Skip to content

How much does it cost to replace a serpentine belt on a 2013 chevy cruze?

The average cost for a Chevrolet Cruze serpentine belt replacement is between $96 and $115. Labor costs are estimated between $70 and $88 while parts are priced at $26. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How often should you change a serpentine belt on a Chevy Cruze?

Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage. Squealing noise, belt slippage, visible belt damage.

How expensive is it to replace a serpentine belt?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.

How do I know if my serpentine belt is bad?

A squealing or noisy belt is one of the most common symptoms of a slipping or worn serpentine belt. Squealing can be more pronounced when you’re climbing a hill and running your heater or air conditioning at the same time. Squealing can also occur after you drive over deep puddles or have an undercarriage car wash.

Can you drive with broken serpentine belt?

Under no circumstances can you drive a vehicle without a serpentine belt because the serpentine belt serves the important function of delivering antifreeze to important parts of the engine. The serpentine belt drives the water pump, and without it, there is insufficient coolant flow to maintain the engine temperature.

How much does it cost to replace a serpentine belt on a Chevy Cruze?

The average cost for a Chevrolet Cruze serpentine belt replacement is between $96 and $115. Labor costs are estimated between $70 and $88 while parts are priced at $26. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed.

What is the serpentine belt for on a Chevy Cruze?

The 2014 Cruze serpentine belt is responsible for transmitting rotational engine power to auxiliary systems like the AC compressor, alternator, and water pump.

What does a worn serpentine belt sound like?

Think you might have a bad serpentine belt? A telltale sign is that the engine squealing comes from the front of the vehicle and that it persists. Belt squeaking is also especially pronounced when accelerating, on startup, and when making a U-turn. The noise is loud and sounds like a squeal, loud chirp, or squeak.

Can I change a serpentine belt myself?

Automatic belt tensioners, standard in most cars now, make changing a serpentine belt a simple DIY repair. Follow the clear photos and step-by-step instructions and you’ll be done in 15 minutes.

Is a serpentine belt the same as a timing belt?

Timing Belt. Don’t get confused—a serpentine belt is not the same thing as a timing belt. The serpentine belt and timing belt have very different functions in your vehicle. The timing belt is located inside the engine and keeps the crankshaft and camshaft in sync.

How long does it take to replace a serpentine belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

How do I know if I need a new serpentine belt?

The easiest way to know that a new serpentine belt is needed is if you hear it squealing while the engine is running. A heavy rainstorm might cause a bit of squealing, but if there are any fluid leaks, it’s time to replace it right away.

How long can you drive with a bad serpentine belt?

There are a couple of factors influencing the answer to this question, but on average, your car should be able to run between 20-90 minutes with a broken serpentine belt. The engine will overheat faster without a functioning cooling system on a hot day, so your driving window is less.

Can you start a car without a serpentine belt?

The short answer is yes, your car will start even if the serpentine belt is broken or missing. To get the car going, the battery sends power to your starter motor. The starter motor provides enough power to get your engine moving and the combustion process started.

What happens if belt breaks while driving?

When the timing belt breaks, the crankshaft will continue to spin at 1000 rotations per minute, while the camshaft will stop turning. As a result, the pistons will continue to rise and fall in their cylinders, but they will strike closed valves.

What would cause a serpentine belt to break?

The most serious failure is when the serpentine belt breaks completely. This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt. A failed bearing in a pulley being driven by the serpentine belt will also cause the belt to break.

How do you change the serpentine belt on a 2016 Chevy Cruze?

The most serious failure is when the serpentine belt breaks completely. This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt. A failed bearing in a pulley being driven by the serpentine belt will also cause the belt to break.

How do you change a timing belt on a 2014 Chevy Cruze?

The most serious failure is when the serpentine belt breaks completely. This is usually the result of a belt in poor condition, or a problem with one of the accessory components being driven by the belt. A failed bearing in a pulley being driven by the serpentine belt will also cause the belt to break.

How much does it cost to replace a serpentine belt and tensioner?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146. Taxes and fees are not included in the estimate.

How much does it cost to change a car belt?

Of course, it depends on your make and model as well as labor costs, but in general a replacement serpentine belt costs around $70-$200 (plus taxes and fees), including around $50 for the belt and around $150 for the labor.