Skip to content

How much does it cost to replace a serpentine belt on a bmw?

Labor costs are estimated between $115 and $145 while parts are priced between $42 and $53. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed.

How long do BMW serpentine belts last?

How Long Do Serpentine Belts Last? Most modern serpentine belts are able to last anywhere between 50,000 and 100,000 miles, which is a fairly big window of time.

How much does it cost to replace a BMW belt?

The real cost is in the labor, because a lot of parts need to be disassembled to get to the belt. Shopping around to get a few quotes is your best bet to get the best deal, but you can expect to pay anywhere from $409 to $919 (including parts and labor).

Are serpentine belts expensive to replace?

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.

How much should it cost to replace a serpentine belt?

But what does a serpentine belt replacement cost? Of course, it depends on your make and model as well as labor costs, but in general a replacement serpentine belt costs around $70-$200 (plus taxes and fees), including around $50 for the belt and around $150 for the labor.

When should I replace my BMW drive belt?

BMW has a standard maximum mileage for timing belts which is 105,000 miles. A faulty timing belt can cause loss of power, fuel economy, engine misfiring and vibrations.

When should I replace my BMW belt?

BMW has a standard maximum mileage for timing belts which is 105,000 miles. A faulty timing belt can cause loss of power, fuel economy, engine misfiring and vibrations.

How much does it cost to replace a pulley on a BMW?

The average cost for a BMW 328i drive belt idler pulley replacement is between $192 and $266. Labor costs are estimated between $138 and $174 while parts are priced between $54 and $92.

How much does it cost to replace timing chain BMW?

The Best in Auto Repair

The average cost for a BMW 328i timing chain tensioner replacement is between $822 and $972. Labor costs are estimated between $574 and $724 while parts are priced at $249. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

Do BMW’s have a timing belt?

BMW stopped using timing belts many years ago most modern BMW’s do not have timing belts. The professional technicians at German Car Depot are trained to spot problems with your timing belt before major problems happen. GCD will check you car’s timing belt for signs of wear at every B service .

What does a worn serpentine belt sound like?

Symptoms of a broken serpentine belt include loud slapping, squealing or knocking noises coming from under the hood. The battery-shaped charging system warning light might also come on because the alternator will stop charging the battery.

How long does it take to fix a serpentine belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

How do I know if I need to replace my serpentine belt?

The easiest way to know that a new serpentine belt is needed is if you hear it squealing while the engine is running. A heavy rainstorm might cause a bit of squealing, but if there are any fluid leaks, it’s time to replace it right away.

Can I replace a serpentine belt myself?

Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.

Can you drive with broken serpentine belt?

Can I Continue Driving My Car If the Serpentine Belt Is Broken? Technically, yes, you can continue driving your car, but not for long. For instance, without power steering, you’re likely to get exhausted very quickly from driving.

What are the signs of a timing belt going bad?

Symptoms of a Bad or Failing Timing Belt

  • You Hear A Ticking Noise Coming From The Engine. …
  • Your Car’s Engine Won’t Turn Over. …
  • You Notice An Oil Leak Near The Motor. …
  • You Experience Exhaust Issues. …
  • Your Revs Start Acting Up.

Is drive belt same as serpentine belt?

The serpentine belt goes by a couple of different names: accessory belt and drive belt. The belt is long and snakes through several pulleys. That’s why it’s called a serpentine belt. You can find the serpentine belt on the front or side the engine.

How do I know if my pulley serpentine belt is bad?

Symptoms of a Bad Timing Belt Pulley

  1. Shaky, or Otherwise Incumbered Belt Motion. …
  2. Visible Wear On Your Pulleys. …
  3. Belt “Squealing” or “Whining” Noises. …
  4. Knocking or Slapping Noises. …
  5. Damaged Bearings or Pulleys. …
  6. What if the Pulley Seems Fine, But There’s Still an Issue? …
  7. Need to Replace Your Timing Belt Pulleys?

Will serpentine belt make noise?

Worn/Cracked Serpentine Belt – Serpentine belts have grooves which fit into grooves in the pulleys. Over time, the friction wears down these grooves, resulting in a loose fit. A worn belt can, therefore, begin to slip, which is one of the causes the squeal.

What are pulleys on a BMW?

A BMW’s belts &amp, pulleys take the energy from the engine to power auxiliary BMW systems. Worn out BMW pulley can be loud, annoying, or completely fail and seize. A failed BMW serpentine belt can leave you without accessories like air conditioning, power steering, or stranded overheating.

Which BMW engines have timing chain Problems?

Different issues have been seen in the BMW engines like the timing chain problem. These issues have been prevalent in some variants of the BMW 320d 2.0 Diesel, 520D 2.0 Diesel and X5 330D 3.0 Diesel.

How long should a BMW timing chain last?

Replacement Guidelines

BMW and MINI use Timing Chains in almost every model of engine that they produce.It is recommended to replace your timing chain before failure as repair prices can become very high from internal engine damage. From experience the life of these timing chains are 90,000 miles or 9 years.

Do BMW timing chains need to be replaced?

BMW timing chains are engineered for the life of the engine and never need maintenance or replaced.

How long do BMW engines last?

You can expect BMW engines to last well over 200,000 miles when operated in accordance to BMW’s recommended maintenance schedule, which includes regular oil and filter changes. Most complaints about engine reliability occur when owners don’t carry out the basic maintenance that we’ve mentioned.

Are BMW parts expensive to replace?

Yes, BMW’s maintenance cost after the warranty is more expensive than many other brands – luxury or not. A BMW can cost about $5,000 more to maintain over a 10-year period than a Mercedes-Benz, and $12,000 more than a Toyota.

Why do BMWs have so many problems?

Why do BMWs have so many problems? BMWs are complex, high-performance cars with demanding maintenance requirements. The main reason that BMWs have problems is because owners skip expensive routine maintenance and don’t follow the guidance laid out in the owner’s manual.

How much does it cost to replace a serpentine belt and tensioner?

The average cost for a drive belt tensioner replacement is between $211 and $239. Labor costs are between $73 and $93, while parts are priced between $138 and $146.

Can a car run without a serpentine belt?

Under no circumstances can you drive a vehicle without a serpentine belt because the serpentine belt serves the important function of delivering antifreeze to important parts of the engine. The serpentine belt drives the water pump, and without it, there is insufficient coolant flow to maintain the engine temperature.

Why is my brand new belt squealing?

Belt or Pulley Misalignment

What is this? Belt or pulley misalignment is a common issue that causes changed serpentine belts to still squealing. Misalignment means that the grooves on your belt are not aligned with the ones on your pulley. It also tells that you shift the belt a bit in or out in one of the pulleys.

What happens when a serpentine belt fails?

If your serpentine belt wears out, becomes damaged or contaminated, or breaks, engine accessories will not be able to spin at the proper speed, leading to decreased power to the electrical system.

How do I test my serpentine belt?

Look for Wear Signs

  1. Look for glazing on the top of the belt, as well as the grooves. …
  2. Check for fraying and cracking on the top and edges of the belt, as well as on the belt ribs. …
  3. Check the serpentine belt’s tension by finding the longest run between drive pulleys and pressing down on the middle of the belt.

What happens if belt breaks while driving?

When the timing belt breaks, the crankshaft will continue to spin at 1000 rotations per minute, while the camshaft will stop turning. As a result, the pistons will continue to rise and fall in their cylinders, but they will strike closed valves.

Will my car start if the alternator belt is broken?

The short answer is yes, your car will start even if the serpentine belt is broken or missing. To get the car going, the battery sends power to your starter motor.