Where is the thermostat located on a 2012 Dodge Journey?
How to add another thermostat to your HVAC system
- Prepare the duct system and damper. To utilize the zone-effect an extra thermostat can provide, the air ducts in your house have to be altered and a damper inserted in the applicable place. …
- Wiring of the second thermostat. …
- Add the second thermostat to the HVAC system.
Where is the thermostat located in a Dodge Journey?
How to add another thermostat to your HVAC system
- Prepare the duct system and damper. To utilize the zone-effect an extra thermostat can provide, the air ducts in your house have to be altered and a damper inserted in the applicable place. …
- Wiring of the second thermostat. …
- Add the second thermostat to the HVAC system.
Why is my 2012 Dodge Journey overheating?
The most common reasons a Dodge Journey is overheating are a coolant leak (water pump, radiator, hose etc.), the radiator fan, or a failed thermostat.
Where is thermostat located in a Dodge Journey 2009?
The 2009 Dodge Journey 3.5 thermostat is located inside the coolant line connecting the water pump to the radiator. The function of the thermostat is to allow the car achieve the optimum running temperature in the shortest time possible.
How do you change a thermostat on a 2012 Dodge Journey?
The 2009 Dodge Journey 3.5 thermostat is located inside the coolant line connecting the water pump to the radiator. The function of the thermostat is to allow the car achieve the optimum running temperature in the shortest time possible.
What kind of antifreeze for 2012 Dodge Journey?
Notes: Dex-Cool Full Strength Concentrate. Must add distilled water.
How is P0128 diagnosed?
The most common cause for P0128 is the engine coolant thermostat is stuck open. A simple way to diagnose this is to feel the radiator hose and monitor how hot the temperature of the coolant is when it starts flowing through the radiator hose.
Where is the thermostat on a 2012 Dodge Avenger?
On the 2012 dodge avenger the thermostat is located under the housing near the water pump on the cylinder head.
How do you change a thermostat in a Dodge Journey 2014?
On the 2012 dodge avenger the thermostat is located under the housing near the water pump on the cylinder head.
What temperature should a Dodge Journey run at?
For most cars, the normal operating engine temperature is in a range of 195 to 220 degrees Fahrenheit, though most dashboard temperature gauges don’t show an exact temperature. Instead, there are typically markings for cold and hot on the edges of the gauge and a normal range in the middle.
Why is my 2011 Dodge Journey overheating?
Overheating can be caused by a number of things such as low coolant levels, a faulty thermostat, a clogged radiator or a failing coolant fan switch. As you may know the coolant fan switch helps to maintain the proper coolant temperature by turning on and off at specific temperature thresholds.
Why is my 2014 Dodge Journey overheating?
Common causes of overheating include a water pump that has failed, thermostat failure, leaking coolant lines, obstruction in the heater core or a coolant fan failure.
How long can you drive with a P0128 code?
Is it safe to drive with a P0128 code? Yes, driving with a P0128 code is safe if your car doesn’t have any other internal problems. But you should not go more than 1600 kilometers. Replace the damaged parts before exceeding 1600 kilometers.
What kind of coolant does a 2011 Dodge journey take?
Zerex 1 Gallon Orange 50/50 Coolant/Antifreeze.
How much antifreeze does a 2012 Dodge journey take?
Peak 1 Gallon Yellow 50/50 Coolant/Antifreeze.
How do you put coolant in a Dodge Journey?
How to Add Coolant: Dodge Journey (2009-2019) SXT 3.5L V6
- Find Reservoir – Locate the coolant reservoir and clean it.
- Check Level – Determine the coolant level.
- Add Coolant – Determine coolant type and add fluid properly.
- Replace Cap – Secure the coolant reservoir cap.
What kind of antifreeze does a Dodge journey take?
Prestone – DEX-COOL 50/50 Antifreeze / Coolant – Gallon (Part No. AF850) Prestone DEX-COOL antifreeze+coolant – Ready To Use (50/50 Prediluted) is specially designed to work with All GM® vehicles 1995 &, newer (GM approved), most Ford® vehicles 2011 – 2018 and most Chrysler® vehicles 2013 &, newer.
What is a po128?
The P0128 code means that the engine coolant is not getting warm enough, fast enough. In other words, there is a problem with the engine operating temperature not being reached within a certain amount of time. The Engine Control Module (ECM) determines this length of time based on ambient temperature.
Can low coolant cause P0128?
Low engine coolant can alter the engine running temperature enough to signal trouble code P0128. Your intake air temperature sensor, coolant temperature sensor and coolant fan could also signal this trouble code, so these should be inspected after you look over your thermostat and coolant level.
What is the code for a bad thermostat?
Thermostat That’s Stuck Open – The most common cause of code P0128 is a leaky or stuck engine coolant thermostat. Faulty Engine Coolant Temperature Sensor – Faulty wiring or a bad sensor can also lead to a P0128 code reading.