have shocks or struts?

Your 2004 Dodge Stratus might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Rear Shock/Strut product you desperately need.

Does my car need shocks or struts?

If your driving frequently is over bumpy, rough roads that put more stress on the shock absorbers and front struts, then you will probably need to new shocks and struts for your vehicle more often than if you drive mainly on smooth pavement. Carrying heavy loads also will wear out shocks faster.

Do car’s have both shocks and struts?

They’re not. Every wheel on your vehicle has either a shock or a strut – never both, never neither. However, you may have struts on your front wheels and shocks on your rear wheels.

Are struts in the front or back?

Struts are typically installed in conjunction with the front wheels, but depending on a vehicle’s setup and driveline, they can also be mounted at the rear wheels. Just as there are different types of cars, there are different types of struts.

How do you change the front struts on a 2001 Chrysler Sebring?

Struts are typically installed in conjunction with the front wheels, but depending on a vehicle’s setup and driveline, they can also be mounted at the rear wheels. Just as there are different types of cars, there are different types of struts.

What are the signs of a bad strut?

The Warning Signs Of Worn Shocks And Struts

  • Instability at highway speeds. …
  • Vehicle “tips” to one side in turns. …
  • The front end dives more than expected during hard braking. …
  • Rear-end squat during acceleration. …
  • Tires bouncing excessively. …
  • Unusual tire wear. …
  • Leaking fluid on the exterior of shocks or struts.

What happens if you don’t replace struts?

Reduced braking efficiency – Worn shocks and struts can have an adverse effect on the performance of your brakes. Your vehicle’s stopping distance may increase, which can be critical in an emergency braking situation. You’re also at increased risk of skidding on wet roads.

What do worn out shocks feel like?

Worn shocks and struts aren’t able to effectively absorb road impacts and soften the bump. Vehicle rolls or sways when cornering – Feeling like your vehicle is swaying or rolling when making a turn is not only annoying, it is unsettling because you can feel like you aren’t in control of your car.

Do you really need to replace shocks and struts?

Struts don’t need to be replaced unless your vehicle is bouncing like it’s on a pogo stick or bottoms out in potholes and over railroad tracks — or unless a mechanic finds that they’re leaking fluid or have been damaged. In some climates, they can also rust.

How do you check struts on a car?

Performing a road test is the only way to test shocks and struts

  1. Start by checking tire pressure and tire condition. …
  2. Check the condition of steering components. …
  3. Check the condition of the suspension components line control arm bushings, sway bar bushings and sway bar end links.

How do you change the rear struts on a Chrysler Sebring?

Performing a road test is the only way to test shocks and struts

  1. Start by checking tire pressure and tire condition. …
  2. Check the condition of steering components. …
  3. Check the condition of the suspension components line control arm bushings, sway bar bushings and sway bar end links.

How do you change the rear struts on a 2001 Chrysler Sebring?

Performing a road test is the only way to test shocks and struts

  1. Start by checking tire pressure and tire condition. …
  2. Check the condition of steering components. …
  3. Check the condition of the suspension components line control arm bushings, sway bar bushings and sway bar end links.

What noise does a bad strut make?

Noises coming from a failing strut mount have been described as clunking, knocking, creaking, and grinding. These are usually more obvious when hitting potholes or speed bumps, driving on rough ground, or driving at low speeds while turning the wheels all the way to the stops.

What is the difference between a shock and strut?

However, shocks and struts are two distinct parts with different functions. While both can help with your vehicle’s ride and handling, these parts work in different ways. Shocks are individual components of the suspension system while struts are a major structural component of the chassis and suspension system.

What does it sound like when you have a bad strut?

Bad strut sounds are usually described as a hollow clunking or banging type of sound. You’ll typically hear the noise when the vehicle is traveling over irregularities in the road. Most front strut assemblies also have a bearing at the top.