Skip to content

How much does it cost to replace a water pump on a bmw?

Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).

How much does it cost to fix a water pump on a BMW?

How much does a BMW water pump replacement cost? Typically in the range of $350 to over $850 depending on the difficulty and cost of the new pump.

Is it worth replacing water pump?

About Water Pump Replacement

The water pump is an essential component that keeps the coolant circulating, a critical role in ensuring that the engine maintains the proper operating temperature. Without coolant being circulated, the engine will overheat, leading to premature wear and damage.

How long does it take to replace BMW water pump?

You should replace the thermostat and U shaped pipe between the thermostat and the water pump. WP takes well more than 2 hours. Without a lift you’ll spend nearly 2 hours getting the car off the ground, moving everything out of the way and then draining the coolant. 4-6 hours is about right.

Why do BMW water pumps Fail?

The most common cause of water pump failure in BMW cars is simply from age and heavy use of the vehicle. Over time, most parts in a car start to break down through constant wear and tear. Since the water pump is made of plastic, it will slowly degrade over the lifetime of your vehicle.

How do I know if my BMW water pump is bad?

Signs that can indicate a failing water pump include:

  1. An apparent coolant leak near the front of your vehicle.
  2. Whining noises coming from under the hood, which can indicate a broken water pump pulley.
  3. Overheating engine.
  4. Steam coming from the radiator.
  5. Check engine light has turned on.

How much does it cost to fix water pump in car?

Most often your water pump replacement cost will be between $40 and $80 dollars. Exceptions to this price are the electric water pumps which will cost between $150 and $500 depending upon the model of car. A serpentine driven water pump is fairly accessible, so installation will range between $80 to $150.

How long does it take to replace a water pump in a car?

Fixing a broken water pump can take anywhere from two hours to most of a day. A simple replacement should take around two hours, but more complicated work trying to fix a water pump (which will save you money on parts) can take four or more hours.

How many years does a water pump last?

The average lifespan of a water pump is similar to the lifespan of a timing belt. They usually last 60,000 to 90,000 miles with the proper care. However, some cheaper water pumps may begin leaking at as low as 30,000 miles.

How can you tell when a water pump is going bad?

Five Signs Your Water Pump Is Failing

  1. Overheating. A dead or dying water pump cannot circulate coolant through your vehicle’s engine and, as such, the engine will overheat. …
  2. Coolant Leaks. Coolant leaks from the water pump are common and a clear sign that it’s time to replace the pump. …
  3. Corroded Water Pump. …
  4. Whining Noises.

How much does a water pump cost?

The average water pump replacement cost is between £250 – £700 in the UK. The cost of water pump, gaskets and coolant is around £70 – £250, with the bulk of the cost being labour costs, which are around £180 – £450 (at an average hourly rate of £60 – £150 and 3 hours work).

How long does it take to replace a water pump gasket?

Don’t worry about seepage from the weep hole

Some seepage from the weep hole is completely normal with a new water pump: a mechanical seal has a break-in period of about ten minutes (meaning that it takes about ten minutes of operation for the seal to properly seal itself).

How long does it take to replace a well pump?

From start to finish, the average service time is 3-4 hours.

Can you drive with a faulty water pump?

If your car’s water pump is bad, you need to get it replaced quickly or you’ll risk damaging your engine. Depending on a few factors, you can probably drive your vehicle 5-20 miles with a faulty water pump, which should be enough to get you to the nearest mechanic to replace it.

How often should water pump be replaced?

Typically, the recommended interval for replacing the water pump is every 60,000 to 100,000 miles, depending on various factors, such as the car model, road and weather conditions, and driving behavior. Therefore, if you plan to invest in a used car, ensure you verify whether the seller replaced the water pump.

What noise does a failing water pump make?

Whining or Groaning Noise

A whining or groaning noise usually means that either a drive belt is loose, or the water pump pulley is bad. It may surprise your customer that a pulley could fail.

Do BMW Water Pumps leak?

When this type of water pump failure occurs, coolant may leak out of the space around the seal. Because the water pump is located under the hood, this may cause puddles of coolant to form on the ground beneath the front of your vehicle.

What happens when water pump dies?

Catastrophic failure of your water pump will cause either a complete or partial loss of coolant flow and rapid overheating. If this happens to your vehicle, it may be accompanied by engine noise or a broken engine belt, but will definitely result in your engine temperature gauge rising quickly.

What does BMW water pump do?

The Function of the Water Pump

The water pump is in charge of pumping the coolant through the engine block, hoses, and the radiator. By doing so, your BMW is able to remain at the optimal temperature level in order to function properly.

When replacing a water pump What else should you replace?

So when the water pump must be replaced, it is a good idea to go ahead and also replace the timing belt, timing belt tensioner and idler pulleys.

How much does a timing belt and water pump replacement cost?

Repairs commonly related to water pump replacement

Replacement Type Price Range
Timing Belt Replacement Cost $400 – $1500
Timing Chain Replacement Cost $500 – $2000
Coolant Replacement $50 to $150
Serpentine Belt Replacement $50 to $200

How hard is it to replace a water pump?

While removing the pump is not difficult, you must have experience removing and replacing timing belts and their various components. It takes just as much work to get down to the timing belt as it does the water pump, therefore you should plan on replacing the belt at the same time.

How much does it cost to replace a water pump on a Subaru?

Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).

How much does it cost to replace a water pump on a Toyota Camry?

Toyota Camry Water Pump Replacement Cost Estimate. The average cost for a Toyota Camry water pump replacement is between $413 and $512. Labor costs are estimated between $183 and $231 while parts are priced between $230 and $280.

What causes water pump failure?

Contaminated coolant, non-compatible coolant, or mixing coolants of different chemistries leads to premature water pump failure. Harmful contamination is common in systems that are not properly maintained.

Will Stop leak fix a leaking water pump?

It works on plastic, aluminum, and metal radiators in heater cores, engine cooling jacket, gaskets (including head gaskets), water pumps, and freeze plugs.

Do water pumps wear out?

The water pump is comprised of multiple gaskets and seals that keep coolant contained and ensure that consistent flow of coolant is delivered from the radiator to the engine. Eventually, these gaskets and seals will wear out, dry up, crack or break entirely.

Should you replace thermostat with water pump?

The answer is absolutely because the thermostat itself can be damaged if there is an episode of overheating and, of course, a water pump failure is often associated with overheating.

How do you test a car water pump?

With the engine off, open your hood and locate the water pump pulley. With gloves on, grab it and wiggle it back and forth. There should be no movement, if there is, this along with the noise is a good indication you may have a water pump problem.

How do I know if I have a bad water pump or a head gasket?

A leaking radiator, overheating, white-colored or sweet-smelling exhaust and green-tinted spark plugs are all signs the head gasket is wearing, broken or on its way to that status. When you see white smoke coming from your tailpipe, it is time to stop in at Wiygul Automotive Clinic for an inspection.

Can a water pump be repaired?

Fixing a water pump refers to the process of replacing an essential part of your vehicle’s cooling system. It is one of the least complicated procedures to carry out, as far as auto repairs go, so almost anyone who can operate a wrench can do this on their own.

How long does it take to replace a timing belt and water pump?

How long does a timing belt and water pump replacement take? The average time taken for a water pump and timing belt change is between 3 to 6 hours.

How do you stop a water pump from leaking?

Pour a liquid radiator/water pump stop-leak product, such as Bar’s Liquid Radiator Stop Leak, into your vehicle’s radiator. The radiator is usually located in the front of the engine. The liquid stop-leak product poured into the radiator will flow to the water pump seal and possibly seal or slow the leak.

How do you fix a leaking water pump gasket?

Water Pump Leak Repair: Water Pump Removal

  1. Flush cooling system if necessary.
  2. Drain coolant.
  3. Remove engine belts.
  4. Remove other components to gain access to water pump bolts.
  5. Remove the water pump.
  6. Replace gasket or o-ring and install new pump.

Do I have to drain coolant when replacing water pump?

There won’t be a need to drain any of the coolant’s radiators. The engine block needs to be removed. Changing the pump in such a way will help you not need to drain the radiator while draining the engine block.

How much is a well pump to replace?

The average cost of replacing a well pump is between $900 and $2,500. The cost varies based on the well size, materials used, and installation required. For example, replacing a shallow well pump will cost less than a deep well submersible pump.

How much does it cost to replace a well pump and pressure tank?

Replacing a well pump and pressure tank together costs $800 to $2,300.

Cost To Replace Well Pressure Tank.

Item Average Cost
Well Pressure Tank $150 – $300
Installation Labor $125 – $200
Total $275 – $500

How much does it cost to install a submersible well pump?

If you’re installing a new well, you’ll need a pump to make use of it. The average cost to replace a well pump is between $850 and $2,250, according to Angie’s List.