Skip to content

Where is the fuel pump relay located on a 2014 chevy malibu?

Unfortunately, your car does not have a traditional fuel pump relay. It has what is known as the Fuel pump driver module. The good news is it is a little easier to test the fuel pump from this location as there are only a one ground and power circuit you will need to pay attention to when testing the fuel pump.

Where is the fuel pump relay on a Chevy Malibu?

The 2013 Chevy Malibu fuel pump relay is located in the fuse box. To get to the fuse box look to the left of the steering wheel look for a small seam or crack along the dash. Using a screwdriver or prybar You will want to pop this open. On the inside, You will find a bunch of fuses.

Where is the fuel pump relay switch located?

Location. Most fuel-pump relay units are located under the dashboard near the steering column. In some cases, the unit is located in the area where the steering column is mounted or near the engine’s firewall.

Where is the fuel pump control module located on a 2014 Chevy Malibu?

Location. Most fuel-pump relay units are located under the dashboard near the steering column. In some cases, the unit is located in the area where the steering column is mounted or near the engine’s firewall.

Where is the fuel pump relay located on a 2016 Malibu?

It is located on the driver’s side of the instrument panel, behind the cover to the left of the steering wheel.

Where is the fuel pump relay located on a 2013 Chevy Malibu?

It is located on the right side of the luggage compartment. It is under the carpet.

Where is the fuel pump control module located on a 2013 Chevy Malibu?

The 2013 Chevy Malibu fuel pump control module location is on the right side of the luggage compartment, under the carpet. Having the fuel burn efficiently is the key to maximizing Your miles per gallon.

Where is the fuel pump relay fuse?

In most car models, the fuel pump relay is located in a fuse box somewhere under your dashboard, but it can also be located in the fuse box in the engine bay. The engine’s or the dashboard fuse box is usually a long black box containing a fuel pump relay and various other fuses and relays.

How do I know if its the fuel pump or relay?

Let us dig deeper into the signs of a bad fuel pump relay.

  1. Check Engine Light. …
  2. Car Won’t Start. …
  3. Rough Idle &amp, Engine Stalls. …
  4. Bad Fuel Pump. …
  5. Poor Engine Performance. …
  6. Silent Fuel Pump Noise. …
  7. Burnt Fuel Pump Relay. …
  8. Exhaust System Issues.

How do I know if my fuel pump relay is bad?

Usually a bad or failing fuel pump relay will produce a few symptoms that can alert the driver of the issues.

  1. Engine stalls. One of the first symptoms of an issue with the fuel pump relay is an engine that suddenly stalls. …
  2. Engine does not start. …
  3. No noise from the fuel pump.

Where is the fuel pump control module located?

The module is typically installed on or very close to the fuel pump, and in the early years of the component’s use, this practice led to a design fault. Manufacturers, including Ford, initially placed the module inside the vehicle immediately above the fuel pump, typically just beneath the floor pan.

What is fuel pump control module?

The Fuel Pump Driver Module controls the voltage delivered to a vehicle’s fuel pump. By controlling the voltage, the module maintains optimal fuel pressure and fuel delivery to the engine throughout its full operating range.

What does code po69e mean?

Code P069E stands for Fuel Pump Control Module (FPCM) Requested MIL Illumination. The fuel pump control module (FPCM) is the computer that monitors the operation of the fuel system. It receives input regarding desired fuel pressure from the engine control module (ECM).

Where is the fuse box located in a 2014 Chevy Malibu?

Fuse box location

It is located on the driver’s side of the instrument panel, behind the cover to the left of the steering wheel.

Where is fuse box on Chevy Malibu?

Fuse box location

It is located on the passenger side of the vehicle, on the lower portion of the instrument panel near the floor, behind the cover.

Where is the fuse box in a 2014 Malibu?

The main fuse box in a 2014 chevy malibu is located under the hood near the firewall.

Does a 2014 Chevy Malibu have a fuel filter?

The fuel filter is always going to be found between the fuel tank and the engine. For most vehicles, the fuel filter is located inside the top of the fuel tank, right where it connects with the fuel line, although on some cars if might be elsewhere along the fuel line.

Where is the fuel pump on a 2015 Chevy Malibu?

Located inside your fuel tank, a fuel pump has a small electric motor to make sure that pressurized gasoline flows to the engine to power the vehicle.

Where is the fuel pump located on a 2012 Chevy Malibu?

it’s in the fuel tank. pricey also,around $300.00-$500.00 if you buy it and you put it in.

Where is the fuel filter on a 2013 Chevy Malibu?

Like most modern cars, the filter is located inside the pump assembly in the fuel tank.

Does a 2015 Chevy Malibu have a fuel filter?

Like most modern cars it’s built into the fuel pump module that is in your tank. It isn’t intended to be replaced unless you replace the whole module.

Where is the fuel pump module located on a 2018 Chevy Malibu?

You should find the fuel pump power control module in the trunk on the passenger side.

Where is the relay switch located?

It can be in the fuse box (also called a power box), the fuse panel under the dash, or on the right fender. Most cars will have it located under the hood, inside the long box with a black cover. Often called the fuse box, this is where a vehicle’s fuses and relays are mounted.

Will a fuel pump work without a relay?

It depends on how long the wire run is, how thick the wire is, how much current the pump draws, and what other types of controls you want on the pump circuit. Low current pump, short heavy wire, no funky control requirements means you can go without a relay. The opposite means a relay would be nice.

How do you jump a fuel pump relay on a Chevy truck?

How To Jump Fuel Pump Relay On A Chevy Truck?

  1. Step 1: Locate the Relay. For this, you have to first make sure that you have parked your car in a flat, good spot. …
  2. Step 2: Disconnect Terminals. Now, it is time to disconnect the battery terminals. …
  3. Step 3: Connect Jumper Cables. …
  4. Step 4: Start Engine. …
  5. Step 5: Check Lights.

What happens when the fuel pump relay goes out?

If your vehicle’s fuel pump relay is on the fritz, then you might start to notice some acceleration issues when the fuel pump relay doesn’t kick on and off like it should. This rough acceleration can quickly turn to engine stalls, and eventually you might not be able to start your vehicle at all!