Skip to content

Why does my chevy malibu shake when i brake?

The most common reason a car trembles when braking is your brake rotors being warped. Brake rotors wear out around the 70,000-mile mark. Old brake rotors are thin, and damage-prone. One sign you need to replace them is your car shaking when braking.

Why does my car shake when I go to brake?

Over time, brake pads accumulate oil, dirt, or other materials. When this happens, the substances can cause vibrations, particularly when you press the brake pads. Also, over time the rotors get thinner, making them susceptible to damage. During braking, excessive heat is generated and can cause the rotors to warp.

What causes a Chevy Malibu to shake?

The most common causes for Chevy Malibu shaking at high speeds are unbalanced wheels, misaligned wheels, tire damage, bent rim, bad wheel bearing and loose lug nuts. Less common causes are bad axle, worn suspension or steering parts or incorrect tire pressure.

How do you fix brake shudder?

A new set of brake pads may be the easiest way to address your vehicle’s brake shudder. However, in some cases replacing your brake rotors or having them resurfaced will fix the brake shudder. If you’re replacing brake rotors, it is recommended you also consider replacing the brake pads as well.

Can a bad brake caliper cause vibration when braking?

When a brake caliper sticks this will cause the brakes not to release. During this process the brake rotors become overheated and therefore warp out. This will cause you to feel vibration while the vehicle is moving.

What is stabilitrak on Chevy Malibu?

Chevy Malibu owners looking for a way to improve the stability and handling of their vehicle should check out Stabilitrak. This is an electronic stability control system that improves your car’s performance by keeping it stable on the road, while also improving fuel efficiency.

How do you tell if you need new rotors?

Here are 7 Signs your brake rotors need replacing:

  1. Your rotors are blue.
  2. Grooves or scoring on the rotors.
  3. A squeaking or screeching sound.
  4. The car takes too long to break.
  5. Your car starts to vibrate during brakes.
  6. Your ABS system gives you warnings.
  7. Your car service professional recommends new rotors.

How much do new rotors cost?

Rotors cost between $30 and $75 each. Labor to replace rotors and pads is around $150 to $200 per axle. Brake pads and rotors come out to around $250 to $500 per axle.

How do I know when my rotors are bad?

How to Tell if Rotor Is Bad (15 Bad Rotor Symptoms)

  1. Vibration in the steering wheel.
  2. Pulsating brake pedal.
  3. Intermittent brake noises.
  4. Grinding when hitting brakes.
  5. Screeching after brake pad installation.
  6. Out-of-round rotors.
  7. Deep grooves or score marks.
  8. Cracked rotors.

Can bad struts cause shaking when braking?

You may also feel strange vibrations in the steering wheel or hear disturbing clunks when your brake or steer if the shocks and struts are worn. Even if you’re not feeling a rough ride or vibration, you may notice that your car is harder to handle when you travel over dips and bumps.

Is it expensive to fix StabiliTrak?

How Much Does It Cost to Fix the StabiliTrak? Replacing the traction control system, or StabiliTrak, on a car typically costs between $80 and $190. This price includes labor costs, which can range from $30 to $50, depending on the manufacturer.

Can I drive with StabiliTrak light on?

Due to your traction service light being on as well, there is likely an issue with the system. You are absolutely fine to drive the vehicle. Just know these devices to help control the vehicle in a sliding situation are off, and you will need to drive accordingly if in certain conditions.

Can I drive with service StabiliTrak?

Can I Drive My Car if It Says Service StabiliTrak? Yes, you can. However, without that functionality, then you might not be able to maintain control over your steering or braking.

How often do you replace brake rotors?

Ideally, you should have your brake pads replaced between every 10,000 and 20,000 miles, and your rotors replaced between 50,000 and 70,000 miles.

Can I replace brake pads without replacing rotors?

Yes, but it depends on the condition of your brake rotors. If they aren’t damaged or thinned beyond the discard thickness, you can definitely change just the worn brake pads.

How many miles do rotors last?

Your rotors are one of the most durable parts of your car, but the above factors can shorten their lifespan. Expect your rotors to last anywhere from 30,000-70,000 miles depending on the above factors.

How much is a full brake job?

You can expect to pay between $35 and $150 for parts for all four wheels. Labor can vary, but tends to be $80 to $120 per axle, for a total of $115 to $270 per axle. It’s usually a good choice to have your rotors replaced with your brake pads, since worn rotors don’t work very well, even with new pads.

How much does it cost to turn rotors at AutoZone?

AutoZone can charge up to $25 per rotor for this service but often suggest a total replacement citing cost-effectiveness.

Should I replace all 4 rotors?

You do not need to replace all 4 rotors at the same time, but it is recommended to replace the rotors and pads as a set for each axle front or back at the same time. If the front brakes need to be replaced but the rear brakes are not worn out yet, then you do not need to replace the rear brakes.