Skip to content

What size is the drain plug on a 2016 chevy cruze?

SAE/Metric: 10mm head size. 0.63″ Shank length.

What size is Chevy Cruze drain plug?

Dorman – Autograde – Pilot Point Drain Plug, M14-1.50 Thread, 10mm Head (Part No. 090-211CD)

What size is a Chevy Cruze oil plug?

Notes: M14 x 1.5 Thread size.

What size are Chevy drain plugs?

All plugs have 14mm hex – just one wrench works for all.

What size is my drain plug?

Oil drain plug diameter is best measured in millimeters using digital calipers. Measure the width of the plug across the base of the plug, at the widest part of the threads.

What size is the drain plug on 2018 Chevy Cruze?

Dorman – Autograde – Oil Drain Plug M12-1.75, 15mm Hex Head T45 Torx (Part No. 090-948)

What size is the drain plug on a 2011 Chevy Cruze?

Notes: M14 x 1.5 Thread size.

What size is the oil drain plug on a 2017 Chevy Cruze?

Dorman – Autograde – Oil Drain Plug M12-1.75, 15mm Hex Head T45 Torx (Part No. 090-948)

How much oil does a 2016 Chevy Cruze take?

Engine Oil

SAE 5W-30 is preferred. Capacity: With filter 4.2 quartsAfter refill check oil level.

How do you remove stripped thread from oil drain plug?

How to Remove a Stripped Oil Drain Plug

  1. Be sure that you order a new drain plug for your car before removing the stripped one. …
  2. Use a pair of round-jaw vice grip pliers. …
  3. Turn your pliers counterclockwise – to the left. …
  4. Finally, you’ll feel the drain plug begin to loosen.

Are all oil drain plugs the same size?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In addition, sockets are available in various shapes to fit the different bolt heads: six points (hexagon), eight points (double square), and 12 points (double hexagon).

What size is oil drain plug on Chevy 350?

Stock drain plugs require a 9/16″ wrench to fit the hex head.

What size are Chevy oil pan bolts?

Oil Pan Bolts, 5/16-18, Head Size 3/8 In.

What size bolt is a drain plug?

When removing an oil drain plug, most people use a socket wrench with the correct size socket since most cars have 19mm or 17mm bolts.

What size is the oil drain plug on a 2016 Chevy Silverado?

Dorman – Autograde – Oil Drain Plug Pilot Point M12-1.75, Head Size 15mm (Part No. 090-175.1)

How much is a drain plug?

The general range is between $100 and $350, but there are some vehicles that cost more. You can get an oil pan gasket replacement for between $40 and $150. The part is not the most expensive part of the repair, but the labor can be very intensive.

What size is the drain plug on a 2015 Chevy Cruze?

Notes: M14 x 1.50 Thread size, Pilot point.

How many quarts does a 2012 Chevy Cruze take?

With filter 4.2 quartsAfter refill check oil level.

How much oil does a Chevy Cruze take?

The 2016 Chevy Cruze came factory standard with a 1.4 L 4Cylinder engine and there was no option to upgrade to anything else. This engine will have a motor oil capacity of 4.2 US quarts when the filter is included and 3.9 US quarts when it is not. You will need to use 5W-30 synthetic motor oil for this vehicle.

How much oil does a 2017 Chevy Cruze take?

Engine Oil

SAE 5W-30 is preferred. Capacity: With filter 4.2 quartsAfter refill check oil level.

Where’s the oil filter on a 2014 Chevy Cruze?

The oil filter in a 2014 chevy cruze is located under the hood on the front right corner of the engine.

How many quarts of oil does a 2015 Chevy Cruze take?

Engine Oil

SAE 5W-30 is preferred. Capacity: With filter 4.2 quartsAfter refill check oil level.

Where is the oil filter on a 2015 Chevy Cruze?

The oil filter is located under the hood, on the right side of the engine. You will use a proper socket and wrench to loosen and remove the oil filter canister. Take out the old filter from the filter cap.

How do you change the oil on a 2017 Chevy Cruze?

The oil filter is located under the hood, on the right side of the engine. You will use a proper socket and wrench to loosen and remove the oil filter canister. Take out the old filter from the filter cap.