Skip to content

How much does a bmw drive shaft cost?

In most cases, a new drive shaft costs somewhere between $300 and $1300. Fortunately, it only takes about an hour to replace it. A repair usually costs much less, around $200 to $300 including parts and labor, but this also depends on how many parts need to be replaced.

How much does it cost to fix a BMW drive shaft?

Usually, the Drive Shaft Repair costs will differ based on what caused the issue and how fast it can be repaired. If you just have to replace it, that would be anywhere from $500 to $1000. However, you can also expect the cost of the parts to be around half that number and the labor costs around $200.

How much is a drive shaft on a BMW?

Your One-Stop Shop For Trusted BMW 328i Drive Shaft Products

Advance Auto Parts carries 30 Drive Shaft parts from top brands with prices ranging from $14.99 to $807.99. Beyond great prices, we stock trusted brands manufacturing all types of Drive Shaft products for your BMW 328i.

How much does it cost to replace a driveshaft?

Driveshaft Replacement Cost

On average, you can expect to pay anywhere from $400 to $1,260 total but it can easily approach close to $2,000 for some vehicles. If you have a four-wheel drive vehicle, you may have two driveshafts but in most cases, only one will need to be replaced.

How much does it cost to have a drive shaft made?

Driveshaft Labor and Part Costs

Front driveshafts are commonly between $150 and $250, the larger rear shafts start around $250 and can reach $400 and above, possibly more for a two-piece.

What causes drive shaft failure?

Improper stiffness matching between the left and right smooth shafts, which results in a larger torque transmitted to the right spline, is the root cause of the drive shaft failure.

Can you drive with a broken drive shaft?

It is not safe to drive with a bad driveshaft because the driveshaft is responsible for transferring the torque and engine rotation into vehicle movement. If your driveshaft is failing or has already failed, you won’t be able to drive your vehicle any further.

How long does it take to replace drive shaft?

even a novice should have it done in about 2-3 hours taking your time and following the manual.

How long does a drive shaft last?

While there is no set lifespan of a driveshaft, it typically can last about 75,000 miles. Keep in mind depending on the vehicle, and wear and tear you may get much less or much more.

Is it hard to replace a driveshaft?

Replacing a driveshaft is usually a relatively straightforward affair if you have the tools and the know-how. A driveshaft is a long shaft comprised of tubes, joints, and (in some cases) a center support bearing.

How do I know if my drive shaft is out of balance?

SOME COMMON SIGNS OF A FAILING DRIVESHAFT

  1. INTENSE VIBRATIONS AND SHUDDERING. Vibrations and shuddering are the most common sign of a failing driveshaft. …
  2. UNUSUAL NOISES. Unusual noises are another indicator of a worn drive shaft. …
  3. SHUDDERING DURING ACCELERATION. …
  4. TURNING PROBLEMS.

What is the most common drive shaft problem?

Worn or broken U-joints are a common driveshaft problem. If you know where to look, you can often check the U-joints yourself. Simply put the vehicle in park, put the vehicle into neutral, and then move the U-joint yokes back and forth. Too much movement is an indication that you should take it in for replacement.

How do you test a drive shaft?

Worn or broken U-joints are a common driveshaft problem. If you know where to look, you can often check the U-joints yourself. Simply put the vehicle in park, put the vehicle into neutral, and then move the U-joint yokes back and forth. Too much movement is an indication that you should take it in for replacement.

Is drive shaft connected to transmission?

Driveshaft — This is the shaft that is connected to the transmission and is the first component in transferring power to the differentials, axle shafts and wheels.

Is it OK to drive without front drive shaft?

Can you drive a 4WD truck without a front or rear driveshaft? Yes, this is possible, if you drive a traditional 4WD with a lockable center differential. Remove the damaged drive shaft and lock the center differential. This will allow the transfer box to transfer power to the front or rear driveshaft.

What happens if my front drive shaft breaks while driving?

If your driveshaft breaks while driving, you will end up losing the traction that the drive shaft provides. You will also lose stability in your car since it can no longer rely on its wheelbase. If you are unlucky, this could mean a complete loss of control of your vehicle and possible accidents.

Can a drive shaft make noise?

Another symptom of driveshaft issues is loud clunking noises. These noises are usually produced by worn-out u-joints. The ability of your driveshaft to rotate correctly is altered if your vehicle has a faulty u-joint. Lack of u-joint lubrication can cause squeaking noises when you drive at low speeds.

What does it cost to replace CV joints?

The average CV joint replacement cost is between $150 and $850, depending on the car model and labor costs. The CV joint price is between $50 and 150$, while the labor cost of a CV Joint replacement is between $100 and $700. Several factors will affect the total cost if you need to get your vehicle’s CV joint replaced.

How many drive shafts does a car have?

Broadly speaking, you will be able to find at least two drive shaft for your car. Depending on your car model, you can find the drive shafts next to your front wheels or rear wheels or even both (which makes it 4 drive shafts).

Can a driveshaft be balanced?

In order for the driveshaft to be properly balanced, it must remain completely intact, so make sure that the slip yoke, U-joints, and flanges are all still connected to the driveshaft when it is removed.

Do all cars have drive shafts?

Drive shafts are used differently in different vehicles, varying greatly in cars with distinct configurations for front-wheel drive, four-wheel drive, and the previously mentioned front-engine rear-wheel drive. Other vehicles also use drive shafts, like motorcycles, locomotives, and marine vessels.

How do you replace a drive shaft?

Drive shafts are used differently in different vehicles, varying greatly in cars with distinct configurations for front-wheel drive, four-wheel drive, and the previously mentioned front-engine rear-wheel drive. Other vehicles also use drive shafts, like motorcycles, locomotives, and marine vessels.

Is drive shaft part of powertrain?

A car’s powertrain refers to the critical components that produce the power for a car and deliver it to the wheels. These parts include the engine, transmission, differential, axle shafts, and, depending on whether a car is front-wheel, rear-wheel, or all-wheel drive, the transaxle, driveshaft, and transfer case.

Can I drive my BMW without front drive shaft?

If you can lock your center differential, then yes, you can safely drive without a front drive shaft.

Can I remove my CV axle and still drive?

Yes you can drive your truck with out cv joints. But you do need part of the cv joint . If that makes any sence. If you break a cv joint pull it apart and remove the joint of the cv closes to the wheel.Be sure to remove the other parts of the cv joint not used.

How much does a drive shaft disconnect cost?

The price for a Remco drive shaft disconnect starts at $750 + installation, which requires modifying and re-balancing the existing drive shaft as part of the job.

What are some signs of U joint failure?

A bad u-joint can cause a clunking sound or jerkiness while driving, particularly when letting off of and pressing the accelerator. A bad u-joint can also cause vibration at certain speeds, emanating from the center or rear of the vehicle.