Anywho, on a 2010 Dodge Avenger there are two thermostats a 170 and a 200.
Why does my car have two thermostats?
Typically, with two thermostats, one is connected to your car’s AC system and one to the engine cooling system. The thermostats help circulate coolant either through your car’s engine or AC system, along with other intricate parts. Without your thermostats, your car would overheat.
Where is the thermostat located on a Dodge Avenger?
The 2008 Dodge Avenger thermostat is located on the lower coolant line from the radiator. Your car’s thermostat is a vital component that is actually pretty simple. It’s a valve located in Your car’s cooling system.
How do you change the thermostat on a 2010 Dodge Avenger?
The 2008 Dodge Avenger thermostat is located on the lower coolant line from the radiator. Your car’s thermostat is a vital component that is actually pretty simple. It’s a valve located in Your car’s cooling system.
What causes a 2010 Dodge Avenger to overheat?
The most common reasons a Dodge Avenger is overheating are a coolant leak (water pump, radiator, hose etc.), the radiator fan, or a failed thermostat.
How many thermostats does a 2010 Dodge Avenger have?
Anywho, on a 2010 Dodge Avenger there are two thermostats a 170 and a 200.
Why does the LML have 2 thermostats?
Their purpose is more for aerodynamics than engine cooling. The dual thermostat system was designed to accomplish the same temperature control under different load conditions. Instead of manipulation of the air side of the radiator, the coolant flow to the radiator is varied.
Why is my heat not working in my Dodge Avenger?
The most common reasons a Dodge Avenger heater isn’t working are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor.
What is the thermostat housing?
In many engines, the thermostat housing serves as the coolant outlet and is located on either the cylinder block or intake manifold. The main purpose of a thermostat housing is to contain the engine thermostat and provide a coolant outlet to the radiator.
How much does a thermostat cost for a 2013 Dodge Avenger?
Dodge Avenger Thermostat Replacement Cost Estimate. The average cost for a Dodge Avenger thermostat replacement is between $215 and $234. Labor costs are estimated between $74 and $93 while parts are priced at $141.
How do you change a thermostat in a 09 Dodge Avenger?
Dodge Avenger Thermostat Replacement Cost Estimate. The average cost for a Dodge Avenger thermostat replacement is between $215 and $234. Labor costs are estimated between $74 and $93 while parts are priced at $141.
What kind of coolant does a 2010 Dodge Avenger take?
Prestone – DEX-COOL 50/50 Antifreeze / Coolant – Gallon (Part No. AF850)
Where do you put coolant in a Dodge Avenger?
Prestone – DEX-COOL 50/50 Antifreeze / Coolant – Gallon (Part No. AF850)
What kind of antifreeze does a Dodge Avenger take?
Peak 1 Gallon Yellow 50/50 Coolant/Antifreeze.
How does a double acting thermostat work?
This liquid cooling system for internal combustion engines employs a double acting thermostat to prevent coolant temperature fluctuation over a large range of engine loads and speeds and to selectively block coolant flow through the bypass circuit so that the heater and defrost circuit at engine start up and idle will …
Do diesels have thermostats?
Most, if not all, large diesel engines found in trucks and farm equipment employ a dual thermostat system. For the large part, the dual thermostat has replaced grille shutters from old days.
How many thermostats does a 6.7 Cummins have?
The Cummins 5292742 Cross References:
The replacement 200 thermostats are required for the right engine operating temperatures on the Dodge diesel.
How do I know if I need a blower motor or a resistor?
Here are some of the warning signs of a bad heater blower motor resistor: Fan does not work at all, so no air comes out of the vents. Fan only works on some speeds and not others. Fan only works on the highest speed.
Does the blower motor resistor control heat?
The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed.
How do you change a heater core in a 2012 Dodge Avenger?
The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed.
What is the difference between a thermostat and a thermostat housing?
The thermostat housing and the thermostat itself are two different components and do not necessarily need to be replaced together or at the same time. The housing is just a piece that covers the thermostat that also has an opening for a radiator hose which is where the water enters and exits the motor.
What are the signs of a faulty thermostat?
Here are 5 symptoms of a failing thermostat.
- Unusual Temperature Readings. Temperature Gauge. …
- Cabin Temperature Changes. Higher Cabin Temperature / Representation. …
- Coolant Leakage. Leaking Coolant. …
- Strange Noises From The Engine Bay. Noises From The Engine Bay. …
- Heater Malfunction. Heater Malfunction.
Is it OK to run a car without a thermostat?
It may seem like your engine would overheat without a thermostat, but it is not the case. Without a thermostat, a car would never even warm up to operating temperature, much less overheat. Your engine will run at its best when it is at its optimal operating temperature.